Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

THANKS DAVE!!

I'll be the first to pull the "official" trigger when you get the GB going then. I'll look forward to seeing your post & then the tank. They look awesome!!

:metal:

Hope the move goes smooth for you guys.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I'm in as well... bed fill EFI tank with ROV and all the fixin's!!! Can't wait to bolt it in...

Thanks Dave!!!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

any of you guys using the efi Walbro GSS-342HP pump setup that comes with the efi version with a 6.0? is it adequate?I dont really plan on doin too much to this motor maybe a cam and intake swap... just trying to see if I need to order the efi tank with the fuel pump installed or get one setup to go with my own pump.T.I.A!

Nevermind did some research online and it is fine.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I use a Pierburg pump, I wont change my pump setup when I get my tank made. I would if I was going to buy a tank AND a pump anyway tho.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

GROUP BUY PRICING STARTING 9-7-10

NORMAL PRICE = 349 tank + 34.00 sender + 34.00 safety vent +39.00 shipping

GROUP BUY STANDARD TANK- 349 shipped SAVE OVER $100.00
Includes:
-Bed or side Filler
-0-90 ohm sender
-Safety Vent
-Baffles

NORMAL EFI TANK = 648.00 + 34.00 + 34.00 + 39.00 shipping

GROUP BUY EFI TANK = 591.00 Shipped SAVE OVER $164.00

Includes
-Bed or Side Filler
-0-90 ohm sender
-Safety Vent
-Walbro GSS-342HP intank pump
-Baffles

The pricing is now "LIVE" on the site. Normal Production times are 7-10 Business Days.

Order online. Click Link
http://www.boydwelding.com/products/...transfer-tanks

Call 352-447-2405 M-F 9-5:30 EST

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave sounds good I will be ordering when I get back from vacation 9-12-10

quick question what if I wanted the efi Tank WITHOUT the pump what would the price be?...my buddy has a Walbro GSS-342HP pump and said I can have it... he upgraded because he supercharged his car.also all I would hafta do is put his pump in right wouldnt need to purchase anything else because everything else is included i.e. sender etc.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave... I'm in!!! Will place my order 9/7/10. Thanks

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave.. one question... what would be a good shipping estimate to Savannah GA (31312)?

Thanks

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Looks like he's shipping for a flat rate of $39 included in the price.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I'm in for a bed fill!!!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I'll order one tomorrow.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Shipping is Free to the continental US

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave

How do the bed fills work with a wood floor? I just don't want it to end up right next to a cross sill.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I tried to order one on the website and it would not process it. I left a message on your website too.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I'm ready to order too but have the same question as SWB4X4. Can the EFI version be ordered without the $250 pump? Is that the only difference?

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Thanks for the Heads up. everything is operational now. There was a problem with there not being a shipping charge you will notice that the website will charge .01 cent for shipping.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Yes and no. It is not just the pump that makes up the 250.00 charge the pump itself is only 130.00 or so the rest of that is our brackets, hardware and labor to produce the EFI System.

If you already have a Pump you would like to use send it to me and i will be more than happy to adapt that to your tank.

You can always buy a non EFI tank and make your own EFI system if you have the capabilities. Either way your getting a Great deal.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

As far as I am aware the location of the filler should place it in the middle of a board. I would spend a few minutes and check for yourself just to be sure.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

this answers my question.... I will order the one for efi icluding pump..Thanks again for hookin up another Group Buy!:metal:

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I ordered mine after talking to Dave in person yesterday (before his post). Wondered if there was more to it & his explanation made total sense. I wanted as simple of install on my end so I got it all included too.

Thanks for your help, time & such a great deal Dave!! :metal:

Guess I should start a build thread one of these days now. :lol:

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

.....hmmmm decisions, decisions.


:lol:

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave, looks like the product is doing very well...

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I ordered mine yesterday. I can't wait to get it installed. I hate my foam filled fuel cell. I never know how much fuel I have. :metal:

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave,
Sent payment for EFI tank. I'm looking forward to getting it.
Dean

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I'm in for an EFI tank!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave have you experienced any issues with the website? Tried to purchase EFI tank this morning and got the message "transaction could not be completed". I will give you a call later this morning to place my order over the phone.

Thanks again for the Group Buy and the great product.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Guess it was a good thing i have been slacking on the truck. Count me in on a regular tank, i'll order tomorrow.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Whats the deadline for this GB? I want a standard/bed fill tank for my wood floor step bed. I'm just waiting for some funds to transfer before I order...........

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Great!

We are closed for Labor Day. We will be open again on Tues the 7th.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I Usually run a Group buy for 30 days. We will have to see.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

OK great. I'll be ready for one before the end of the month.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I'm in for one if my camaro sells this weekend. Got someone to come look at her, if she sells I'll order mine Sunday.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

just ordered my bed fill tank up. Thanks. can't wait for it.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave,

Please check PM

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

How many gallons?? I was hoping for about 27 to 30 for my 3/4T 4X4, long bed, Also, would the cross member need to be moved? Thanks.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

pm sent

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

These tanks are approx 19 gallons. No the cross member should not need removed.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave did you get my PM I sent last week. I wanted to see if you could add a return line to my tank order.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I did. because of the quantity of requests all tanks will have a return fitting on the top of the tank.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

GROUP BUY ENDS 9-24-10



If you have been dragging your feet now is the time.

http://www.boydwelding.com/products/...transfer-tanks