Re: Project 67 C-10
 

well ill be waiting for the pics !

Re: Project 67 C-10
 

Spent 2 hours shoveling off the shed that caved in on my boat. bad day.

Re: Project 67 C-10
 

wow are you okay???

Re: Project 67 C-10
 

I'm good. Shed a little screwed up. no big deal just one of those pepboys 10x20 specials. did make it through 3 winters.

Re: Project 67 C-10
 

thats what my bed looks like! just some card board and a piece of wood!

Re: Project 67 C-10
 

Will be updating tomorrow with pics been working more on it lately. Decided i'd keep my time on at least something i could have an outlook on.

Re: Project 67 C-10
 

Good to hear you have more updates. We have been very patient and have not harrassed you about it at all......but now we will.:lol:

Re: Project 67 C-10
 

haha yes now the 'harrasing will start :devil:

Re: Project 67 C-10
 

Wo wo wo now just wait a minute guys. LOL. :lol:

Also went to the Bruins vs. Canadiens game back in February. Best game i've ever been to. 182 penalty minutes and even a golie fight well kinda.

So here you go. I've been spending to much time nit picking at things but have finally come tp the realization that these were trucks from the 60's and were meant to be trucks, not show pieces. So anyways got the bedsides all stripped and found out the mig gas tanks ere filled again and started filling in the bedsides. Post holes and front and rear caps on the rails. Also cut the latches off and filled in. Not to bad for self taught fabber.

Re: Project 67 C-10
 

also stripped the cab corners and back down so i could see if i'd find any gremlins under the skimcoating. from what i can tell it loks like any body work on the cab was originally done pretty good so not really worrying about it. I'll try to make Mondays my laundry/ update night LOL.

Re: Project 67 C-10
 

nice looking work

Re: Project 67 C-10
 

beautiful work! thos is gonna be a one of a kind truck not many 67s wer A/C and big window but at the same time a c/10 and a stepper!

Re: Project 67 C-10
 

Thanks Guys. Beds not original to the truck believe it was a fleetside cause someone along the line welded the lower trim holes up at some point. I like the fleets better but the bed was in good shape and to find another one up here well i could drive down south and buy a complete truck for what we get up here.

Re: Project 67 C-10
 

well if you ever find a short fleet 67 in good shape (i know it was even had for me to find one) then put it on make it original

Re: Project 67 C-10
 

Now that's an update!!! Those bedsides look great, awesome skillz!

Re: Project 67 C-10
 

Somewhat reassembled the bed on the truck. thinking i'm gonna sandblast the rear cross sill and use that. repop one i got with the truck doesn't seem to fit all that great. Just not sure what to do with where the latches went through. it's where its doble wall and i matched one piece for now but if it were to make it double its nearly impossible to grind the weld down.

Re: Project 67 C-10
 

looks awsome!!!!! i like it! going to flowe and be real smooth when our done

Re: Project 67 C-10
 

Thanks. Think i'm gonna put in another piece on the outside to make it full double wall. Just gona be a matter of cleaning up the weld.

Next big question. Roll Pan which i have or Bumper which I have but need brackets.

Re: Project 67 C-10
 

Re: Project 67 C-10
 

^^^ X2:metal:

Re: Project 67 C-10
 

Then bumper it will be. LOL.
Worked on cutting the latches off the tailgate tonight. Then couldn't manage to find the trunions anywhere hence the clamps holding up the tailgate. Also the tailgates definately original. Originally eat up. So need to work on straightening it out again but think it should look half way decent when done. Need to come up with a small check strip hidden to just hold the tailgate straight when fillling the gas tank.Thinking i can weld a stud inside the lip and relieve the back edge of the tailgate and have a thin stainless coated wire loop. We shall see. Also should be starting on lineing up the front panels this weekend.

Re: Project 67 C-10
 

i wish my hood would align that well!

Re: Project 67 C-10
 

Picture doesn't do it justice. Its actually pretty bad the hood sits alot higher than the fender gap itself aint bad.

Re: Project 67 C-10
 

you think your is bad? my hood looks like it wasnt made for my truck!!!!

Re: Project 67 C-10
 

Well plenty done today. finished up the bed sides and stripped down the tailgate. found way too many issues, but looking little better now. so many dents. Hopeing to get them squared away tomorrow.