Re: 1950 Chevy 3600 Woody R
 

Massaging that right rear corner
That corner ready for filler

Re: 1950 Chevy 3600 Woody R
 

The front cowl metal was so stretched that the only real option was to cut it out, straighten it, flap disk the sides, (to make it fit again) and weld the piece back in.
We’ll have to do the same on the drivers side

Re: 1950 Chevy 3600 Woody R
 

We finished the upper cowl
no to fill, and then on to the lowers

Re: 1950 Chevy 3600 Woody R
 

got the alternator bracket assembled, but the AC bracket didn’t come with instructions
I think it looks killer!

Re: 1950 Chevy 3600 Woody R
 

We cut the hole for the AC lines to enter the cab
we will put "door edge guard” on the steel edge, we couldn’t find an appropriate grommet
This shows that all 4 hoses fit through
We spent some time figuring out what ends we needed, had to order 45s for the top.

Re: 1950 Chevy 3600 Woody R
 

We also got the corner of the cab nearly there
And did bodywork to the upper cowl
Laid the initial coat of filler

Re: 1950 Chevy 3600 Woody R
 

Looking good Chris...Jim

Re: 1950 Chevy 3600 Woody R
 

Thanks Jim, we’re trying to make this one special!

Re: 1950 Chevy 3600 Woody R
 

First we took that vent out
Then we worked on the upper cowl
as you can see, it’s looking pretty darn good!

Re: 1950 Chevy 3600 Woody R
 

Next we ironed out the dents on that passenger cab corner
a final fill, and she’s razor straight
then on to the headlight bezels
we have the basic look, now to braze metal from the stock bezel to the harley one
Then we stripped and cut down the inners (the cut for the A-frame will happen later)

Re: 1950 Chevy 3600 Woody R
 

we finally figured out the AC bracket
But we will be unable to paint the alt and compressor engine color. We are unable to get the alternator casing apart for paint.
We also pulled the chassis in the shop
Put on the spacers and wheels, this thing is gonna look killer!

Re: 1950 Chevy 3600 Woody R
 

Looking good. We gotta figure out the sideways pics though lol

Re: 1950 Chevy 3600 Woody R
 

lol... Don’t know why it does that

Re: 1950 Chevy 3600 Woody R
 

so the right upper cowl is ready for paint, but we found a dent in the beltline we’ll need to address
The left upper cowl had a high spot that required bodywork and another fill as well as a small dent in the beltline

Re: 1950 Chevy 3600 Woody R
 

There is a little book called the key to metal bumping. It is a short read and worth the time. Maybe help you with those little high and low spots. A shrinking disc is also a great tool if you have some time to practice.

Re: 1950 Chevy 3600 Woody R
 

There was body damage where the mirror was bolted do
as well as a dent from door hyperextension
so we cut out the damaged metal, straightened, recurved, and welded it back in
And here’s a link to a video of us melting the lead in the seam https://www.facebook.com/olesarge201...01162355536046

Re: 1950 Chevy 3600 Woody R
 

I still have lead spray spots on my garage door from removing the lead from my 57 roof drip rail. I though I would heat it and give it a shot of air. Yeah, not doing that again lol.

Re: 1950 Chevy 3600 Woody R
 

And the compressor came in, so we cleaned, painted, and installed
The new tensioner and knock sensors came in, so we installed them too
and finally we stripped the gas tank, driveshaft, and wiring from the chassis. Tomorrow we start rebuilding the front suspension!

Re: 1950 Chevy 3600 Woody R
 

Have one, use it! Thanks

Re: 1950 Chevy 3600 Woody R
 

Yeah, I don’t think air would not be a great idea!

Re: 1950 Chevy 3600 Woody R
 

We got the patches in the left cowl
And started laying filler
Wyatt really is getting good at bodywork
We also fabbed up the throttle pedal

Re: 1950 Chevy 3600 Woody R
 

Then Steven and Wyatt started to tear apart the front suspension
We prepped and painted it in undercoat
Tomorrow we start putting it back together

Re: 1950 Chevy 3600 Woody R
 

OK, I have to admit I've been dilatory in checking out the links you provide. Today I went to your Facebook and ".com" links to check things out.

VERY NICE!

If I can ever get in a road trip up that way, I'm stopping by to see you and that shop. I'm glad you are doing and posting this work. It keeps me motivated.

Robert

Re: 1950 Chevy 3600 Woody R
 

Thank you buddy! Feel free to stop in any time, I love showing off my work!

Re: 1950 Chevy 3600 Woody R
 

Today we installed your 99-02 Silverado throttle cable
here are shots from the inside and the firewall