Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

As we find more info I add it to the LS thread in my signature.

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Excellent. I'm in the middle of putting together a spreadsheet of part numbers that I used, and any others that are relevant that I come across, in hopes of coming up with a list of minimum parts needed to do a swap.

Your thread is killer BTW!!! :metal:

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

right on! that is a good article. i'm going through it now

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Gee another expensive part i need to buy........ :lol:

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Working on another one now. Don't know if it should be added to that one or on its own.

I am trying to put together a GM parts list for connectors and pins for all the harness connectors in case anyone wants to build their own harness or repair broken connectors. Its turning out to be a daunting task. All I have info for is a 2005 5.3 and I only have 80% of the connector pictures?


http://i49.photobucket.com/albums/f2...tionsensor.jpg

Accelerator pedal position sensor
Connector Part Information • 15318071
• 10-Way F Metri-Pack 150 Series (GY)
Pin Wire Color Circuit No. Function
A GY 1273 Low Reference
B PU 1272 Low Reference
C L-BU 1162 APP Sensor 2 Signal
D TN 1274 5-Volt Reference
E BN 1271 Low Reference
F D-BU 1161 APP Sensor 1 Signal
G WH/BK 1164 5-Volt Reference
H -- -- Not Used
J YE/BK 1275 5-Volt Reference
K D-GN 1163 APP Sensor 3 Signal

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Looks like you probably have what I have?

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Very similar but I saved yours anyway. Might be easier to just use your links in my thread also.

I didn't look but does yours have the transmission connectors, oil pressure, and the engine harness to coils connectors? Those weren't included in what I had and I had to find them. If you don't have those I can forward them to you in an email. Mine are in a less user friendly format.

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

It has:

Transmission:
AT Inline 20-way connector. If I remember right, this was on he P/S of the trans
Park/Neutral Position Switch
Range Position Switch
VSS

Oil Pressure:
Engine Oil Pressure (EOP) Sensor

Engine Harness to Coils:
Ignition Coils (1,3,5,7 cylinders)
Ignition Coils (2,4,6,8 cylinders)
Ignition Coil 1
Ignition Coil 2
and so on, all 8 listed individually

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Just to give you all an idea of what I am doing for part numbers.

I might go through and note part you will need for sure, and what are optional. Instead of an overall list of what out there, I'm doing something more along the line of a minimum list of what you will want/need to do a swap into a square body, and might tweak it for a 67-72 also.

It's not complete, this is just where I am at right now.

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

The info I have has a few more connectors including the flex fuel injector connectors, trans shift solonoids etc. It is about 2MB if you are interested in it PM me an email address

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

My screenname, plus @aim.com

Thanks!

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Sent, let me know if you recieve it and can open it

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Got 'em, and I can open them. Thanks again!

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Wow, great info. That is even pretty clear to me and we all know that I am not the mechanical genius in the group. :lol: Good job!!

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

very cool! i dont think you can make it any easier Bob... short of traveling state to state and doing the installs yourself:lol:

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Excellent Idea!!!!!!:devil:

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Thats what I was thinking. Come to North Carolina first please. :lol:

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Sweetness Bob!!! :metal:

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

Sweeeet post!! thanks!!! now what to buy first..... :lol:

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

yeah and stop by Ok for a week or two on the way ;)

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

A week or two...isn't that a little excessive for Super Bob? 2 days max on the next one!

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

true :metal:

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

yes bob,, that was one of the evap plug/sensor I was talking about, I am wanted to be sure I could take it off my harnesss,.. but the plug I have no idea if I need is this..hopefully this time the pics will show.. I tried re sizing them but cant

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

also how the do you guys make them pics small... thats like the smallest I can make them?

Re: Glock's new project: "Fred" w/ 5.3L LS swap info
 

those pics are about the perfect size