Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Too *****in'.

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Super happy with the seat!! Looks stock just way COOLER!! I also modified the seat brackets to lower the seat.

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Pics.

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

This truck just keeps getting better!

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Update . Couple loose ends all buttoned up. Replaces float in new gas gauge sending unit (gas gauge works again), replaced Turn signal switch ( horn would not stop found the problem, seat belts installed.

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Out for a short drive.

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

I see what you did there ��

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Finally got a good picture of the silver/grey wheel color this morn when the sun was low.

Out and about this morn. Met a friend for breakfast and made a hardware store run. Then later I was haulin some parts.
Posted via Mobile Device

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Love it! Keep the pictures coming

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Old truck looks like it's happy to be back in the game!

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Nice project! I like the direction that you went!

Updates.
Removed the mismatched rocker arms . Some were roller some were not. 11 of 16 were. Truck is much quieter now! Also got the exhaust redone from the headers back used some turbo mufflers has a little rumble happy with sound!
Posted via Mobile Device

More exhaust pics.
Posted via Mobile Device

Also installed a factory radio. This truck has no antenna or speaker holes! The radio is not wired in it is just for looks! So nice to fill the void in the dash!
Posted via Mobile Device

Took the truck for a cruise to drop some parts off at a buddies house. This truck runs GREAT!!
Posted via Mobile Device

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Nothing wrong with a stamped rocker!
The guy that came up with the idea of the stamped rocker arm was a Pontiac engineer. I think someone told him,it couldn’t be done, so he made the first few in the basement of his house.

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Still curious what size tires you are running front and rear ... thanks.

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Curious if you have a drone at idle with the new exhaust?

Nope just barely a rumble. Turbo mufflers only have a couple hours on them currently. Truck is very quiet inside easy to talk at speed. No flowmaster or glass pack …..WAAHHHAAAAAAA
Posted via Mobile Device

Last Caress!!
Posted via Mobile Device

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

Post 65
Rear looks like P265/70R15

Guessing fronts to be P215/70R15’s

Good job on rears. I knew you could figure it out. Fronts are 215 75 15’s
Posted via Mobile Device

Couple fresh pics.
Posted via Mobile Device

Re: My 1968 C-20 vermillion metallic...1 in a VERmillion
 

I don’t get tired of these pics, what a looker