Re: 97 3500 454 4x4 project
 

getting closer

Re: 97 3500 454 4x4 project
 

Holy pearl paint batman we've got a white cab! The bed is next!

Re: 97 3500 454 4x4 project
 

Soooo close now! Colour looks great!

Re: 97 3500 454 4x4 project
 

Got some.color down!

Re: 97 3500 454 4x4 project
 

Looking good!

Re: 97 3500 454 4x4 project
 

Thanks all! This has been a much more drawn out process than I intended lol.

Re: 97 3500 454 4x4 project
 

Time and money, no matter how much you think it will take, it always takes more!!!

Truck is looking good, will be nice when it is done!!

Re: 97 3500 454 4x4 project
 

Thanks! I'm ready for the bed to get wrapped up so I can start working on it again. Waiting on paint has been a killer.

Re: 97 3500 454 4x4 project
 

So, what is the clour from/called? Is it a pearl or a type if candy. Small pucs on my cell are hard to tell.

Re: 97 3500 454 4x4 project
 

Terrick,

I stuck with painting it the color of my wife's Subaru, crystal white pearl. I'll have to ask Derrick about the brand he used if you'd like. I've not had a chance to see it in person yet, but hope I can Saturday if I can get away from my soon to be born grandson's baby shower. I'm supposed to keep the other ones entertained however. :ennyd:

Re: 97 3500 454 4x4 project
 

I may have a truck to work with again by the weekend.

Re: 97 3500 454 4x4 project
 

Finishing up with the jambs. Today is a pretty good day. My 5th grandchild was born too!

Re: 97 3500 454 4x4 project
 

Congrats on both accounts!

Re: 97 3500 454 4x4 project
 

Thanks!

Re: 97 3500 454 4x4 project
 

That is looking fantastic.

Re: 97 3500 454 4x4 project
 

Thanks!

Re: 97 3500 454 4x4 project
 

Are you planning to run the OE fender flares on the rear? I see the holes in the front but not on the bed.

Re: 97 3500 454 4x4 project
 

Yes, I found a set off a 99 suburban that looked like it had never been off the hwy. They're silver, but Derrick is painting them black for me. I'll have to drill holes in the bed, it came without them.

Re: 97 3500 454 4x4 project
 

Looks a lot better with the bed back on. Still a little more buffing and painting the flares black.

Re: 97 3500 454 4x4 project
 

Looks great!

Re: 97 3500 454 4x4 project
 

Yep, it sure does look good!

Re: 97 3500 454 4x4 project
 

Finally got her home today. I'm helping my father-in-law put a new floor in his shed, but if I don't get called in to work I'll start working on this again.
The grill and flares are in the cab, probably do those first.

Re: 97 3500 454 4x4 project
 

I bet that feels great!

Re: 97 3500 454 4x4 project
 

:metal:

Re: 97 3500 454 4x4 project
 

I've got a little done to it, but I'll have most of the day today. What little time I had yesterday I was able to get the cab lights and cargo lights on with led lights, first time they've worked in years I bet, plus the grill and started on the flares.

Re: 97 3500 454 4x4 project
 

Wow, those are bright!!

Re: 97 3500 454 4x4 project
 

Dosen't show a lot, but I did get the bars on, finished cleaning the seals and got those back on. Put the outside door handles on and that locking link was a chore! Taped up the plastic on the inside of the doors again, just need to double check on the speaker wires in the back before I put the panels on. Anyone know if I have to hook those wires up anywhere? I hooked the speakers up on one side, but didn't get any sound so something is amiss.
The tow mirrors are on though I have to wire them up before the front panels go back.
At least it's coming together.

Re: 97 3500 454 4x4 project
 

Nice job on this thing! It has come a long way from when you started.

Re: 97 3500 454 4x4 project
 

Thanks Greenlee!

Re: 97 3500 454 4x4 project
 

I've got the back door panels on and spent a good part of yesterday working on the speakers in them. I went and checked 88gmc's thread after having no sound and saw the doors are wired, but dead end in the pillar. So, I pulled the pillar panels back off and spliced into the rear speaker wires, which ran along the bottom of the pillar under the carpet to the rear. I ran wires for the right side under the carpet to splice on that side to keep from having to pull the rear panel off from that side.

Re: 97 3500 454 4x4 project
 

Amazing how a couple of small things can take so long, especially when its your truck. Pulling wires thru can be so tedious but rewarding. Looks great.

Re: 97 3500 454 4x4 project
 

A guy I work with is going to scrap out his 96 that was in an accident and told me I could have what I wanted before he hauled it off. I got a few things just in case, it was picked over pretty good though.
I've been busy, seems like everyone wants to take vacation in the summer, but I've got a few days now that I can finally work on the truck again. I do have the flares bolted on, had to take the wheelwells off to do it, but running the camera cable to the back should be much easier now.

Re: 97 3500 454 4x4 project
 

Just went through the whole thread you have done a heck of a job what part of Arkansas are you from ?

Re: 97 3500 454 4x4 project
 

NE AR close to Armorel and thanks!

Re: 97 3500 454 4x4 project
 

is that HIS cluster ? that is a pre 95...89-94 basically, most pre 92 didnt have the tach...i have one laying around, and guys try to find them.

Re: 97 3500 454 4x4 project
 

The cluster pictured is most certainly not pre 95.


Always nice to come up with spare parts!

Re: 97 3500 454 4x4 project
 

i didnt realize they were that close with the bezel removed, i would have pictured a more curved surround.

Re: 97 3500 454 4x4 project
 

It's already in my truck too. There must be something amiss with my original cluster. It didn't have any lights working when I bought it and after changing them out I still didn't have any. I swapped clusters and it lights up like a blue Christmas tree now.

Re: 97 3500 454 4x4 project
 

Your truck has come a long way, Looks Awesome! Nice Work!

Re: 97 3500 454 4x4 project
 

Thanks!