Rack bodies,Dump bodies,Flat beds
 

Lets see them all in one thread.
Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

How about Grain bodies? I just saw this one and grabbed a couple shots. The rest of what I have are already in the picture thread stickies

Re: Rack bodies,Dump bodies,Flat beds
 

Thanks special K yes even grain bodies.
keith.

Re: Rack bodies,Dump bodies,Flat beds
 

I sure do miss that Bowtie on Heavy Trucks today.

Re: Rack bodies,Dump bodies,Flat beds
 

Elder believes the truck was used to haul manure in it's later years of service before retirement(late 80's). This is how it worked for the less-than-25 years it put in, though. (it's actually tongue-n-groove)
Second photo is how she sits today. You can see a lone remnant of the past yet to be removed.

Re: Rack bodies,Dump bodies,Flat beds
 

Very cool what's your plans for it.
Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

What wheels and tires are you running.
Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

I took that nearby. The other day I wished I had my camera. I passed a few different places where there was utilities, road work, or farming going on and all the trucks were GM medium or heavy duty trucks. I saw a General dump truck going down the road, too.
Me too.

Re: Rack bodies,Dump bodies,Flat beds
 

Well to be honest I've already completed it! I wanted it to be a flatbed tow vehicle for project cars and such. A workhorse, and not pretty. And that is definitely what it is.
Wheels were RH5º, now they are one piece modern 22.5x6.75 with 235/80-22.5. Ride well.

Re: Rack bodies,Dump bodies,Flat beds
 

Thanks definitely looks like a work horse. Where did you get the wheels.
Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

Oh, I got them on the website Wheelsnow.com part number 28160
Not a very affordable transaction, but I needed a hauler and it economically made sense at the time.

Re: Rack bodies,Dump bodies,Flat beds
 

I bought the wheels from them also. 28160J. They aren't cheap as jumpsoffrock noted, but what can you do when you don't have any other option. I looked for a solid 2 years and only found two 22.5 originals.

I painted mine to match, but they seem like a good product. They are a bit thicker though, so the rear lugs are actually inside the threads by one or two. I need to find some swivel flange nuts that hopefully aren't as tall as the original lug nuts.

Re: Rack bodies,Dump bodies,Flat beds
 

Wow that a beautiful truck do you have more pics or a build thread.
Thanks Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

That is the most beautifulestest stake body... Love it to death

Re: Rack bodies,Dump bodies,Flat beds
 

Thank you. I love the truck. I stumbled upon it a few years ago. The truck only has like 29k original miles on it. A guy was going to tear it down to use the cab and hood for a 1/2 project. I talked him out of it and was able to buy the whole truck. I though it too clean to tear apart. I wanted to save it and restore it. Its not done yet. So far just the mechanicals have been done and the paint. I still need to do the frame, bed wood, bed sides and the stake racks themselves.

I always sort of thought it cool to fix one up like this. Most car shows I attended growing up had mustangs, Camaros, etc. You never really see stuff like this and it seems even most non-auto-hobbyist appreciate something such as this. I know I do. Its been a frustrating and expensive journey so far, but I think its worth it.

I do have some more pics of it...they are scattered about in multiple threads.

I should have a build thread, but.....I don't. I can attach a few more photos.

Re: Rack bodies,Dump bodies,Flat beds
 

Thank you. Me too :)

Re: Rack bodies,Dump bodies,Flat beds
 

a few more from what I have

Re: Rack bodies,Dump bodies,Flat beds
 

Looks great.

Reminds me a lot of my '64 C-30 Stake Bed. Same color, including the White Wheels, same type Stake Bed, also a Straight 6 and also Restored, although mine was never finished. Once I got it looking good and road worthy, I started using it, lol. This was in the early 80's. Ran it on the road for over 9 years. One of the best trucks I ever had. Still have it as a parts truck.

Re: Rack bodies,Dump bodies,Flat beds
 

Very cool. I plan to use this one, although with the fresh paint, I sort of feel bad about stepping on the running boards now. This one runs good and had the engine gone through by the previous owner. I think a 235 carb may have found its way onto the engine. This one is a 261 and to my understanding GM made a specific carb for that engine. If not that, it was set up specifically for a 261. This truck has the SM420 4 speed with a I think a 7.42:1 single speed rear axle. It spins pretty high to make 55 mph, but that's how they ran back then I guess. When I drove it last, it seems to slow down a bit much on a grade without being loaded. I need to check the timing etc to make sure its right, but I figured without a load, it should keep up on its own. I need to investigate more when I have time. Otherwise, it runs and drives like a dream...for what it is anyway. The radials seem to have helped the ride a good amount.

Re: Rack bodies,Dump bodies,Flat beds
 

(Jumpsoffrock extremely jealous under his breath): Psshhhhhhh... 29,000 miles this......29,000 miles that....look at that dumb original interior, and those stupid doors not rusted to smithereens....



.....My truck had 29,000 miles before it left the factory! :sumo: Or at least that's what its condition would lead one to believe. :whine:
























:D

Re: Rack bodies,Dump bodies,Flat beds
 

LOL,

Your truck rules just the way it is. The fact that you got it out and back on the road and running again is all that matters. Yours just has more "character" than mine :)

My K25 is like your truck...rusty, dented, used....maybe not as fun to look at, but a hell of a lot more fun to use as intended. :)

Re: Rack bodies,Dump bodies,Flat beds
 

Just bought this 62 today.

Re: Rack bodies,Dump bodies,Flat beds
 

Looks good.

Tell us more about it (Engine, Trans, etc).

Re: Rack bodies,Dump bodies,Flat beds
 

These truck look great keep them coming there has to be a lot more on here and since I started the thread I will be posting mine in the next couple days.
Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

Ok guys here is mine I have not had it long but I drive it every day to and from work a little slow but it is all original as far as I can tell. It is a 1951 chevy model 6400 2 ton dump.
Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

Looks real solid and pretty nice.

Looks like it has low miles on it.

Like the Rollback too.

Re: Rack bodies,Dump bodies,Flat beds
 

Thank you it is solid no rust some dents a lot of chips and scratches it has 48834 miles on it. the roll back is a work horse with 397890 miles on it.
Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

Come on guys there has to be more of these trucks that you guys want to show off I don't care about the condition.
Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

Nice looking truck. That looks to be in outstanding original condition. What the history on the truck? I can't imagine thats a northern truck looking as good as it does. Most of them rusted away to oblivion up there. Unless it was like mine and was parked in the winters so it never saw any road salt.

Re: Rack bodies,Dump bodies,Flat beds
 

Thanks JPBrecheisen I brought it from a gentleman in Connecticut and he got it from one in long island who got it in south Dakota and as far as I know it has all ways been garaged in the winters. And it is in fantastic shape there is no rust on the truck just the usual dings and dents. Do you have pics of your truck.
Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

Thanks JPBrecheisen I brought it from a gentleman in Connecticut and he got it from one in long island who got it in south Dakota and as far as I know it has all ways been garaged in the winters. And it is in fantastic shape there is no rust on the truck just the usual dings and dents.
Keith.

Mine is the red 1960 C60 Viking stake body earlier in this thread.
Posted via Mobile Device

Re: Rack bodies,Dump bodies,Flat beds
 

Yes I know and it is a beautiful beautiful truck wish I owned it you should be proud of it I know I would be.
Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

I am, and thank you. I will see if I have a few more pics to post. I was hoping others would post their own after this thread got going.

Re: Rack bodies,Dump bodies,Flat beds
 

Me too I know there has to be a lot more of these trucks out there.
Keith.

Re: Rack bodies,Dump bodies,Flat beds
 

I saw this one in Republic, MO today at an antique tractor and steam engine show. 1971 GMC 9500 with 671 Detroit and a 13 Speed Road Ranger and Hendrickson walking beam suspension. I would love to have this with a roll back on it.

Re: Rack bodies,Dump bodies,Flat beds
 

Beautiful truck.

Chrome package to boot.

Re: Rack bodies,Dump bodies,Flat beds
 

Wow, that is a beauty!

Re: Rack bodies,Dump bodies,Flat beds
 

This is a plain old single axle flatbed......ought to make some of you feel better about your trucks.......I just bought this one
[IMG]https://farm6.staticflickr.com/5719/...b4e34856_c.jpgExterior of my spare parts truck. by Greywuuf, on Flickr[/IMG]

this is a Chevy, stil lnot sure what series ( assuming 70 ) currently a 5 speed with a 6v-53 low short tilt front and a single axle

Re: Rack bodies,Dump bodies,Flat beds
 

iif you dont mind rough, here is a chevy flatbed
[IMG]https://farm1.staticflickr.com/585/2...4a0e9aed_c.jpgSuprise! by Greywuuf, on Flickr[/IMG]

Compared to that Black one earlier this one aint much but at least I have a direction!