Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Thanks Dave!! But i was talking about the 2 terminals on the sending unit on my non EFI cell, sorry i didn't say that in my post.. :)

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

No Problem, thanks for trying to help!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Any update Dave?

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

call me

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I was talking about the pump, so your pics are very helpful. Thanks.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Our supplier uses 2 different types of senders under the same part number. your tanks will have 1 of the 2 senders pictured below. the power wire goes to the middle post and the ground wire either goes the smaller lug or you have to use one of the mounting screws.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Thank you for taking the time out of your busy schedual to reply Dave, I appreciate it!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Hey Dave,

Have you talked to UPS yet since I spoke with you on the 22nd. I will try and take some pics of what we were discussing so you can have a better idea of what I am talking about.

Thanks,
Kevin

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Hey Dave can you do a EFI Tank for my 68 Camaro? have you done one for any 1st Gen Camaros?

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave, I was wondering if you have built any for a 65 swb stepside. I'm really wanting to get one of your tanks so I can have some stereo where the old tank sits. Anyone on this site have one for a 65?

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Impalaboy,

They should work just fine, these should have no problem fitting 63-72 step or fleets. You can thumb through the thread and Dave put some measurements up and you can verify.

I will be getting one when they do the next GB in the spring.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Here are some pics of our tanks at SEMA.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Tanks look great Dave... can't wait to get mine installed.

Question... anyone got pictures of one of Dave's tanks with a hidden hitch installed?

Thanks

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

if i ordered a efi tank next week what kind of time frame would i be looking at

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

7-10 business days. I Have 2 NON-EFI tanks on the shelf ready for immediate shipment.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I started at the beginging of this thread...... is the group by long gone or still around?

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Im pretty sure it is done, I think Nov 30 was end. Dave usually has a GB two times a year, usually in like March and October, give or take.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

well im in for a group buy! so if anyone wants to try and see if we can make this happen let me know.

I need a non efi tank for my 71 short bed.

If it has to happen in march or so Ill wait as well just let me know

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I dont plan on doing another untill march. However i do have a NON-EFI bed filler and side filler on the shelf ready to ship.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Subscribed .

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

You have some very nice products, Mr. Boyd - I will definitely consider something for my truck in the near future

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Hello, do you by chance still have the side fill non efi, and if so how much and is it still the discounted price? Will it work for efi external pump?

Thanks chris.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

to anyone with one of these tanks completely installed, plumbed, etc.....thats "bed fill"....show us some pics of how you did the bed? Is there a door in one of the planks with the filler below...or did you flush mount something in the wood plank?

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave, has anyone adapted one of these into a 73-87? I might be interested in another EFI tank for my 78 soon.


Edit: NVM I scrolled up to post 332 :lol:

Any mods to make it fit that frame? I see the mounting brackets are different.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Chris,

Yes i have a side filler non EFI. Yes it will work with an EFI External pump.

349.00 tank
-10% discount
39.00 shipping to your location

give me a call if you want to get one ordered.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Hey Dave, what kind price difference is there during the group buy? Is it the 10% you quoted above? I'm interested in a non-efi, 90 degree feeder w/ sending unit. Thanks

Also, my mechanical fuel pump will work fine, correct?

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I think this is going to be my next buy for my 65. Measurements look ok but sure would like some pics of one in a 65.
Thanks
Jimmy

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave
I am ready to get one. So let me know what is in stock or if you need to make one.
Thanks
Jimmy

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Dave said the next group buy starts in March.... only a couple of weeks away.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I know the group buy is on the way but the truck has the bed off right now and is on the lift while I am doing the disc swap. Now is just the perfect time to do this swap. Gonna call Monday and get one built or on the way.
Jimmy

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

The smell of March is coming soon Mr. Boyd. Any dates on when your group buy may start. Been planning on this buy for a few months. Thanks Rob

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

We are planning it as we speak. I will know better once we get back from the 3 day Winter Extravaganza at the Sumter County Fairgrounds this weekend the 18th 19th 20th. If anyone is local stop by our booth.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I have a question on the safety vent. Would the hose barb on the safety vent be used for the fill vent hose on a side fill? If I fill the tank and the fill hose gets full of fuel such that the fuel level is higher than the top of the tank does the fuel safety vent leak?

Will the fill vent hose connected to the safety vent hose barb allow air into the tank as the fuel gets used?

Also, my electric fuel level gauge came with a 200-34 ohm sender (i'm pretty sure I got that right). Would the price of my tank be less since I don't need the 0-90 ohm sender?

Anxiously awaiting the group buy!!

Mel

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

Definitely interested in the group buy as well.....needing a tank for my project.

Does anyone have any pictures of this tank installed on a 67-72 1/2 ton? Interested to see how far down the tank hangs and how visible it is with rear bumper installed.

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I need an efi right now. But i would also really like to save some money! Group buy!

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I hear it coming im in on the group buy

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

count me in as well! im ready when you guys are! lol

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

I needed one a little sooner so I ordered it last Monday. They called in Thursday and told me it was ready to ship and I got it today! Great service, a super looking tank and turn around time as quick as I have ever had anything made. Thanks Dave for the work of art that showed up today.
Jimmy

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

OK now you're just rubbing it in! lol I need one! haha

Re: Boyd Welding-67-72 Rear Mount Aluminum Tank
 

March is rapidly approaching. Is everyone ready for this group buy. I guarantee it will be the best one ever offered.