1969 - 70 cab cuts and parts from part out
 

I am dis-assembling a 1969-70 LWB Fleetside currently. The cab is an A/C cab with quite a bit of the original A/C only components. I am going to cut up the cab as the outer floor and sills are shot - cab corners too. However, the area under the seat and at the 'hump' is good and solid.
The frame and rear axle will be for sale too, as well as parts of the fleetside bed - which had a wood floor from factory. All cross sills are good and the inner fender wells seem to be good, but haven't unbolted them just yet to verify.

Parts either not present or that I am using myself are: engine, trans., seat, dash, w/s wiper set-up, w/s squirters, steering column.

Parts too bad to use except for patch panels or small parts: doors, front fenders, rear fleetside bed outsides.

I don't have pictures yet, but hope to get some taken later today and posted tonight.

Re: 1969 - 70 cab cuts and parts from part out
 

Price on wood floor cross sills including rear if in good condition?

Re: 1969 - 70 cab cuts and parts from part out
 

Got some pictures now - here they are:

Attachment 1448391

Attachment 1448392

Attachment 1448393

Attachment 1448394

Attachment 1448395

Re: 1969 - 70 cab cuts and parts from part out
 

More photos:

Attachment 1448404

Attachment 1448405

Attachment 1448406

Attachment 1448407

Attachment 1448408

Re: 1969 - 70 cab cuts and parts from part out
 

Still more:

Attachment 1448409

Attachment 1448410

Attachment 1448411

Attachment 1448412

Attachment 1448413

Re: 1969 - 70 cab cuts and parts from part out
 

And once again:

Attachment 1448423

Attachment 1448424

Attachment 1448425

Attachment 1448426

Re: 1969 - 70 cab cuts and parts from part out
 

I have added photos of these parts so you can now see the condition of them. I think the rear cross sill is good, but didn't inspect that carefully when shooting photos - I will look it over much closer tomorrow and get back on that part.
As for pricing, how about $15 each for cross sills and $40 for rear if it is good plus shipping cost to you. Might do better on price if you buy all of them together rather than just a couple of pieces. Let me know what you think . . . Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Other prices so far:

A/C components SOLD!

LWB Frame with rear axle set up, but minus the lower a-arms on front (they are spoken for) Trailing arms? are in good condition and there are overload springs on it too! $325.00

Cab cuts depending on what / how much you need - ask for price

Inner fenders on Fleetside bed for wood floor $45 SOLD!each and shipping

Any cuts from Fleetside bed sides - ask for price

Re: 1969 - 70 cab cuts and parts from part out
 

5 main sills and rear sill pending condition and shipping to 30530?

Re: 1969 - 70 cab cuts and parts from part out
 

Undone - will check condition and shipping for you and reply here with results. Thanks, Jay

Re: 1969 - 70 cab cuts and parts from part out
 

I did a much closer inspection of the cross sills and they look really good - no rust through only minor surface rust. Most of them still have some of the original black paint on them. There are 5 of the same size cross sills, 1 cross sill that is a shorter profile to fit in right over the highest part of the hump in frame, 1 rear-most main cross sill at back of bed.
If you want to purchase everything at once with shipping (UPS $44.00 or FedEx $48.00) I would do $150 total with which ever shipping option you choose included in that figure. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Jay, I'd like to get in line on the cross sills and rear piece. I can pick up being we are 30 miles apart. Thanks Gregg

Re: 1969 - 70 cab cuts and parts from part out
 

Gregg - OK, you are next in line if the first person passes. Anything else you need? I have several parts that I haven't listed. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

I need the area around where the switch screws in on the cab in the door jam. My 67 does not have the raised area where these mount and I want to add them in my 67 cab. Please be a little generous with the cut. What would you charge for these ( both pass and driver) shipped to S0K2T0 in Canada? Rod.

Re: 1969 - 70 cab cuts and parts from part out
 

Rod - I haven't shipped anything to Canada before so you could probably tell me more about it and help me do it correctly / cheapest. As for the cuts - I am going to take a couple of pictures of the areas that I think you are asking about. My cab doesn't have holes for door jam switches, but it does have a raised area with a 'dimple' as a center point to drill holes. Just want to make sure we are talking about the same thing. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

That sounds right. No holes is even better. USPS is the best and easiest I believe. I would think you could just box them up and go to your USPS office and they would help you. They also should have standard size boxes at a fixed shipping rate for small stuff like these.

Re: 1969 - 70 cab cuts and parts from part out
 

I'll take them.

Re: 1969 - 70 cab cuts and parts from part out
 

Undone - PM regarding payment info.

Re: 1969 - 70 cab cuts and parts from part out
 

OK, thanks for the tips - I will look into the USPS and see what they say. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Greg - Undone has passed on the sills - so they are yours if you want them. Let me know. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Rod - I checked USPS.com for rates and the most reasonable was an envelope or small box, Priority International for $22. I would charge $15 for the cuts, making a total of $37.00. Let me know what you want to do. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

ill take them. Please be a little generous with the cut so I have some metal to work with. please post pic's of the cuts and Pm me paypal address. Also if you would sell just the spring that opens/closes the fresh air door in the cowl area separate I would be interested in it as well. Rod.

Re: 1969 - 70 cab cuts and parts from part out
 

Payment sent

Re: 1969 - 70 cab cuts and parts from part out
 

Yes Jay I'll take them. I'll try and call you later to set up a time to pick them up. Thank you

Re: 1969 - 70 cab cuts and parts from part out
 

I noticed the A/C dash was cut off. Do you still have it and is it for sale if you do?

Re: 1969 - 70 cab cuts and parts from part out
 

I still have it and will be using the dash in the truck I am currently building. Thanks for your interest though. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Payment received and will be getting the cuts in the next couple of days so that they can go out the first of the week. Thanks, Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Thanks again Jay for the cross sills. They will work great in my truck. It was good meeting you and enjoy looking over your parts lot and talking trucks! I will be getting back with you on some more things I'm sure.

Re: 1969 - 70 cab cuts and parts from part out
 

Super to have you stop by! Look forward to being able to help you out again. Good to meet you and hope to see you again soon. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Parts sent! Tracking #LC854847025US through USPS. I'm sorry that I didn't notice your request for the fresh air door spring until after I had everything packaged. I think what I have is what you are looking for, but I don't think you want to pay $15-20 to ship it by itself. IDK how expensive just a first class letter would be.
Here are a couple of photos of the areas when I marked the cut and those are what is on the way to you. Thanks for purchase! Jay

Attachment 1452053

Attachment 1452054

Re: 1969 - 70 cab cuts and parts from part out
 

Thanks. I'll take the spring too. Send me a pm with total. Thanks, Rod.

Re: 1969 - 70 cab cuts and parts from part out
 

Let me get a photo of it and post so that we are sure it is what you are looking for. Thanks again, Jay.

PS- What about the size of the cuts I sent - OK? Sure hope so.

Re: 1969 - 70 cab cuts and parts from part out
 

cuts will be just fine. the spring is in the 2nd photo of post 5 on the right side under the cowl that goes between the body and the cowl door.

Re: 1969 - 70 cab cuts and parts from part out
 

OK, I see what you are talking about - I thought maybe it was the spring that went inside the cab by passenger's feet on the vent door in A/C application.
I do have both springs and will get the one you asked about and send it to you. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Is there a difference between the inner fenders for a wood bed and a steel bed?

Re: 1969 - 70 cab cuts and parts from part out
 

I don't know if they are the same or not. I looked in an LMC catalog and couldn't see that they listed two. Either no one repops the ones for wooden floor beds or they are the same ones used on both applications.

Hopefully someone who knows will 'chime' in to give us some guidance. In the mean time I will try to find out more.

Jay

Re: 1969 - 70 cab cuts and parts from part out
 

I have placed a post on the discussion forum asking and have gotten two answers so far and they think they are the same. One person has a pair that came off of each one - steel floor and wood floor - and they are going to check them out side by side. Should know for sure pretty quick. Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Thanks for doing the research Jay.

Re: 1969 - 70 cab cuts and parts from part out
 

ekgguy - I finally got confirmation that indeed the inner fenders on fleetside beds are the same in wood floor beds as they are in the steel floor beds. So, are you interested in mine? Jay

Re: 1969 - 70 cab cuts and parts from part out
 

Do you still have the cab? I need the left rear corner of the cab.