"All Out Original 72"
4 Attachment(s)
Well folks, I started this build, 5 months ago, I like another 2 or 3 months to finish. The truck was purchased in Arkansas, had a pretty good cab, but the bed was a rust bucket, and the "Whole" truck was absolutely worn out! I have been a mechanic, by trade, for 31 years now, so I know these trucks pretty well. I have taken every metal part you will see in the photos, and sandblasted, etch primered, and painted, or replaced, and then some! This truck will be at least, 95% restored with NOS, still in the boxes original GM parts! I found a fellow locallly who had a mountain of these parts. I have paid dearly for them, but wow, it's been nice finding them! I still like a few parts, that you guys will come thru with I'm sure! I hope you all enjoy this build as much as I am. I figured if I started this thread now, and started posting the pics I have, I would be finished by the time I downloaded the pics. LOL ! I have noticed that most of the builds posted are somewhat, or extremely modified! I hope you folks won't pick on me too much for being an "Ole School", original type guy? Thanks to all, and comments good, or bad, are welcome, I hope the good outweigh the bad for sure !
|
Re: "All Out Original 72"
5 Attachment(s)
A few more....
|
Re: "All Out Original 72"
5 Attachment(s)
And some more.
|
Re: "All Out Original 72"
5 Attachment(s)
I have more, just so you know what I started with.
|
Re: "All Out Original 72"
Those lower control arms have sure taking a beating in the past haven't they ?
|
Re: "All Out Original 72"
5 Attachment(s)
And well, here's some more.
|
Re: "All Out Original 72"
5 Attachment(s)
The cab, and bed.
|
Re: "All Out Original 72"
5 Attachment(s)
Now the frame.
|
Re: "All Out Original 72"
5 Attachment(s)
Frame disassembly.
|
Re: "All Out Original 72"
3 Attachment(s)
And waalaa, the frame!
|
Re: "All Out Original 72"
Quote:
|
Re: "All Out Original 72"
Everythings off to the sandblaster, frame, control arms, engine craddle, springs, crossmember, spindles, ahh, you get the idea.
|
Re: "All Out Original 72"
Engine apart, to machine shop, transmission to rebuilder. Now it's buy, buy, buy $$$ ! UGH !
|
Re: "All Out Original 72"
3 Attachment(s)
Frame back from blasting, primed, and sprayed in chassis black.
|
Re: "All Out Original 72"
5 Attachment(s)
Rearend tear down, sandblasted, primed, painted. New; bearings, seals, limited-slip differential, brakes, hardware kits, and wheel cylinders. All hardware parts, and any, "Bare Metal Parts" were clear coated to help prevent rust.
|
Re: "All Out Original 72"
3 Attachment(s)
More rear.
|
Re: "All Out Original 72"
5 Attachment(s)
Doors; Both window regulators were shot, the hinges were worn out, just normal wear. Both doors to sandblaster, then bodywork. Haven't finished them yet.
|
Re: "All Out Original 72"
Great start. No problem with "original" from me!
|
Re: "All Out Original 72"
Looks great so far :cool:
|
Re: "All Out Original 72"
Quote:
|
Re: "All Out Original 72"
4 Attachment(s)
A few pics, going back together...
|
Re: "All Out Original 72"
Roadracer,
Very nice project you have going on! Are you using original springs? Also, do you have a pic of the front of your motor? I need a pic showing pulley placement if you can. Thanks! |
Re: "All Out Original 72"
5 Attachment(s)
Now to the front. I have somehow lost a lot of photo's on this darn computer, so I'll have to jump a few. The camera shows every spec of dust, it has since been washed and dried with my leaf blower!LOL !
|
Re: "All Out Original 72"
looking great, good luck on the project. Trevor
|
Re: "All Out Original 72"
5 Attachment(s)
More front suspension.
|
Re: "All Out Original 72"
Quote:
I do not have the pulley's on yet, I will in a week or so, sorry. They are simple though, and I have them painted, and ready. |
Re: "All Out Original 72"
Quote:
|
Re: "All Out Original 72"
5 Attachment(s)
Well, here's a rolling chassis, finally! Every maintanance part has been replaced, brgs, seals, ball joints, rotors, calipers, control arm shafts & bushings, new posi rear carrier, every steel brake, & fuel line new, and clearcoated, all rear end bushings, complete park brake system new, and so on, and so on....it's a brand new chassis! Hope you like , I sure am proud!
|
Re: "All Out Original 72"
5 Attachment(s)
A few more chassis. I hope the Mods/admins are ok with all the pics.
|
Re: "All Out Original 72"
Roadtacer, something I thought I'd mention.
You should remove the bolts from your upper ball joints and reinstall them the other way, with the nuts on top. The reason is that once you fill the grease boot full of grease and it pooches out, the threaded bolt ends will rub against the boots as they are now when the suspension cycles through it's range. Most brands of ball joints have a little instruction sheet in there that warns to do it this way. I know it seems wrong, having bolts in upside down, but in this case it is right. |
Re: "All Out Original 72"
5 Attachment(s)
Couple more...
|
Re: "All Out Original 72"
Quote:
|
Re: "All Out Original 72"
Oh, and I have already greased it, with juuuuust enough not to "Pooch". LOLOL!
|
Re: "All Out Original 72"
So you're building it just to have and keep? Not going to be a driver ?
|
Re: "All Out Original 72"
Oh I will drive it, just not as a daily. Some showing, probably sell it later on. Build something else...
|
Re: "All Out Original 72"
2 Attachment(s)
Transmission before, and after. High heat cleared, etc.
|
Re: "All Out Original 72"
5 Attachment(s)
The engine building pics were lost as well, D$#%^T ! So here's a few , I don't have many yet, haven't spent much time there yet.
|
Re: "All Out Original 72"
3 Attachment(s)
Some more engine...
|
Re: "All Out Original 72"
5 Attachment(s)
How bout some cab action?
|
Re: "All Out Original 72"
wow, nice build.
|
All times are GMT -4. The time now is 04:14 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com