Re: "All Out Original 72"
 

http://blog.powerblocktv.com/?p=1641
http://blog.powerblocktv.com/wp-cont...truck_main.jpg

Re: "All Out Original 72"
 

They are 8 or 10 inch, on a Chevy Colorado rear end with a 4 link and coilovers.

I wanted to Armorall the tire treads in that pic, and they said it wouldn't show...I did get to play with Courtney's ruby red shoes from Paris, she's more than meets the eye for sure, she's not reading from a monitor, she reads the lines for a few minutes before the take, and has it memorized that quick! Amazing, I've never met anyone with that kinda memory.

Re: "All Out Original 72"
 

She could ride in my truck anyday! :lol:

BTW. Did I hear ya say you are working on another 72?

Re: "All Out Original 72"
 

Yes, I am building one like this for someone. Medium green, and white, but with a wood floor this time. It should be as nice, or better than the last I hope! Already have most everything for it, so it should go pretty fast, the weather isn't cooperating very well right now! I need to get the frame home from the blaster...

Re: "All Out Original 72"
 

I can't believe I never saw this buid thread. Great job!

Re: "All Out Original 72"
 

Absolutely dyno-mite!

Re: "All Out Original 72"
 

Thanks very much!!!

Re: "All Out Original 72"
 

And Thank You too sir!!!!!!!!!!!!!!:metal:

Re: "All Out Original 72"
 

You got another build thread for the other 72 you are building?

Got my 68 in Dad's garage right now. Been putting the wood floor back in it.

Re: "All Out Original 72"
 

That was the coolest thread I have ever seen. Your build was truly outstanding. I love they way these trucks look when they are all original. Great job and god bless.

Re: "All Out Original 72"
 

I am building another 72, I almost have a rolling chassis, engine and trans. are almost ready to install. I haven't started a build thread yet, I wanted to get farther along, so it wouldn't drag out so long...This one's gonna really be nice, I have found a lot of good parts, stop in and check it out!

This truck will have a wood floor, Cypress, I'm still debating on painting it, the wood was supposed to be painted either black, or the color of the truck. I'm building this one to compete for an AACA Senior title, so it needs to be painted...

Re: "All Out Original 72"
 

That was a very nice comment!!! I agree with you, these trucks look really nice restored to original. They are an eye catcher for sure! I have done the chop, drop, flop, thing ( About to do a 40 Plymouth coupe), but original is much harder, you have to follow a guidline, and everyone picks out the finest of details! With modified builds, you can use you're own imagination, the sky, and dollars, are the only limits! Thanks again!

Re: "All Out Original 72"
 

Well, it is pretty easy to pickout the finest details on your '72. It starts at the front bumper and ends at the rear bumper, then start at the ground and go upt o the roof. See? Simple! ;)

Re: "All Out Original 72"
 

I picked up some old weathered barnwood on a job in Georgia and had a family member that owns a cabinet shop over in Cottontown to plane it down, cut it to length, and cut the grooves in it. Turned out great for my build. Just letting you know in case you decide to do your own wood instead of buying it.

http://s305.photobucket.com/albums/n...t=IMAG0469.jpg

I would ride over right now if I knew you were gonna be there. Killing some time today.

Re: "All Out Original 72"
 

That looks nice T' I will be here again this evening, you're welcome to come by!!! I already have the Cypress ready to install!

Re: "All Out Original 72"
 

LOLOL ! That's agood one! I think the new one will be a lot better!

Re: "All Out Original 72"
 

Hey Roadracer where are you I am in Pulaski, TN, there is a member here on the board with an NOS wood floor I will find his info and PM you.
What town are you in I would love to stop by and get some ideas I am in a debate with myself about the metal work my local guy here is saying give him a day and I have stoped in and talked with another forum member about doing the work but he is a couple hundred miles away. Nothing beats good prep work. Any ideas where a man can find good NOS parts I am always looking.
West

Re: "All Out Original 72"
 

I am in white House area, 40 min. North of Nash. I have a body man in springfield, you've seen his work, slow, but good! I Have a couple of places for NOS, PM me what you're looking for.

Bought the wood floor I guess, working on arrangements, Thanks Again! :metal:

Re: "All Out Original 72"
 

Amazing just read the entire thread and I am impressed.
My gramps had a 78 that he cared for like a child, I can remember three times he had the seat redone! Good times original is best!

Re: "All Out Original 72"
 

Thanks, twas a lot of hard work!!!

Re: "All Out Original 72"
 

Let me know when you get the wood I want to come see original GM wood. I will be using mine as a real pickup truck no need to put in something that will just get beat up
West
Posted via Mobile Device

Re: "All Out Original 72"
 

I will be glad to, I will PM you! We are working on how to ship this stuff, Dixie says it weighs 180 lbs. I'm sure it will be cheap! LOL ! I'm waiting to hear back from him. Thanks again for all of your help!!!

Re: "All Out Original 72"
 

any updates on this? About the bed wood or anything else?

Re: "All Out Original 72"
 

Very nice! Whats the price tag to date?? Still very nice!:chevy::chevy:
Wish i had the time and space to do it!

Re: "All Out Original 72"
 

Just looked through this whole thread. What a beautiful truck! All I can say is wow! Attention to detail is amazing.
Posted via Mobile Device

Re: "All Out Original 72"
 

Beautiful truck.

Re: "All Out Original 72"
 

omod, thanks for bringing thread to top, so we all can enjoy this thread!!!