slik ricks 67 short wide CST
hello everyone!
i am rick i try to keep a pic on every page so it doesnt get boring!:lol: well i am in high school and am building my first project with my dad in 2009 in june, brother helped but now lives in sacromento . this is going to be a 1967 chevy CST 2wd 1/2 ton i hope to make it look like this http://67-72chevytrucks.com/vboard/a...1&d=1297530665 here are the specs : BODY 1 67 side trim 2 semi gloss black paint for the exterior 3 72 5 lug 15x5 5 on 5 bolt pattern 67 stock dog dish hub caps 4 red chevrolet letters for tail gate 5 chrome front and rear sport bumpers also chrome wing windows BED 1 swb fleetside 2 wood floor 3 white oak wood INTERIOR 1the sheet metal will be black with red accents 2 red accents: dash pad,steering wheeel and column, sunvisors , seat ,door panels 3 buddy buckets will be done factory design in red 4 left and RIGHT sun visors 5 black carpet 6 am fm radio with 67 knobs for the entire dash 7 heater cab but might end up going A/C 8 3 guage cluster looks cleaner 9 electric choke...... 10 A/C conversion after it is all running and driving for a while ENGINE ,TRANNY AND DRIVE TRAIN 1 302 ,69 camaro engine 2 holley street dominator aluminum intake 3 edelbrock 1406 600cfm electric choke 4 stock 67 air cleaner 5 power steering 6 4 core radiator 7 350 transmission 8 disk brkes in front 9 possible disk brakes in the rear! 10 5 lug 72 suspension enjoy thanks ,Rick EDIT december ,21 2010 tuesday 11:54 SHE DRIVES DOWN THE STREET AS OF 10/20/11!!!! |
Re: slik ricks 67 short wide custom/10
well here are some more [IMG]72chevytrucks.com/vboard/picture.php?albumid=945&pictureid=8557[/IMG] http://67-72chevytrucks.com/vboard/p...pictureid=8554[/IMG] http://i1210.photobucket.com/albums/...g?t=1294117504 http://i1210.photobucket.com/albums/...g?t=1294117504 http://i1210.photobucket.com/albums/...g?t=1294117504
|
Re: slik ricks 67 short wide custom/10
Cool! You started a build thread! I'll be following along!
|
Re: slik ricks 67 short wide custom/10
subscribed, keep up the good work!
|
Re: slik ricks 67 short wide custom/10
Lookin great, subscribed!
|
Re: slik ricks 67 short wide custom/10
thank you david hope you enjoy, your 67 is commin along!
heath hope you like it as well you got one slick 67 goin va72c10 thanks hows the blazer commin along! well my brother is a paint and body man. my dad he was in the army as a engineer so he worked on the dusnahalfs and dump trucks, and jeeps alot so he s good with engineering and my grandpa tayght him alot about engines they rebuilt my dads 327 from his 65 malibu ss |
Re: slik ricks 67 short wide custom/10
http://67-72chevytrucks.com/vboard/p...pictureid=8549 well the thing covered in the tarp is my frame newly painted with no suspension i have some pics of me taking the frame to the metal i will try to get them sorry for that kid in the photos :lol:the one who takes photos always wants me in them :rolleyes:
|
Re: slik ricks 67 short wide custom/10
Looks good. Did you replace any metal in the cab, or do I just need to move to California so I can buy something that nice?
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
well here is the firewall painted http://67-72chevytrucks.com/vboard/p...pictureid=8558
|
Re: slik ricks 67 short wide custom/10
well i thought you should see it from the begining http://67-72chevytrucks.com/vboard/p...pictureid=9294i will try to get some pics of the frame and suspension process
|
Re: slik ricks 67 short wide custom/10
you're making good progress! Keep it up.
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
here is some pics of my sand blasting and repainting of the frame and suspensionhttp://67-72chevytrucks.com/vboard/p...pictureid=9295
|
Re: slik ricks 67 short wide custom/10
http://67-72chevytrucks.com/vboard/p...pictureid=9305 heres one of the axle http://67-72chevytrucks.com/vboard/p...pictureid=9306 and heres one of the 302 before its long needed bath
|
Re: slik ricks 67 short wide custom/10
well i got a little progress done today i painted my steering colum red factory bright red and my steering wheel it is a tilt colum and yes i will try to get pics up ;)
|
Re: slik ricks 67 short wide custom/10
nice work glad u started a build thread:chevy:
|
Re: slik ricks 67 short wide custom/10
thanks hub:smoke: glad yopu like it
|
Re: slik ricks 67 short wide custom/10
well as i promised pictures of the frame restohttp://67-72chevytrucks.com/vboard/p...pictureid=9348 and anotherhttp://67-72chevytrucks.com/vboard/p...pictureid=9347
|
Re: slik ricks 67 short wide custom/10
i had a step side my dad gave me but i traded my brother for his short fleet so it was a stepper in the background and the frame i got form my uncle who also is on this board EDIT: i have traded the 68 swb fleet bed sides for 67 swb fleet bed sides
|
Re: slik ricks 67 short wide custom/10
Looking good glad to see you started a build thread :metal:
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
well heres more pics http://67-72chevytrucks.com/vboard/p...pictureid=8540 heres my dad playin a goof troop http://i1210.photobucket.com/albums/...g?t=1294117095 http://i1210.photobucket.com/albums/...g?t=1294117095 http://i1210.photobucket.com/albums/...g?t=1294117095
|
Re: slik ricks 67 short wide custom/10
and heres another heres the males of the family http://i1210.photobucket.com/albums/...g?t=1294117095
|
Re: slik ricks 67 short wide custom/10
Rick,
Nice progress. Good to see that the family enjoys all the blood sweat and tears :metal: I will be following along :ito: |
Re: slik ricks 67 short wide custom/10
thanks sleeper..
|
Re: slik ricks 67 short wide custom/10
well here you guys go heres some more picshttp://67-72chevytrucks.com/vboard/p...pictureid=8535 heres is me and my brothers primerjob
|
Re: slik ricks 67 short wide custom/10
my dad just informed me that the engine and tranny will be going in next week well he said any time after sat and sun so i will take pics before and after;)
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
thanks man somthin everyday just like hubscrub:lol:
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
Nice progress
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
Quote:
|
Re: slik ricks 67 short wide custom/10
well i put my engine in today and in the next 15 days maybe the cab to i have taken pics already will try to get pics for you guys
|
Re: slik ricks 67 short wide custom/10
well bought a fuel pump and a new motor nount for the 67 im so glad it is getting put back together !!!!!!
|
Re: slik ricks 67 short wide custom/10
since we re moving cab is going on today :metal: and all the rest of the body
|
Re: slik ricks 67 short wide custom/10
well today the cab plan went sour so maybe tommorrow i can get it on:waah:
|
Re: slik ricks 67 short wide custom/10
I follow along....I'd post more but it would just be me saying
:wop: ;) :chevy: |
All times are GMT -4. The time now is 11:59 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com