Re: 1978 Chevy Sport Re-creation
Quote:
|
Re: 1978 Chevy Sport Re-creation
3 Attachment(s)
Made a steering wheel to maneuver it around the shop. :):)
|
Re: 1978 Chevy Sport Re-creation
5 Attachment(s)
Trans cooler lines done.
|
Re: 1978 Chevy Sport Re-creation
4 Attachment(s)
Fuel lines complete.
|
Re: 1978 Chevy Sport Re-creation
Clean x clean.
|
Re: 1978 Chevy Sport Re-creation
misled,
This is a very clean build. your attention to detail I think rivals "N2TRUX". I am in the beginning stages of a daily driver build (on here too) and will be using some of your details to help with mine. thank you for the time of sharing..... great build so far!! |
Re: 1978 Chevy Sport Re-creation
Quote:
|
Re: 1978 Chevy Sport Re-creation
1 Attachment(s)
I read through and might have missed it. Can you tell me about this switching valve? I plan to run a similar system on Jake.
|
Re: 1978 Chevy Sport Re-creation
Quote:
|
Re: 1978 Chevy Sport Re-creation
Ken,
This is the selector valve: http://products.pollakaftermarket.co...n-valve/42-159 Can handle up to 65psi fuel pressure. This is the kit they offer that comes with the selector valve, a DPDT switch, the connector for the valve and a switch plate that has main & aux indications. http://products.pollakaftermarket.co...n-valve/42-300 The link has another link to a installation sheet with a great diagram for installation. the factory wiring and dash switch can be used to control the valve also. |
Re: 1978 Chevy Sport Re-creation
Quote:
|
Re: 1978 Chevy Sport Re-creation
Quote:
Here is another good article, that I forgot about yesterday... http://67-72chevytrucks.com/vboard/s...d.php?t=754061 |
Re: 1978 Chevy Sport Re-creation
Quote:
This is the valve included in the kit I bought from GMACHINZ here on the board. I appreciate the compliments all........some days I feel I will croak before I ever get the darn thing done. |
Re: 1978 Chevy Sport Re-creation
Quote:
|
Re: 1978 Chevy Sport Re-creation
Any updates on this amazing build!?!
I cross-posted your first/original pic here: http://67-72chevytrucks.com/vboard/s...postcount=2751 |
Re: 1978 Chevy Sport Re-creation
Ugggghh, not much......been super busy at work:(:(
|
Re: 1978 Chevy Sport Re-creation
Sub'd.
Lots of great work here. Very clean and detailed. |
Re: 1978 Chevy Sport Re-creation
Nice build, :metal:
|
Re: 1978 Chevy Sport Re-creation
Quote:
|
Re: 1978 Chevy Sport Re-creation
Very clean and detailed work!
|
Re: 1978 Chevy Sport Re-creation
Quote:
https://www.ebay.com/i/303480327780?...90c986ff83e109 |
Re: 1978 Chevy Sport Re-creation
Looking great man, keep up the killer work!
|
Re: 1978 Chevy Sport Re-creation
1 Attachment(s)
I have never seen a chassis get snow-foamed before. Good work, that's great.
|
Re: 1978 Chevy Sport Re-creation
Very nice! im in !
|
Re: 1978 Chevy Sport Re-creation
misled,
Nice cleaning shot!! I was wondering if you might share what you used? I am looking to do same on my back half soon. also i am wondering if you have a plan for the wire connections for the elec. fuel pumps? and what you plan to do for the engine wiring. .... as always... great work!! |
All times are GMT -4. The time now is 01:59 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com