Re: Project 78 High Sierra
slowly but surely but after getting my right tire fixed yesterday my left front is flat ERG!
|
Re: Project 78 High Sierra
1 Attachment(s)
Pic with the masking off
|
Re: Project 78 High Sierra
1 Attachment(s)
Well after painting the cluster and putting new gauges in it I had to put new white faces on so...Here is the cluster all over again
|
Re: Project 78 High Sierra
Your dash rebuild is awesome
|
Re: Project 78 High Sierra
Thanks
|
Re: Project 78 High Sierra
4 Attachment(s)
Got bored and had to work remotely so i painted another Solid Dash Bezel....Not perfect but it didnt turn out bad
Probably will just sell it |
Re: Project 78 High Sierra
how much would you be looking for it?
|
Re: Project 78 High Sierra
Well its not perfect by any means and normally ive seen people selling good quality (Plastic wise) for about $65....So me being me...I would sell it probably for $50 plus shipping
Yet again i want to say the paint isnt perfect...there are a few dark spots of the black and what not... Its an AC unit with the top AC piece not attached...I might have one though.... and it has no clear coat on it Also the right corner has a small chip in it |
Re: Project 78 High Sierra
Im really close to tearing my dash apart, I was looking at the billet ones but those run around $100, so I might get back to you once I got it apart and am at decision time
|
Re: Project 78 High Sierra
cool man...Just let me know...
|
Re: Project 78 High Sierra
5 Attachment(s)
Sanded, and masked the driver door off and areas where over spray may occur
Primed with Sandable primer Primed with high build primer Waited 30 mins and sanded with 320 grit |
Re: Project 78 High Sierra
4 Attachment(s)
hit the door with 4 coats of blitz black paint (Satin Black)
|
Re: Project 78 High Sierra
2 Attachment(s)
took masking off the door...Found a couple of spots i had to touch up but nothing major
Also sprayed the left edge just in case i didnt have it over far enough |
Re: Project 78 High Sierra
5 Attachment(s)
A few little things done this A.M. Removed the old rusted out and almost gone batter tray...Hit the support with the wire brush and some left over Rust-Oleum Professional Semi Gloss Enamel, hit the new tray with the enamel and then I hit the brake thing with it too just because...Didnt even wire brush it...Figured why not...Prob will get some flat black for it eventually but since i was there and had some drop still on the truck just hit it...
Also installed my LMC Relay Harness |
Re: Project 78 High Sierra
installed the wind seal back on the door this weekend and that's about it.....Woke up late Saturday and then went ot see my friends new born. After that went to KY to watch UFC and didn't get back until Sunday afternoon..bah i don't like my weekends wasted like that lol
|
Re: Project 78 High Sierra
woohoo...Order for more Aerosol can of Blitz black so use on the door jambs and such of the other side....2 other cans will probably used on the underside of the hood
|
Re: Project 78 High Sierra
Quote:
|
Re: Project 78 High Sierra
Quote:
|
Re: Project 78 High Sierra
Quote:
Posted via Mobile Device |
Re: Project 78 High Sierra
yeah a lot of guys use them on here...Its just a matter of being patient and lining them up. This is actually my second set due to having some bad gauges but i really like them and hey go great with my Blue LED bulbs..Its only like $25..basically just big white stickers
|
Re: Project 78 High Sierra
Looking good Brother!
|
Re: Project 78 High Sierra
4 Attachment(s)
Well with 99 degree weather and 50% chance of rain I said screw it and went to work today...
I previously had sanded everything down yesterday so I started with cleaning everything off, and masking the door and cab.... Also since that last door I decided it was wise to use my respirator this time lol Hit it all with 3 cans of high build primer and now im letting it dry... 30 mins after finishing it started to sprinkle so luckily the primer drys fast... I also had an extra glove box door and decided that since I have changed from painting the truck the stock color to Blitz black I can now paint the interior... So I bought some Rust-Oleum Sun Rise Red that I thought would match the seat better... |
Re: Project 78 High Sierra
2 Attachment(s)
Stock glove box door vs Test Painted Door
Test Painted door next to seat red What do you all think? Close enough match? |
Re: Project 78 High Sierra
Rain is slowing me down and its making me mad....Its suppose to be 50% all weekend and i want to hit the door with the paint before next week car show...UGH!!!
|
Re: Project 78 High Sierra
the rain and heat is slowing every body down man
|
All times are GMT -4. The time now is 12:44 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com