72' Stepside 2 1/2 Rockwell Pond Truck
5 Attachment(s)
Cab Floor Repair lots of it. i am building one bad 1972. i bought this truck for 400.00. it ran pretty good. 307ci with a th350 tranny, long bed, no air, no power steering, perfect just what i was looking for. i sold the tranny for 150.00, the rearend for 150.00, the bed for 150.00. i gave the 307 to a friend. this is all after my 10 year old had the motor sitting on it's side from jumping it out of the retention pond behind the shop. a friend gave me a short wheel 4x4 frame. i am using a step bed off of a nother parts truck.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
5 Attachment(s)
More Cab Repair
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
5 Attachment(s)
the cab in this project was a little worse than i thought at first. it had never had any paint work done to it so i new there would be no surprises. but there was. after i had spent the money to have it media blasted i felt oblegated to us it.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
5 Attachment(s)
i did some finish work on the bottom side. it will be easily seen with the height of the truck. i am going to spray the bottom with bed liner
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
5 Attachment(s)
one cab corner down and looking good.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
5 Attachment(s)
here are a couple of frame pictures.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
3 Attachment(s)
some more frame, and mighty rockwells, omaha orange paint
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
Wow!!!!!!!!!!!!!!!!!!!!!!
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
OH SNAP disc brakes on rockwells kool subed
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
5 Attachment(s)
i used 1984 toyota front rotors and calipers. i had to turn the inside of the calipers and redrill the holes. i made the cariper brackets
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
5 Attachment(s)
at this point i started assembling the frame. i got excited and took no pictures of the frame being painted.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
5 Attachment(s)
i am very excited about the roller. i am waiting on the motor. it is a .040 over 400sbc. suspose to pump out 600 to 650 ponys.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
5 Attachment(s)
a little work on the bed fenders.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
5 Attachment(s)
i started o n the bed it will have an expanded metal floor, 12 gallon fuel cell with sending unit. a oil and tranny cooler.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
2 Attachment(s)
a couple more bed pictures. i glued in some angle. i am building a 1 inch square tube floor.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
:jdp::jdp::jdp:wowzers dude! that is a serious rig... i wish my cab looked that rough....
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
3 Attachment(s)
pre paint frame pictures and the next project, 1972 suburban
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
Thats is gonna be killer when its done...
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
My Plans For The Truck Are To Trailer It To Weekly Mud Boggs Around The Area That I Live In No. Fl. Some Of The Biggest Baddest Trucks Are In Fl. That Is Probably Because Of The Sheer Number Of Events Through Out The Year. I Am Going To Paint The Inside Of The Cab Orange And The Roof Orange. Maybe The The Inner Fenders, Radiator Support, And Hood Hinges. But The Rest Of The Out Side Will Be The Pepper Gray That You See On The Differentials. I Have Chrome Door Panels, Glove Box Door, Insturment Panel, (which Is Stuffed With Autometer Liquid Filled Gauges). A Through The Dash 4 Point Cage, Bucket Seats, Cheetah Scs Shifter, I'll Put Up A Picture Of My Home Made Double Stick Transfer Case Shifters When I Get Them Back From The Chromer. There Bad, A Little Idea I Got From A Friend That Makes Ornimental Gates And Fence. The Column Is From A Stick Shift Truck. I Am Looking For A Billet Steering Wheel That Has Two Crossed Pistols In The Middle. The Only Real Body Mods Are Filled In Gas Filler Hole In Left Cab Corner, Smothed Cowl Panel (to Keep Out Mud), Filled Fresh Air Vents In Kick Panels, I Also Cut Out The Area In The Dash That Was Set In For The Radio, Made That Smooth. I Have Tsl Boggers On It To Roll Around I Also Have A New Set Of 18.4-16.1 American Farmer R1 V Treads. The Funny Thing About Them Is There Made In China. They Are 47 Inches Tall.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
:jdp:
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
All I can say is WOW! Great work.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
Geebus! What a monster! Looks like a lot of fun!
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
WOW!!!! I dont know what else to say but WOW
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
:metal: :metal: :metal:
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
4x4's aren't normally my thing, but this isn't a normal 4x4. keep us posted on the progress.
tivo activated! |
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
very impressive work.looks like ive got to get my sh#t in gear
to get mine done as soon as you. how tall do you think the roof will be on those 47's? i think the roof of mine will be at about 10.5' on 54" vtreads. love the truck,hoping to trailer mine down for one of the big mud events down there next spring.:metal::metal: |
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
2 Attachment(s)
*DROOLING* that thing is gonna be awsome man! nice work! its gonna make my "Skytation" look like well.... as my brother put it "a normal citation"
just incase you are wondering...thats a Chevy Citation on a '77 K5 Blazer frame.... |
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
TRARS (truck-cars) make my mullet grow! very cool *and no im not being an ashhole*
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
That truck will be sweet when it is done. How hard was it to install the disc brake stuff on the rockwells? I am looking at buying a complete truck to use for a build of my own. Where can you buy aluminum 6 bolt wheels for these axles?
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
there are several options on disc brakes for the rockwells.from buying a
very simple bolt on kit to a fairly easy to make your own brackets and piece together a set. aluminium wheels are a little harder to find for rockwells.several places make steel wheels,or if youre gonna run tractor tires you can just make(or have made)your own centers. |
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
we just got back from our family vacation. we had a great time in pigeon forge, tn. we went to dollywood. i was so impressed with the old time craftsmen there. wood, leather, glass, copper, sand casters, and even an old barn were they make old time wagons.
tallhoedude the truck is 6feet tall to the floor board with the 44's. i am not sure how tall it is to the roof. i hope to get the bed done in the next week and a half. i got my 16 x 16 aluminum REAL RACING WHEELS from chuckstrucks.net . they were 300.00 each. dieselwrencher i made the rear brakes from 84 toyota 4 x 4 front rotors and 4 piston calipers. |
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
Quote:
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
Thanks bighead. Did you use the factory drums on the front or did you do this on all 4 corners?
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
the toyota style rotors that i have on the rear will not work on the front because of clearance between the hub and steer knuckle. i am not going to run front brakes at this time.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
My Motor Man Called This Afternoon . He Said He Had My .040 Over 509 Casting 400sbc Mocked Up . Everything Looked Good Except I Need 1.6 Roller Rockers Instead Of The 1.52's That I Bought. I Am Now Getting Excited.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
Gonna be one of the coolest mud truck around!
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
This is going to be one slick truck!
Nice work! |
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
I Have Been Going Round And Round With My Motor Builder. I Did Not Use My Regular Guy Because He Told Me He Was Six Months Backed Up. So I Took It To Another Man That Came Recominded By Several People I Know. He Has Now Had My Parts For Ten Months. The Motor Is Close To Being Done. But Now The Man Is Going On Vacation For Two Weeks. So Buy The Time He Buttons It Up Brakes It In And Tunes It On The Dyno, I Am At Least Three Weeks Out. Why Is It That Few People Have Honor In Doing What They Say.
|
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
yukon jack
thanks i have been a long time fan of your truck. great look. i want one to pull this truck around with. i have a 71 /20 gmc i have been thinking about using. i love the bed on your truck. the lift is just right as well. |
Re: 72' Stepside 2 1/2 Rockwell Pond Truck
BIG HEAD, what wheels did you use? And where did you get em?
|
All times are GMT -4. The time now is 02:52 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com