1968 C20 partout
 

This ones a little rough folks. 68 C20 , 250 3 on the tree. Anything you can see is up for grabs but to hit the big points-


250 Motor/ Tranny- supposedly ran before they pulled the carb. $300

HO rear end- unknown ratio but it isnt frozen up. $150

Tailgate- rough , slightly bent on the inside, and rusty on the bottom seam but would be good for a beater truck or a bench maybe??? $125

Hood- Inside structure is actually in really good shape, starting to have some rust issues. Is dented, once again good for a beater $50

Hood hinges- good shape $65+ shipping

Radio dash cut $80+ shipping



Located in Conneaut Lake pa, many other parts available

Re: 1968 C20 partout
 

dang i could use that rear end too..
price and condition of fenders?

Re: 1968 C20 partout
 

Fenders are super rough, they have about 2" of bondo on them lol. I do have a repop 67 driverside fender and a decent 68 Pass fender.

Re: 1968 C20 partout
 

damn thats a bit too far for me to go for that rear end.. ugh,,,,,

Re: 1968 C20 partout
 

I can ship via freight but it won’t be cheap

Re: 1968 C20 partout
 

itd be miserable to freight that heavy rear end, and probably about 600.00 to freight it. but thank you

Re: 1968 C20 partout
 

How much for the lic plate ?

Re: 1968 C20 partout
 

how much for them rear bumper brackets?

Re: 1968 C20 partout
 

Shes kinda beat lol. Ill do it for $20 shipped

Re: 1968 C20 partout
 

$50 shipped?

Re: 1968 C20 partout
 

We will take it…….

PM sent

Re: 1968 C20 partout
 

sounds decent.. if you could send a pic when you can... just wanna mke sure theyre the right ones and nor rusted thru and such

Re: 1968 C20 partout
 

Yup no problem if you want to PM me your number I can send pics over at noon.



Thanks!
Nick

Re: 1968 C20 partout
 

What's the condition of the front turn signal light housings?

Re: 1968 C20 partout
 

I don’t see them, but is there any headlight eyebrow trim?

Thanks

Re: 1968 C20 partout
 

Man, that would make a cool patina build!!!

Re: 1968 C20 partout
 

Are the hood latch bolts the original 12 point heads? If so, price ? Assuming they aren’t rusted to the point the threads are stripped when removed.

Re: 1968 C20 partout
 

No 12 points sorry

Re: 1968 C20 partout
 

No headlight trim Sorry



Nick

Re: 1968 C20 partout
 

If it is in good solid shape and you are interested in cutting pieces out of the cab I am looking for the are of the inner cowl by where the outter cowl bolts on.

Re: 1968 C20 partout
 

Sure, Passenger side?

Re: 1968 C20 partout
 

Yes passenger side.Cut out as shown or even maybe slightly bigger.

Re: 1968 C20 partout
 

Let me get that truck to the point of that tonight and I will make sure its solid before we figure out a price.



Thank you!

Nick

Re: 1968 C20 partout
 

Sounds good. Appreciate it.

Re: 1968 C20 partout
 

I checked on it tonight and it was completely gone. I have another truck coming this weekend. I will check it and let you know.

Thank you
Nick

Re: 1968 C20 partout
 

Gotcha. Appreciate it.

Re: 1968 C20 partout
 

been looking for rh inner fender if not rotted out at the radiator support been looking for
a good oem thanks

Re: 1968 C20 partout
 

Any success with the second truck this weekend?

Re: 1968 C20 partout
 

I will check tonight ! Sorry I just didn't get that far yet.


Thank you

Re: 1968 C20 partout
 

Looking 67/68 for side molding trim pieces:
both doors
both cab corners
both bed sides
one rear wheel arch

Let me know if you can help :metal:

Re: 1968 C20 partout
 

Hey! I have some of that. Check this thread for pictures of what I have.


https://67-72chevytrucks.com/vboard/...d.php?t=850480

Re: 1968 C20 partout
 

Just PM'd you. Let me know

Thx
DTT

Re: 1968 C20 partout
 

Just checking back in to see if you got a chance to look yet?

Re: 1968 C20 partout
 

Hey sorry I responded but it apparently didn't send. This one is in rough shape.



Nick Burns

Re: 1968 C20 partout
 

So both cabs a junk right there?

Dang it. Thanks for looking.

Re: 1968 C20 partout
 

Do you have the steering gear mounting bolts? Should be 4 if I’m not mistaken .

Re: 1968 C20 partout
 

Good morning, the frame to steering box bolts?

Re: 1968 C20 partout
 

Yessir,
I believe there’s 4? Frame to gear box..