Re: project: FTD
 

nylon brush to knock off all the crap.. some chem b12 and steel wook to remove the tarnish..
that's abou tit.. oh and rags of course hehehe

Re: project: FTD
 

SWEET ive been running numbers that i have been finding and here's what i have "total" into my engine as of now..
im waiting on a guesstimate for HP.. hehehehe

electric fan and factory alt and PS are and will be attached..


block
350 bored .060 over
gm 5.7l
the number next to it is 14010207
next to that is a stamp says M27
side of the block states 207
front id states V0901ZBA
105122952

Federal Mogul 350 cast pistons .060 over

crank is
3932442 3.48 69-85 2.45/2.10 cast large journal

heads are casting number 462624
76-87 1.94/1.50
& 2.02/1.60 76 CC Chambers

cam
RENEGADE PN 158881
dur@.050 Int 234 exh 244
vaulve lift int .488 exh .510


intake edlebrock perfromer RPM highsise
spacerplate (1in)
carb holley 670 carb with factory jetting..
(i might have to jet it up.. not sure yet..)

and "nothing special" for the distributor just a stock hei
(not sure because i diddnt buy it..)

Re: project: FTD
 

about 320 hp and 375 tq
this is with 9 to 1 compression
and a 4000 pound truck using camquest

Re: project: FTD
 

annd... well those sounnddd good to me!
hahahhaa...
others say different.. i prey yours is right.. because it sure as hell dont feel like 250 hp...

Re: project: FTD
 

this is not the greatest desktop dyno but it seems pretty acurate
i hope mine is going to be at 430hp/430tq after the head swap

Re: project: FTD
 

You're showing 2 different valve sizes. Are your intake valves 1.94 or 2.02?

That 76cc head is your biggest setback right now. You gonna look for some with smaller combustion chambers? If you could find a set with 64-67cc chambers and 2.02 intake valves you'll be in good shape.

Re: project: FTD
 

the heads unfortunately right now are obviously a major setback, bu tthey are past my allowance to get.. damn....
nut in the near future... it will come.. right now... i want them really really dang bad..
but oh well..

Re: project: FTD
 

i wonder how accurate the comp cams camquest is

Re: project: FTD
 

hey all well! i got the heads town down.. they are actually in reallllly dang good shape! (to bad im gonna replace them soon)
i finished all my welding and "fender extensions" up..
it could have definatley come out alot better but im inot gonna complain seeing how it's my first attempt at this...

so inner and the main fenders done, all i need now is to get off me arse and sandblast the hood and the rad support, headers and battery tray...
paint them up.. and then it'll be time to spray gloss coat on everything....
motor is ready valve r assembly once the RIGHT freaking valve seals come in..
and im set.. time to take pictures i guess

Re: project: FTD
 

cool did you get that program working i think it works great

Re: project: FTD
 

ok so her's the pictures....
im waiting on gloss cote in the next few days to seal in the paint etc.. etc.. to make it alllll pretty...
http://i295.photobucket.com/albums/m...k/DSC01086.jpg

http://i295.photobucket.com/albums/m...k/DSC01089.jpg



in addition to what is seen i also have new timing tape/ clutch(on order) all gaskets needed.. and well.. oil etc...
whenever the gloss gets sprayed i'll be ready and waiting to put the body back together.... so i can finish sliding in the motor and be reeeady to go....

also got a new shock bolt mount for my front axle.. the old one was MIA for quite some time now...

hopefully.. three weeks.. we'll be good to go... and i'll be ready fo break in!

Re: project: FTD
 

http://i295.photobucket.com/albums/m...k/DSC01090.jpg


and a new LINK to see my photos's ive rpeviously posted.. (due to photobucket being dorks!)

http://s295.photobucket.com/albums/m...itchell/truck/

Re: project: FTD
 

cool i cant wait to see it on the road
is this a longbed

Re: project: FTD
 

yeap!
hey gage you want a cam? im seding it tothe swhot this week to find out which one it is.. it's not crazy, but it's nto stock....
waiting to find out what it is..

Re: project: FTD
 

what are the numbers on it

Re: project: FTD
 

wooot wooot! ordered my poly body bushings wheee!
http://www.lmctruck.com/icatalog/cc/full.aspx?Page=53
now.. with the cab sittign at the correct angle (instead of metal on metal rad support, while rear of cab is on new bushings) and my motor is seated correctly! on the CORRECT engine mounts
my distro will FINALLY be able to be adjusted without a whole lot of complaiing!

Re: project: FTD
 

Man we need to get a filter for you bro. Sometimes you type things out so fast that it takes me a minute to figure out what you're trying to say :uhmk:

Nice work on the truck so far. Keeping my eye on the build process.

Re: project: FTD
 

i talk like i think.. and i type like i talk..
yes i should Slllooooowwww down.. but it's a terrible habit left over from the army.. it's kinda lie army induced ADD...
it sucks! hahahha

Re: project: FTD
 

i had o do this....
was doing body mounts..
one bolt snapped off.. (and yes i used PB blaster.. my usual soaking regiem etc...)
then i welded a socket onto the remaining shaft of the bolt..
bolt broke so far in that i couldnt save it..
so.. after heating etc.. it's just impossible..
so...
i did this... now that ive calmed down im going to wait til tomorrow morning before i start welding it all back together
http://i295.photobucket.com/albums/m...k/DSC01097.jpg

http://i295.photobucket.com/albums/m...k/DSC01098.jpg

http://i295.photobucket.com/albums/m...k/DSC01099.jpg

Re: project: FTD
 

man that sucks ive been getting pretty pissed when doing my suspension
my dad always says jokingly sit down drink a beer and smoke a cigarette (in your case cigar)

Re: project: FTD
 

well weather her tonight sucked.. (hot and we had alot of power outages..)
and so i moved my heads into the living room to make em pretty and complete...
and then my awesome wife wanted to leart what in the world i was doing =-)
http://i295.photobucket.com/albums/m...k/DSC01100.jpg
http://i295.photobucket.com/albums/m...k/DSC01101.jpg
http://i295.photobucket.com/albums/m...s/DSC01102.jpg

Re: project: FTD
 

Weather here has been burning my skin plum off. We had like 5 consecutive days of 100+ and they just keep coming.

Re: project: FTD
 

now that is a good wife. I wish mine was into cars or at least interested.

Re: project: FTD
 

it took begging =-) she dosent like to be ignored sooooo.. that was her onlly way of getting attention that night was to help =-)
but HEY it's worth it!
hehehhe

Re: project: FTD
 

nothing done this weekend.. to much family stuff going on.. it'll be tuesday until i can even begin decam install... bummer