The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1960 - 1966 Chevrolet & GMC Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=6)
-   -   Post Your 60-63 Body Style Chevy/GMC Trucks (https://67-72chevytrucks.com/vboard/showthread.php?t=281870)

1Bad62Pro/Street 05-15-2009 04:13 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
7.580 @ 89.7 - 1/8 mile is not bad!
How do ya have her set up?
Enigine/Tranny
Front end/Rear End
10.5 Slicks?
Etc.

Bears63 05-15-2009 05:30 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
Here's a couple pics of my '63 C20:

http://i21.photobucket.com/albums/b2.../Sept30004.jpg
http://i21.photobucket.com/albums/b2...0/Oct20012.jpg

Super73 05-16-2009 04:41 AM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
Well its got:

347ci LS1
Forged roatating assembley
Ported factory heads
243/250 @ .050 cam
Thise passes had an LS6 intake with a factory smoothed and ported TB
Had a factory mechanical water pump
Underdrive crank pulley
Manual steering box
Power brakes

4L80E trans
4,900rpm converter
3.73
30" x 14.50 ET Street (going through the traps in second gear with the converter locked aprox 7,100rpm)

Being all steel, the truck weighed in a 3,840 with me in the seat and 1/2 tank of gas.

The front suspension is stock minus the springs and shocks. According to Moroso, I was running a spring that would not work for the weight of my truck. But, according to the leverage ratio and my unsprung weight, I found it to be ummm, perfect :) Shocks were a Comp Engineering 3-way, but even on the 70/30 setting, there was still a little too much stored energy in the front. I have switched to a Rancho 9,000x.

The rear again is stock other than an adjustable lower control arm braket I made that allows you to move the mounting location, I think there are 5 holes. Also a Classic performance lowering spring, blocks and again a Comp 3-way shock.

Since that outing I have:

Switched to a single plain with a dominator throttle body
Removed the factory bench seat for a set of light weight buckets (50lbs)
Build a new front crossmember that retains the factory control arms (25lbs, but the intake/N20 plate and TB made up the difference)
Cutting off the 30-40lb tow hith I once welded on it
Putting a factory weight tailgate on it (had an extrat junk gate so I added about 100lbs to it)
Just received a 1 piece glass front end (75 lbs vs te 240 the factory stuff weighs)
Put a 4.56 gear in it
Put an electric water pump on it
Pray every night it goes 11.40-11.50 NA in the 1/4 and low 10's on the jug...

Chuck78 05-16-2009 09:49 AM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
sounds awesome, I'm very impressed - wish I had some LS1's for my 63 panel and my 71 Camaro...

1Bad62Pro/Street 05-17-2009 02:36 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
Same here. Kinda glad I have a that 1970 LS9 350ci/355 vette motor in my ole' 62 truck. The block and heads are Nostalgia and kinda rare now.

SPECS:
BLOCK
Casting #
(1969-79)
3970010
350
4 Bolt Main
Vette
370 HP

HEADS
Casting #
3927186
302/327/350
Intake
2.02
Exaust
1.6

1Bad62Pro/Street 06-05-2009 11:15 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
Heck Yeah!
:burnout:ROAST THE TIRES SLAP OFF!:burnout:
POST'EM IF YA ROAST'EM FELLAS!!!!!


Super73 06-06-2009 12:37 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
Something like this? This is my old truck.. Well, half of it any way.. Kept the 63 frame which is what y sheetmetal is riding on right now.

http://73-ls1.com/63truck/burnouts/yellowburnout001.jpg


http://73-ls1.com/63truck/burnouts/yellowburnout002.jpg


http://73-ls1.com/63truck/burnouts/yellowburnout003.jpg


http://73-ls1.com/63truck/burnouts/yellowburnout004.jpg



Tires were a litle old and I had a set of BFG drag radials on the way..

TwoFiftyShifter 06-06-2009 01:09 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
You always gotta get 'em hot once more before they come off!

1Bad62Pro/Street 06-06-2009 01:36 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
Super73......................
http://www.wediditforlove.com/images/Bill-Tidwell-2.jpg
THAT'S WHAT I'M TALKING ABOUT!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
YOU HAVE GOT IT IN YOUR VEINS TOO.................................................
WE THINK ALIKE!!!!!!!!!!!!

http://i17.photobucket.com/albums/b9...BurnOut_GS.jpg
http://www.dragracingonline.com/pmac.../HS_Garner.jpg
http://www.marshu.com/images-website...tand-kenny.jpg

1Bad62Pro/Street 06-06-2009 01:39 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
Delete

scotts62 06-06-2009 06:24 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
:lol: i bet that landing hurt just a bit and not just the truck..

61chev1tondually 06-06-2009 07:03 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
3 Attachment(s)
i have three old chevs and gmcs. i have a wrecked gmc shortbox(62),a orange stepside shortbox(63) and a blue 1 ton dually chev (61) heres some pics of the blue one and orange one(ill have pics of the dually soon!)

61chev1tondually 06-06-2009 07:11 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
these trucks are like the best old trucks from the sixties
:gmc2:

63sbssbbw 06-06-2009 11:21 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
Welcome 61,from the other side
Cool stuff
What are your plans for them all?
I heard that you may have gotten some snow today!!
T

1Bad62Pro/Street 06-07-2009 03:07 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
Quote:

Originally Posted by scotts62 (Post 3346411)
:lol: i bet that landing hurt just a bit and not just the truck..

Oh yea.......
Maybe tore a new one......ha ha
I'd do it for $20,000 green stamps!!!!!!!!!!!!!
Lord willing I hope to take my dad here the next The Playground of Power.........Father and Son "ON THE BACK BUMPER" Bonding!!!!!!
OCTOBER-Sat 3rd- 2009 World Power Wheel Standing Championships
Check this out:
http://www.outlawracing.com/MESSAGEF...c/Default.aspx
World Power Wheelstanding Championships - $20,000 To Win!
Byron Dragway http://www.byrondragway.com/Home.html is a 1/4 mile dragstrip located in Byron, IL, about 1.5 hours from Chicago. It was originally opened in the 1960s. It was most known for running cars 4 at a time in the past, but this practice has been discontinued. For that reason, Byron is a comparatively wide track. It is currently best know for the World Power Wheel Standing
http://www.byrondragway.com/2009_Byr...y_Schedule.pdf
http://image.carcraft.com/f/9351116/...lstand.JPG.jpg
http://image.carcraft.com/f/9351131/...emlin+land.jpg
http://image.automotive.com/f/eventc..._z+_+photo.jpg
http://image.automotive.com/f/eventc..._z+_+photo.jpg

Super73 06-07-2009 03:12 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
The problem I have with that is you are not garuanteed the coin. I have a lot of money in my junk even though it still looks like junk, I'd hate to have to buy things a second time around. Cool to watch though..

scotts62 06-07-2009 03:18 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
Yeah its more fun to watch someone else tear their stuff up :lol:

1Bad62Pro/Street 06-07-2009 03:58 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
I hear ya buds...........
If had more money than since I'd do it........
I just have a few cents..
http://www.mises.org/images4/TwoCents.png
So I'll just have fun watching those fellas tuck and roll!!!!!!!!!!!!!!!!!!!!!
Like the Duke Boys always said, "Keep her between the ditches!"
http://www.toontracker.com/spinoff/dukes.jpg

61chev1tondually 06-07-2009 10:07 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
hey 63 thanks for the welcome. the blue one i am looking 4 another shortbox chassis (i found one but the guy aint ready to give it up just yet) so it sitting around, and the orange one is my aunties. i plan to hope fully get the blue one done before i graduate from school nxt yr, so i can use it for grad. haha
:blz2:

1Bad62Pro/Street 06-08-2009 05:24 AM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
:chevy:Keep the Pictures coming guys!:chevy:
Keep us updated of your progress...........

http://imcdb.org/images/201/777.jpg

GruntMoanCough 06-08-2009 03:00 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
1 Attachment(s)
Hi RMH :hi2:
Quote:

Originally Posted by 63sbssbbw (Post 3346785)
I heard that you may have gotten some snow today!!
T

Still waitin' for the snow to melt here..................:haha:

scotts62 06-08-2009 07:43 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
^^ Yeah that sucks.. :lol:

65GMCShortStep 06-08-2009 11:15 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
3 Attachment(s)
New here, just bought the truck last Wednesday, haven't really had a chance to do anything yet but here we go.

61chev1tondually 06-09-2009 10:56 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
hi BC how r ya? all the snow left here 3 days ago(yay!) good luck on your project truck too dude. hope the snow melts soon 4 ya

bobjob 06-10-2009 12:30 PM

Re: Post Your 60-63 Body Style Chevy/GMC Trucks
 
looks like someone forgot there wheelie bars.. a lot of money to end up on your back like a turtle...


All times are GMT -4. The time now is 08:40 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com