The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   67-72 Chevrolet & GMC Pickups Projects and Builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=115)
-   -   ** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. (https://67-72chevytrucks.com/vboard/showthread.php?t=426382)

drewskiren 11-07-2010 07:47 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
3 Attachment(s)
Bottoms of these doors were swiss cheese, so I didn't feel bad stealing the window frames. The Blue and white cab that they came off of was also totally gone on the bottom. Someone had repaired it with newspapers stuffed in the rockers with bondo liberally spread on top. Really nice, long lasting repair. The fun part was the small fire when the plasma cutter hit the newspaper layer. It was very helpful when I was cold that day. At least I could use the newspapers to date the repair, Oct 7, 1992.
Onto trying to weld air on the drivers rear window channel, yeah that's not gonna work. I had to cut and weld in the eighth that I was short. Wasting time, but it worked fine.

swamp rat 11-07-2010 10:25 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
Quote:

Originally Posted by drewskiren (Post 4282753)
Remember the 100 dollar cabs I got? Well they came with doors too which I need to steal something off of. Measured 3 or 4 times on the drivers side only to cut it an eighth inch too short. DOH!!! Some surgeon I am. Passenger side I drilled out the spot welds and removed a good bit into the door. I'll just plug weld the holes at the bottom and butt weld at the top frame.

Don't ya just hate it when ya cut on the wrong side of the line!! :)

drewskiren 11-18-2010 12:14 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
4 Attachment(s)
Green truck is now donating more sheet metal to the patient on the operating table. I'll be getting rid of my old inefficient heat and air system in favor of a new one, so a new firewall is in order.

drewskiren 11-18-2010 12:23 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
5 Attachment(s)
Here is another opportunity for a solution. The burb roofline has a very slight pinch waist as it continues to the rear, a truck does not. So I encountered a little problem of the drip rails not meeting up just right. I decided the best way to attack this issue would be simply to slice off the drip edge, weld in a tiny strip of metal, and grind it all smooth. The drip rail gets a liquid caulk on top which also helps cover up where I welded the roof back down.

drewskiren 11-18-2010 12:25 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
3 Attachment(s)
Semi finished on this side.

Jmac0585 11-18-2010 10:29 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
You... you are very good.

67cheby 11-18-2010 10:32 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
nice work on the drip rail !!

68 TT 11-18-2010 12:01 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
Nice solution to the problem. Keep up the great work.

Dieselwrencher 11-18-2010 05:31 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
Nice progress!

VA72C10 11-18-2010 08:28 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
Nice work! Keep up the good progress!

mcbassin 11-18-2010 11:37 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
This is an Awesome project! It's going to be super cool when done. subscribed.

steppside69 11-19-2010 08:03 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
Looking good, Keep it up Eric

drewskiren 11-19-2010 09:52 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
5 Attachment(s)
Quote:

Originally Posted by steppside69 (Post 4303687)
Looking good, Keep it up Eric

OK Eric, I'm keeping it up!

drewskiren 11-19-2010 09:54 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
5 Attachment(s)
I'm growing tired of all my posts being so YELLOW.

drewskiren 11-19-2010 09:55 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
1 Attachment(s)
I really like this shot of the new and improved drip rail.Attachment 658241

drewskiren 11-19-2010 10:01 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
3 Attachment(s)
More self etching primer. My goal was to be ready for block and prime before the summer began. I am almost current on my posts with where I actually am now. Yes, I have been leading a few of you on.

Dieselwrencher 11-19-2010 10:06 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
Very nice! Man, you are going to force me to sell my standard cab and drive to Wyoming. :lol:

swamp rat 11-19-2010 11:05 PM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
Tell me more about the blue stuff in the drip rail (also looks like its on the front passenger side below the window) is it seam sealer or some kind of special drip rail filler? Thanks! The roof has made some real progress too, when i first saw the pick showing the different slopes i was about mortafide.. over my head..

drewskiren 11-20-2010 01:51 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
Quote:

Originally Posted by swamp rat (Post 4303981)
Tell me more about the blue stuff in the drip rail (also looks like its on the front passenger side below the window) is it seam sealer or some kind of special drip rail filler? Thanks! The roof has made some real progress too, when i first saw the pick showing the different slopes i was about mortified.. over my head..

The Blue stuff is MONEY!
It's almost like cheating.
It is Eastwood 2K self leveling seam sealer.
A 2 part epoxy that self mixes in the caulk nozzle. It comes out as a liquid, so you need to have your part on level ground. After about 3 minutes it starts to get slow, that's when I trained it down the drip rail rear side. 2 minutes later it is gooey and unworkable. Ten minutes it is hard.

Roof is basically finished now and looks totally fine/factory. I'll probably block it down 2 more times before paint, but that's another lesson.

VA72C10 11-20-2010 02:24 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
very nice....even though we're mad at you for leading us on and making us wait ;) j/k. Keep up the good progress!

Hart_Rod 11-20-2010 08:57 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
Looks great! I need to get motivated and work on mine.....

steppside69 11-20-2010 09:03 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
:metal:

FRENCHBLUE72 11-20-2010 09:31 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
Damn man you do great work for sure...

JohnC 11-20-2010 09:38 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
Looking good man! Keep it up.

67cheby 11-20-2010 11:39 AM

Re: ** YOUNG FRANKENSTEIN** The truck Chevrolet should have built.
 
looks AWESOME!!!


All times are GMT -4. The time now is 02:15 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com