| Jerry Jones |
07-17-2012 09:04 PM |
Re: Parting out '85 Sierra Classic 1500 4X4
1 Attachment(s)
Quote:
Originally Posted by 5bassman
(Post 5485728)
Sorry, been out of the country for the last two weeks. Just need the three a/c vent pieces shown in the middle, not the ac tube or right side tube. I believe someone else was asking about the tube. What shape are the vents in?
Posted via Mobile Device
|
the vents look good, but 2 of them have a fin that is broken in the back so all of the fins don't move together.
Quote:
Originally Posted by 5bassman
(Post 5485730)
Does the tube on the right have the vent in it?
Posted via Mobile Device
|
It does not have the vent in it, the vent from it is one of the vents mentioned above.
Quote:
Originally Posted by ChaseDale3and8
(Post 5486822)
I'm pleased with it! I'm also wanting a really good set of cab mount bolts/washers. Mine are shot. Got my radiator support out right now as I'm doing an engine swap. When I unbolted the radiator support to frame bolts the washers underneath completely disintegrated! They were the worst rusted parts that I've seen so far on this truck! I took a look at the other 4 bolts/washers and they aren't in very good shape either. How good are the ones on this truck?
Also looking for a bracket for the A/C. Want the one that bolts to the exhaust manifold. I want to keep my original just in case I want to do a original restoration on it some day, but since my new small block is going to have headers, and I want to keep the A/C compressor intact, I need one that I don't mind cutting on to make it fit around the headers. Let me know what ya got. Thanks! ...Joe
|
I would think that the bolts would be in good shape, I have not run into any hardware issues with this truck (so far). I can check this out this weekend if not before.
Quote:
Originally Posted by fanmanj
(Post 5487611)
A/C coompressor any good?
Posted via Mobile Device
|
A/C was in great working order before I started taking thing apart.
Quote:
Originally Posted by countryguy
(Post 5489191)
Does it happen to have a bolt in tranny hump/tunnel?
|
I am not sure I can check this out this weekend if not before.
Quote:
Originally Posted by Dusty4x4
(Post 5489507)
Is the driver side floor support any good?
|
I have not been under the truck yet, I will try to check that out this weekend if not before.
Quote:
Originally Posted by superwade57
(Post 5490011)
im looking for the rubber wedge and bolt that holds the battery in place can you help?
|
I got a set in nice shape, $8.50 shipped? |
