|
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
A quick recap for those who join midway and ask questions.
The van came with a small sports steering wheel, it worked, but I was not a fan. Without even asking, advertising or mentioning it as a priority, including when I went to the junk yard in Rogers, Arkansas, a fellow member on AstroSafari.com messaged me and asked if I would be interested in an original wheel in great condition. My instant response was to say yes please and to worry about logistics later. (He works in shipping and PayPal can fix stuff) In the end Tony drove his Mustang a long way from beyond St Louis, Missouri to 45 miles beyond St Louis, in the opposite direction to deliver the wheel, and a load of books and rare service manuals to Dennis’ place before Dennis could even go to meet him halfway (keep in min, shipping would be easy) But that is often what some of us do for each other in this car hobby and other situations. So when I got back from my trip to see Clem in Arkansas and Andy in Oklahoma, there was a pile of gifts laying on the back of the 1966 C10 NASCAR truck. https://hosting.photobucket.com/imag...080&fit=bounds Packed and ready to head to the U.K. https://hosting.photobucket.com/imag...080&fit=bounds Offered up against the smaller one. https://hosting.photobucket.com/imag...080&fit=bounds Of course the job was not going to be easy…… So plan B was devised. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Allen heads all drilled off. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Leaving the centre nut to remove and the boss to pull off. Easy, using a socket. https://hosting.photobucket.com/imag...080&fit=bounds That was not happening. On to the next plan. Create a puller. Metric vs Imperial. https://hosting.photobucket.com/imag...080&fit=bounds Made up a puller, using bits of metal and two bolts with the right thread pattern. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds New steering fitted. And super pleased. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Drove 110 miles to a car show and both on the road and through town it feels really great. https://hosting.photobucket.com/imag...080&fit=bounds VIDEO. https://youtu.be/j29iQnt4Ie8?si=2upEvene58VfU2js . |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
I have pretty much completed the 2023 USA RoadTrip report on Retrorides
Hopefully it is of varying value to readers, After all, threads are more than just pictures, they should be a resource and a place to discuss things. I never know if a basic break down of costs is of any value to anyone else. And more importantly, if it will be the thing that makes someone realise their travel dream, or pee the same person off because they either do not have the resource, drive, ability or will power, or is that wont power to put a trip together. I am very fortunate that my own lifestyle, life philosophy, circles of friends and living what I preach has made these trips possible, along with incredible humans like Dennis, and every other person mentioned, and not mentioned in these blogs and vlogs. So some of my travel is cheaper than you may be able to experience, but most readers will recall, I have had total strangers (the Australian couple touring UK/Europe) stay in my house, McMurphy and Patricia using it as a base, and countless others coming and going through my life. Karma has a way of lining all of these things up and making it into one continuous story. MAYBE I SHOULD MENTION ALSO THAT I TRY TO PICK UP AS MANY TABS AS I CAN, PAYING MY OWN WAY, AND THROUGH MUTUAL RESPECT AND GETTING TO KNOW EACH OTHER OVER THE YEARS, THIS HAS BECOME EASIER, WHERE CLEM, DENNIS AND OTHERS ARE CONCERNED, SO I AM NOT AT ALL ON A SPONSORED HOLIDAY. PLACES LIKE FLORIDA FUN PARKS, DISNEY, ATTRACTIONS AND TOURIST CITIES ETC ADD TO COSTS VERY QUICKLY. I prefer to travel off the beaten track and to get to know the real Americans and their world. So a very basic break down of this trip costs, rounded up or down to the nearest £10.00 will be…… Ticket £660.00 Insurance, International driver license £140.00 Mickey Taxi, drop off, ULEZ, Parking £140.00 Heathrow breakfast £10.00 Boston sandwich £20.00 USA Fuel, Food, Alcohol, Gifts etc £1000.00 So I would say that 22 days including everything I can remember tops out at £2000.00 which means £90.00 per day. Of course that is not really the way to do a calculation but when I do “man maths” and look at the price of a packet of cigarettes at a low average of £10.00 for 20 per day, and a few beers, or a pair of cocktails at a cheap £20.00 per visit, and a kebab and Coke rounded up to £10.00 before you have driven to town, paid up to £10.00 for parking and fuel you get to about: Cigarettes £70.00/week Beers £40.00/two nights Kebab or food £30.00/week Transport £20.00/week EQUALS = £160.00 MONTHLY POTENTIAL = £640.00/month I will immediately say that there are many people, who for various reasons do not spend or have the money to spend in this way, and respect to every person who fight the daily fight to make ends meet. But for those who need a motivation, maybe this shows how easy it is to spend more than you realise. When I went to St Louis to meet Dennis and ultimately the rest of America in 2016 for the first time, I did not want to spend the money as I always tried to thing of tomorrow and the next day. It took a loving woman like Nicola to point out the basics to me, pointing out that Mickey next door smokes and has a few beers every day of his life, as long as he has cash in his pocket. She also reminded me that the richest guy in the grave yard was not a particularly clever title to have, and that corpse shrouds do not come with pockets. I really hope this entry is of value to anyone reading and considering a trip, whether it be to anywhere in America, like my road trips, or a trip to Wales in winter, when prices could be a bit lower, and a nice log fire as inviting as Route 66. Choice is yours. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Washed both the Astro and the S10 yesterday afternoon late.
They get dirty just standing around and if I looked at buying the S10, parked out on the sidewalk, a clean car would sell easier than one covered in a weeks worth of dust and spiders webs. I also spoke to Dennis and he suggested going in gentle with trying to shift the paint on the glovebox lid. Starting with brake cleaner and a coarse rag. https://hosting.photobucket.com/imag...080&fit=bounds The ashtray can be removed and actually is made of black plastic. I am not sure if that is the way they were originally made, and if they then were painted in the factory process to the colour of the “dog box” and other dash pieces, as the one the radio surround came from in Arkansas had brown down there. https://hosting.photobucket.com/imag...080&fit=bounds The glove box can also be removed with three small screws on the hinge, making a possible repaint easier, and not necessitating a huge mask up of the interior. This will also affect my decision making later today, as to what avenue to follow. https://hosting.photobucket.com/imag...080&fit=bounds So I went at the whole thing for some time, using both elbow grease and a fair amount of brake cleaner. The only place where the brake cleaner actually worked was the ashtray. I never felt any change in the consistency of the clear lacquer over the 90’s graffiti at all. Eventually giving up on that. I will take the glovebox lid off some time today and take it to a local (7 miles) paint store and see if they can colour match the plastic on the inside of the lid and then just paint it directly over the clear, as more paint will lose the texture of the plastic, and I do not want to melt down the existing plastic by any aggressive use of strippers etc. Final result was not encouraging. But the ashtray is less grey. https://hosting.photobucket.com/imag...080&fit=bounds Fingers crossed for later. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Being made redundant has its perks {not really)
Asked the boss on Monday at our weekly team, Teams meeting what his expectations were of me, in front of the team. His response: “Do whatever you want, however you feel” I am still working, and going out, but not giving the constant 100% and pushing harder than most of my (still employed) colleagues. That is just how I am. But, if I run out of work to do by 2.00pm…….. I head home. They can’t exactly fire me, can they. So yesterday I managed to stop by a paint specialist to get some satin grey paint colour matched to what was left on the ashtray, which just happened to be in the car with me. Custom filled spray can, the fan on the nozzle is perfect, and the paint overspray on my hand felt really “wet” also dried real fast at 5.00pm https://hosting.photobucket.com/imag...080&fit=bounds A 5 minute job, and I was headed home from these guys in Medway City Industrial Estate. Priced at under £20.00 including tax. Highly recommend. https://hosting.photobucket.com/imag...080&fit=bounds Back home I used a 3M scotch pad, fine-ish grade to completely scuff all the surfaces and grooves to maximise adhesion of the plastic primer (left over from a previous project) as well as really getting the colourful glovebox lid keyed up. https://hosting.photobucket.com/imag...080&fit=bounds Followed by a decent wipe down, then masking, which was a bit of a pain due to previously using one of those plastic polishes on all the interior surfaces. Masking tape does not stick to it at all. Plastic primer. Recommended for use on most paint types. No reactions. https://hosting.photobucket.com/imag...080&fit=bounds Primered. Two coats to ensure I did not miss anywhere, left to dry between coats. https://hosting.photobucket.com/imag...080&fit=bounds Ashtray before cleaning and primer. https://hosting.photobucket.com/imag...080&fit=bounds After two coats of satin grey paint and primer. The texture of the plastic still clearly visible. Really pleased with the result. https://hosting.photobucket.com/imag...080&fit=bounds And of course the glovebox. The whole interior was let down by this outdated art Sometimes you just need to fix stuff. Going from this…… https://hosting.photobucket.com/imag...080&fit=bounds To his finish is a massive change. Again, if you look, the match is great, and it is just so much cleaner. https://hosting.photobucket.com/imag...080&fit=bounds And stepping back. Before. https://hosting.photobucket.com/imag...080&fit=bounds And now. https://hosting.photobucket.com/imag...080&fit=bounds Well, of course a video too for those who like moving pictures. https://youtu.be/p6RydMevyyE?si=4CdEERCIxfbWv5Ar Soon, I will run out of jobs to do for the van. What next? |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
It is obvious that despite no comments, there are people still looking into this thread.
I still have the S10, but it is for sale, to make space for the Van. Thanks to all those commenting on the obvious, Imfeel obliged to fix it. After deleting the 90’s graffiti, it was obvious (was from the start really) that the parts to the left and right, through 33 years of wear and aging, could do with a colour match as well. No idea how the plastics have gone yellow, but maybe GM had different suppliers for different pieces of trim, and as long as the exterior kinda matched….. we all know how often it does not even in new cars, it was fine for the production line. In a commercial vehicle that was expected to do a 300k mile life in a few years, longevity was possibly less important than a “survivor” that after 33 years, still only had done 78k miles. So as soon as I get time to disassemble these two panels, including the switches, buttons that run through them, they will be prepped and painted. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Friday, thank goodness. Headed out to do some training at Woolwich today. Then we can come home to play. Later gang. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
|
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
It's amazing what a little bit of interior plastic paint can do to restore an interior. I am not sure if you have SEM interior paint over there, but they actually have 2 formulas - 1 for hard plastic, and then another for vinyl/soft plastic. I'm sure pretty much any paint company has similar formulas, but I've even used the vinyl "paint" (it's almost more like a dye, I suppose) and results have been great.
It will look really nice once you get those 2 other pieces done. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Quote:
Interestingly, my best friend, Dennis asked me about SEM yesterday, and said the same as you. It is too late now. BUT….. great for future reference. I have painted the next two pieces, report tomorrow, 10.30pm here. The result is good, but of course now other parts look worn. A deep dark, slippery slope this. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Thanks to my own eyes, and multiple comments from others, my Friday afternoon after work was spent addressing these.
https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds So dismantling took a few minutes. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Looking a mess. Loads of spare audio wires and plugs. The radio, speakers and amps are a job for another day…… Need a clever audio type volunteer to come help me understand, identify and remove what can be removed, or re-use and replace what needs to be replaced in order to give me a simple Radio/CD/Bluetooth system, utilising all the speaker holes in doors and rear doors, plus maybe reinstate the two amplifiers in the side wall. ANYONE ? https://hosting.photobucket.com/imag...080&fit=bounds Next job….. PREP, PRIME, PAINT. https://hosting.photobucket.com/imag...080&fit=bounds Done. https://hosting.photobucket.com/imag...080&fit=bounds Much better. https://hosting.photobucket.com/imag...080&fit=bounds BEFORE https://hosting.photobucket.com/imag...080&fit=bounds AFTER. https://hosting.photobucket.com/imag...080&fit=bounds To all the Zoomers…….. keep going. Now there is a difference again, and also, you can see what 33 years have done to distorting the plastics that may have been aligned from the factory. I think there is a time to step away and start drinking. Now is not the time. Later. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
S10 sold this morning.
Just filled the tank for buyer, and fresh MOT getting done this afternoon At 4.30. https://hosting.photobucket.com/imag...080&fit=bounds |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
|
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Looks great. But I think you need to paint the piece above the glovebox now. haha.
|
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Quote:
I have been looking at ways to try blend them…. In all vans of this era, there is a distinct difference in colour it seems. Swapping parking places…… With the S10 sold, to be collected once license plate is swapped etc. Astro now truly has become Number One Child. https://hosting.photobucket.com/imag...080&fit=bounds Van has a lot to prove. https://hosting.photobucket.com/imag...080&fit=bounds And of course. https://hosting.photobucket.com/imag...080&fit=bounds . . |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
So Saturday after the S10 sold, I filled it with fuel, and took it for an MOT.
Sunday I unpacked the two steel cabinets worth of spare parts for It and also the spare GMC parts I have for it. I was amazed at how much stuff I had bought and collected for it over the last three years for it. There are also two boxes already packed with wiring looms, complete ignition sets etc. https://hosting.photobucket.com/imag...080&fit=bounds One of the things I rediscovered was a centre console from a 7.5 Ton refrigerated truck that I bought years ago. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds When driving the van to Margate two weeks ago, I had a cooler bag for stuff, but thought it would be nice to have a bigger glovebox/storage space than the standard one I just removed the 90’s graffiti from. Plan born. I test fitted it on the floor, but also like this, with a plastic stacker box under it. Preferred the raised position to flat on the floor. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds So I washed and cleaned all of it with ammonia based scrubbing soap and a pot scouter, unfortunately the stains on the plastic would not shift. So on to plan B. This included the plastic box, which had a huge crack in the bottom. So the plan was to cut a hole in the side and reinforce it all. https://hosting.photobucket.com/imag...080&fit=bounds Magic stuff, plywood. https://hosting.photobucket.com/imag...080&fit=bounds Screwed and glued together, the next job was to 3M Scotch pad the console, then mask and wipe it all down with thinners. Followed by plastic primer. https://hosting.photobucket.com/imag...080&fit=bounds Step away……. Coffee….. Satin black. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Cup holders and all the leading edges got a few coats of paint as they are high impact areas. https://hosting.photobucket.com/imag...080&fit=bounds And test fitted after paint. Still needs to be secured to the box, and a bit of carpet or fabric added to box floor. https://hosting.photobucket.com/imag...080&fit=bounds And looking in from outside. Really happy with that all. https://hosting.photobucket.com/imag...080&fit=bounds To me, this is a small job with a great outcome. Video https://youtu.be/OF1an8w_82c?si=eTDOscFksmhD-jYz Next job……. Drive the bloody thing a bit. . |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Life goes on at Grizz-Towers.
George has kinda gotten used to me being back home from the USA but still comes in for super cuddles or a bit of time with me, which I enjoy. He is way beyond the level of Gabby the feral at @ivanhoew but still his own,guy. https://hosting.photobucket.com/imag...080&fit=bounds So a few holes, nuts, washers and tightened…… Needs a bit of automotive carpet inside the base box. Job done. https://hosting.photobucket.com/imag...080&fit=bounds Also had some lightweight fun yesterday. I am not planning any more stickers, and the one on the rear door will be removed once I find it unfunny. Bought because it always made me smile The van does not need stickers. This one I got from Tyler in the USA is a bit silly, but will make people do a double take. https://hosting.photobucket.com/imag...080&fit=bounds Deeply placed on the firewall. https://hosting.photobucket.com/imag...080&fit=bounds Struggled with afternoon light to get this pic taken. Flying eyeball from Tyler as well. And Tripp Jones Racing from Dennis is for his grandson who already is being prepped, like son Adam was, for a potential future in racing. https://hosting.photobucket.com/imag...080&fit=bounds And the one that will not stay on for very long…. But I like it. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Late afternoon, mate Kevin came over in his very smart VW camper to visit and also to check out the Astro. Of course I had to take him out for a run. Nervous? https://hosting.photobucket.com/imag...080&fit=bounds Came back, and it seems he approves. He and his wife just came back from three weeks in Oregon and Washington states, which they loved. Next job is to identify all the suspension lubrication points and then to get the van down to,the garage, get it raised up on the ramps or even higher, and grease all the various points. Looking after stuff usually makes it last longer. . |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Seems to me, I am spoiling the readers on here.
Way too much story telling and posting. So it is time for a LUBE JOB I think that when you service a vehicle or machine, you mostly extend its life. So one of the things I wanted to do was clean up and grease all the moving parts with a nipple today. Consulting the GM service manuals I was gifted by Tony, I printed off the one page with all the lubrication points to take to the garage, rather than mess up the manuals. Haynes Manual was an outright failure. https://hosting.photobucket.com/imag...080&fit=bounds All on one one page. https://hosting.photobucket.com/imag...080&fit=bounds So I got going. Swapped around the cars and truck. https://hosting.photobucket.com/imag...080&fit=bounds YouTube content I hear you say. Hopefully a guide. https://hosting.photobucket.com/imag...080&fit=bounds Getting a rise out of this lube job yet? https://hosting.photobucket.com/imag...080&fit=bounds So looking under the front end, the grease points were all a bit dirty and the grease was hardened. When last was this thing lubbed up ? Maintenance ? Errrmmm. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds So I crawled around, cleaned up and lubed up under there. Result. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds So another job done today, in order to get keep this little gem on the road. Video: https://youtu.be/fAmEHBt6IsI?si=tpy8UoPt44J0yzhg So, what do you think? Progress? |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
CLUNK
CLINK CLUNK CLINK CLUNK CLINK ONLY SMALL NOISES. Not currently apparent from the left rear wheel area. So I got an Allen key set and proceeded to remove the centre Line centre caps One by one they came off, nothing in there at all Impressed that the Allen head screws all had copper slip on their threads. Never found anything loose in the end. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Went for a drive. Saw this Mitsubishi L200 shorty. Makes the van look smaller than it is. https://hosting.photobucket.com/imag...080&fit=bounds Still smiling. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Saturday morning I was out earlier than normal, as we had a BBQ invitation to friends an hour from here for 2.00pm.
Lazy jobs to do, so I started with checking out the radio in the Van. Still not able to figure the balance control on this rocket ship,radio. So unable to test the speakers in the rear doors. But I did find this……… Anyone need it? https://hosting.photobucket.com/imag...080&fit=bounds Next up, refitted the rear door retaining strap that @glenanderson had fished out. Two handed job for sure. Fitted though. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds While out back, I did an asses,ent of the threshold, not too nice. So a bit of paint repairing will happen . I also measured the open section and went to order a 5 meter length of 150mm or 6 inch wide, anti-slip tape to put on the edge. Whoever the genius put the bit on there before, clearly never loaded a van. I will apply it o the edge and possibly fold it over the edge a bit. https://hosting.photobucket.com/imag...080&fit=bounds At £9.00 delivered it seems a good investment or added peace of mind in preventative maintenance. https://hosting.photobucket.com/imag...080&fit=bounds While I was on that job, I looked at the second door (opens after the first one) on the left, it is missing a trip strip of some sort Does the van doors come with a protective strip? Or do I have to make one up? Answers please. https://hosting.photobucket.com/imag...080&fit=bounds Then back to the floor…….. The rear retaining g strip for the carpeting has missed a few screws since day one, so I thought removing and replacing them all makes sense. They are screwed through the floor. Some came out easy…… https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Some needed a bit of persuading, and rather than force them, a gentle tape, followed by a more persuasive tap on a Phillips screwdriver made the rust break and then allowed me to get them out. This really does help, as having the head break off meant that replacing the screws with fresh ones would be a ball ache for sure. https://hosting.photobucket.com/imag...080&fit=bounds I had very short replacements , but lucky for me, neighbour Tony at no1 house who does my boiler servicing and electrical maintenance, had some in his garage. Longer than I need, but a swift cut with a grinder will see that sorted. Once I have prepared all the holes with some rust preventative, and cleaned the edge strop, I will refit the strip with new screws. That should make a difference too. https://hosting.photobucket.com/imag...080&fit=bounds At this point, I had to walk away to go shower and shave for the afternoon out. But even small jobs need doing. So a good day again. https://hosting.photobucket.com/imag...080&fit=bounds I need to go shower and then pack a small bag……. Remember Bill who did the logistics for the Rezin Rockit? He called me on Friday, offering to come down from Scotland for a few days to help me with anything random that needs doing here. He is a fireman, so has extended shifts on and off work. Currently dog-sitting, he wanted to bring his dog along, but of course George would not be happy. So I declined his offer of helping me with servicing the Astro, and sorting the sound system out. 450 miles is a long way to drive to randomly help someone (of course he gains time away as a break too) So last night I impulsively called him at 9.30pm and asked if he has a bed for me…….. I have about 10 days vacation time too use before I stop work mid November, and had texted my boss for permission while out at the BBQ. Anyone near Glasgow? Whitchurch, Shropshire? Get the kettle going, send me a PM. https://hosting.photobucket.com/imag...080&fit=bounds Life certainly is good. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Interesting gift from mate Bill.
There you go, if it works, great, if not, bin it. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
My trip up to Scotland has been really enjoyable.
Seen loads of stuff, met some great people. One of Bills long term friends shall we say is a money making machine. Nonstop ideas and cations keeps money pouring in. Last week he drove to Norway to strip down this Volvo truck, bringing back the parts to restore one of 6 that were meant to have been exported to South Africa years ago, that he now owns, three rusted away, one is on the road and one unknown. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds The one he has, note the cab floor, and a birds nest in the roof. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Anyway….. he is the kind of guy who buys a Porsche Taycan new, drives it a few months and parks it up on the drive because it is disappointing in its range and ability as a daily driver, going back to his Mercedes Vito as daily. He owns A load of interesting exotics and collectibles, including a beautiful Datsun 260Z , 911, a few Tombstone Benzes, two G-Wagons and then all sorts of interesting smaller stuff. Moss covered Taycan did not look like this. https://hosting.photobucket.com/imag...080&fit=bounds Various barns, garages and stables filled with all sorts of future projects. Just one of the barns, filled with loads, and there were three early Honda Accors and much more stuff. Nothing for sale here. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds But this had me calling him on Bills phone to just register my interest, if you know what I mean. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Tonight is steak……. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Looks like I have sourced a wheel.
Just need to figure a way to get it from Hereford to Kent. https://hosting.photobucket.com/imag...080&fit=bounds And then get a tyre on it as well. And paint would help. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
While in Scotland, Bill and I took,Blue, his dog for a walk.
Perfect. Also managed to go see the Falkirk Wheel. Wikipedia says: The Falkirk Wheel is a rotating boat lift in Tamfourhill, Falkirk, in central Scotland, connecting the Forth and Clyde Canal with the Union Canal. It reconnects the two canals for the first time since the 1930s. It opened in 2002 as part of the Millennium Link project. The plan to regenerate central Scotland's canals and reconnect Glasgow with Edinburgh was led by British Waterways with support and funding from seven local authorities, the Scottish Enterprise Network, the European Regional Development Fund, and the Millennium Commission. Planners decided early on to create a dramatic 21st-century landmark structure to reconnect the canals, instead of simply recreating the historic lock flight. The wheel raises boats by 24 metres (79 ft), but the Union Canal is still 11 metres (36 ft) higher than the aqueduct which meets the wheel. Boats must also pass through a pair of locks between the top of the wheel and the Union Canal. The Falkirk Wheel is the only rotating boat lift of its kind in the world, and one of two working boat lifts in the United Kingdom, the other being the Anderton Boat Lift. Did a bit of a glued together bit of video of it turning nd lifting a longboat from one canal up to another system. https://youtu.be/1nOVHFwgpL0?si=UnVttmjINJ6IIQFK Time well spent, both for me and the dog. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
S10 truck Collection on Sunday.
Truck now back to its original registration number. Astro issued with GRZ733 So the story continues. Friday 13th and today at 11.00 is my final redundancy “consultation” not sure what part of this is consulting, as it is more a “tell you” It will be interesting to hear what they have to tell me. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
While I was up in Scotland visiting Bill, I managed to scavenge som plastic trim from a Mazda Bongo van he had chopped up.
https://hosting.photobucket.com/imag...080&fit=bounds Door lock and side needs trim. This may be a plan. https://hosting.photobucket.com/imag...080&fit=bounds https://hosting.photobucket.com/imag...080&fit=bounds Not quite a perfect fit, but a grinder, some heat gun action and we may have it looking a lot better. https://hosting.photobucket.com/imag...080&fit=bounds During the week, while I travelled to Scotland, some anti-slip tape arrived at home. So I removed the half-arsed attempt by some brain surgeon, leaned up many years worth of old hardened glue and proceeded to measure and cut. https://hosting.photobucket.com/imag...080&fit=bounds Pretty messy and messed up. https://hosting.photobucket.com/imag...080&fit=bounds Cut to length https://hosting.photobucket.com/imag...080&fit=bounds Cut to shape. https://hosting.photobucket.com/imag...080&fit=bounds Up close. Liking that a lot. https://hosting.photobucket.com/imag...080&fit=bounds Cleaned up the removable tow bar and removed the original license plate. https://hosting.photobucket.com/imag...080&fit=bounds Fitted, with license plate in place. Not ideal https://hosting.photobucket.com/imag...080&fit=bounds And replaced the front license plate. I am liking this. https://hosting.photobucket.com/imag...080&fit=bounds Next job is to drill the holes for the retaining stip, carefully, in order to get the screws back in to hold the strip down. Fit the rear license plate, as I had to clean up and repaint the rear plate support. |
Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck
Raining all day.
Working redundancy style……. They can’t really fire me now, can they. Wanted to get some rear entry action in today. Cut, shape and see if it works to make up a blanking panel for the rear door. The number plate recess has been tidied and the paint now dried, but rain prevents fitting. https://hosting.photobucket.com/imag...080&fit=bounds Hoped some time over the weekend to get some stuff done. |
| All times are GMT -4. The time now is 02:35 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com