The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Heavy Haulers (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=239)
-   -   The Ulitmate Craigslist find thread (https://67-72chevytrucks.com/vboard/showthread.php?t=656427)

Wikid61 12-20-2022 08:13 PM

Re: The Ulitmate Craigslist find thread
 
2 Attachment(s)
https://www.facebook.com/marketplace...8-4864d524f62c 1963 Chevrolet dump truck
$1,500
Listed 4 weeks ago in Billings, MT

Wikid61 12-20-2022 09:09 PM

Re: The Ulitmate Craigslist find thread
 
3 Attachment(s)
https://www.facebook.com/marketplace...f-407cbce7560a 671 Detroit diesel
5 speed transmission 3 speed axel
Title
Dual tandem axel
Been sitting awhile so doesn't run 1970 Chevrolet c70 series
$2,000
Listed 9 weeks ago in Mead, WA

Wikid61 12-21-2022 12:11 AM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
https://www.facebook.com/marketplace...5-87cb3636adb4

C10 - C90 Bill 12-21-2022 12:37 AM

Re: The Ulitmate Craigslist find thread
 
I was hoping that you would start posting some heavies, lol.

The red truck is actually a Chevy 90. Owner is stating "3-Speed Rear", but it's actually a 13-Speed Road Ranger. Nice sheet metal to boot. Wish it was closer.

Black truck looks like a 7500 and has a 6V-71.

Wikid61 12-21-2022 02:48 AM

Re: The Ulitmate Craigslist find thread
 
2 Attachment(s)
https://www.facebook.com/marketplace...6-1922b1eca9f8 1960 Chevrolet silverado
$1,600
Listed 5 days ago in Bremen, GA

67km1590 12-22-2022 09:51 AM

Re: The Ulitmate Craigslist find thread
 
It is possible that C90 does have Eaton three speed rear axles. Not the best set up, you start out with both axles in low, then second speed one was in low and one shifted to high, and third speed both were in high. I always though that set up would be hard on the power divider. Can't tell for sure as the shift knob was similar to the 13 speed.

C10 - C90 Bill 12-22-2022 10:11 AM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by 67km1590 (Post 9158763)
It is possible that C90 does have Eaton three speed rear axles. Not the best set up, you start out with both axles in low, then second speed one was in low and one shifted to high, and third speed both were in high. I always though that set up would be hard on the power divider. Can't tell for sure as the shift knob was similar to the 13 speed.

I could be wrong as it is possible. I've never actually seen a 3-Speed Rear Axle Knob. I just took it as advertiser error. He didn't even get the truck series correct.

67km1590 12-22-2022 10:38 AM

Re: The Ulitmate Craigslist find thread
 
I can't say for sure either without seeing the top of the knob or the axles but it's a neat truck especially with a 13 speed. 13 speeds and Detroits really worked well together so likely it is a 13 speed. I only remember seeing two trucks with the three speed set up, both were Internationals with 549 gas engines.

CarolinaHD 12-22-2022 04:04 PM

Re: The Ulitmate Craigslist find thread
 
If that 90 series wasn't in Washington state then I would already have it.

Anyone out there deliver to the east coast?:hm:

C10 - C90 Bill 12-22-2022 05:27 PM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by CarolinaHD (Post 9158875)
If that 90 series wasn't in Washington state then I would already have it.

Anyone out there deliver to the east coast?:hm:

I agree, except if it really has a 3-Speed Rear. I need a Road Ranger, lol.

factorystock 12-22-2022 09:08 PM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
Quote:

Originally Posted by C10 - C90 Bill (Post 9158771)
I could be wrong as it is possible. I've never actually seen a 3-Speed Rear Axle Knob. I just took it as advertiser error. He didn't even get the truck series correct.

Here is the top part of the knob on ebay. Bottom part of knob ( not shown) would have the selector switch.

Wikid61 12-22-2022 10:39 PM

Re: The Ulitmate Craigslist find thread
 
3 Attachment(s)
https://www.facebook.com/marketplace...c-d5717dfecdf1 1960 GMC 7500
$3,800
Listed 9 weeks ago in Braselton, GA

Wikid61 12-22-2022 11:00 PM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
https://www.facebook.com/marketplace...1-3c24fe097238

Wikid61 12-22-2022 11:56 PM

Re: The Ulitmate Craigslist find thread
 
2 Attachment(s)
1958 Chevrolet silverado 3500 Work Truck Cab & Chassis 4D
$8,500
Listed 5 weeks ago in Las Vegas, NV https://www.facebook.com/marketplace...9-2b00533eca23

Wikid61 12-23-2022 12:06 AM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
https://www.facebook.com/marketplace...a-1ec76312be4b

C10 - C90 Bill 12-23-2022 12:27 AM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by factorystock (Post 9158937)
Here is the top part of the knob on ebay. Bottom part of knob ( not shown) would have the selector switch.

Great picture.

C10 - C90 Bill 12-23-2022 12:31 AM

Re: The Ulitmate Craigslist find thread
 
The GMC 7500 above is either a '66 or '67.

Would make a great Rollback.

Under CDL to boot.

Bob B. 12-23-2022 02:42 AM

Re: The Ulitmate Craigslist find thread
 
Quote:

Originally Posted by factorystock (Post 9158937)
Here is the top part of the knob on ebay. Bottom part of knob ( not shown) would have the selector switch.

Yes indeed, they did exist! What it was was an Eaton tandem set with 2, 2 speed axles and an inter-axle differential power divider. 'Low' was both axles in low range, 'High' was both axles in high range. In the intermediate range one axle was in 'low', the other 'high', and the difference in ratios was split by the differential. 67km1590 was right, it supposedly didn't like running in the intermediate range. Don't think you could lock out the power divider for obvious reasons! Whole point of the idea was to allow a use of a simple 5 speed transmission instead of a Road Ranger, ect., which this truck apparently has.

Wikid61 12-23-2022 05:43 AM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
https://spokane.craigslist.org/cto/7571055571.html 1970 Chevrolet Grain Truck for sale!!
This is a great starter grain truck for your operation!!
She’s in fairly good condition with the little quirks that come with age. She runs, she hauls and she’s had an updated paint job

Wikid61 12-23-2022 08:20 PM

Re: The Ulitmate Craigslist find thread
 
2 Attachment(s)
https://www.facebook.com/marketplace...6-282e911a97ce

Wikid61 12-24-2022 05:59 AM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
https://www.facebook.com/marketplace...3-7525f6d691a9

factorystock 12-24-2022 10:28 PM

Re: The Ulitmate Craigslist find thread
 
2 Attachment(s)
Found an ad from the mid 60's.

Wikid61 12-31-2022 12:36 AM

Re: The Ulitmate Craigslist find thread
 
2 Attachment(s)
Chevy C50 Grain Truck
$5,000
Listed 6 hours ago in Sheridan, IN https://www.facebook.com/marketplace...type=top_picks

Wikid61 12-31-2022 12:55 AM

Re: The Ulitmate Craigslist find thread
 
1 Attachment(s)
https://www.facebook.com/marketplace...d-040b79081f00

Wikid61 12-31-2022 01:04 AM

Re: The Ulitmate Craigslist find thread
 
2 Attachment(s)
https://www.facebook.com/marketplace...type=top_picks


All times are GMT -4. The time now is 01:21 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com