The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1988-1998 GMT400 Chevy & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=11)
-   -   TX Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ guages (https://67-72chevytrucks.com/vboard/showthread.php?t=374006)

WIDESIDE72 11-28-2009 09:41 PM

Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ guages
 
5 Attachment(s)
NEW LOWER PRICES!!!!

Front clip, engine trans and most of the interior are gone

1994 Chevy truck regular cab w doors, clutch pedals and dash, no seat, inst cluster or door panels, broken tilt wheel $200 no title. bill of sale only

1994 LWB fleetside bed tail lights and tailgate no rust minor dents on pass side $200

1994 Chevy 3/4 ton 2wd lwb reg cab 8 lug rolling chassis $200

1993 3/4 ton 8 lug 4.10 posi 9.5" rear axle (not full floater- the one shown under the truck in photos has been used) $200

Whole Shebang $600

WIDESIDE72 11-28-2009 09:43 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Rear bumper is gone, I have a stock painted one that is bent up a little that will go with it. Rear axle in pictures is no the axle that goes with truck. All glass is good

BIGphillip79 12-05-2009 06:12 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
1 Attachment(s)
Intersted in swapping my guages, are you willing to do any shipping I am looking for Inst. cluster, cluster harness, and drac.

WIDESIDE72 12-05-2009 09:28 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by BIGphillip79 (Post 3657122)
Intersted in swapping my guages, are you willing to do any shipping I am looking for Inst. cluster, cluster harness, and drac.

See original post: "no seat, inst cluster or door panels..."

66truckin 12-05-2009 09:50 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Did this truck have the factory cupholders mounted to the dash?

WIDESIDE72 12-06-2009 12:12 AM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by 66truckin (Post 3657511)
Did this truck have the factory cupholders mounted to the dash?

I will have to check

SiCk_DiAbLo 12-10-2009 03:15 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
What about the power steering pump,??...

WIDESIDE72 12-10-2009 05:27 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by sick_diablo (Post 3666992)
what about the power steering pump,??...


gone

SiCk_DiAbLo 12-11-2009 02:34 AM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by WIDESIDE72 (Post 3667204)
gone

Thanks anyway...

WIDESIDE72 12-13-2009 08:17 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by WIDESIDE72 (Post 3657766)
I will have to check

I keep getting side tracked, sorry I haven't had a chance to check.

WIDESIDE72 12-15-2009 10:03 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
2 Attachment(s)
The truck does have a light grey factory cup holder. It is a little boogered up on the edges though. $20 shipped

WIDESIDE72 12-15-2009 10:04 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
It looks like I might be moving in the next few months. Any reasonable offers on the truck/ parts will be considered. Otherwise, it will be sent to the scrap yard shortly.

Driveway Dreams 12-16-2009 12:51 AM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Do you have a glove box door? My buddy just picked up an 88 and I thought I would look for a few things for him. If it would work for his truck, he may pick up a few things from you. I will tell him to PM you but you may PM him about what you have. His screen name is THE UGLY.

special-K 01-25-2010 10:05 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
I need a driver`s outer door handle.Is it the smooth gloss black?

WIDESIDE72 02-13-2010 12:38 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
ttt

66coffin 02-17-2010 05:48 AM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
how muchfor the rims only, no tires shipped to 91709?

WIDESIDE72 02-17-2010 09:39 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by 66coffin (Post 3806320)
how muchfor the rims only, no tires shipped to 91709?

Too much hassle to ship rims. #1 I would have to pay to have tires broken down and disposed of #2 they are mismatched early 80's and aftermarket chrome wheels

WIDESIDE72 02-22-2010 02:05 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
ttt

WIDESIDE72 02-26-2010 07:43 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
ttt

Blue_71 03-01-2010 01:31 AM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
if you still have it, would you take $15 shipped on the cup holder?

72BLUZ 03-01-2010 08:53 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
what about the steering column is it automatic, tilt, and delay wipers

WIDESIDE72 03-01-2010 10:39 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by 72BLUZ (Post 3833911)
what about the steering column is it automatic, tilt, and delay wipers

Sorry, the column is broken beyond use.

jtlauer 03-11-2010 12:09 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Have the gray seatbelts? If so how much?
Joel

WIDESIDE72 03-13-2010 01:02 AM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by jtlauer (Post 3853922)
Have the gray seatbelts? If so how much?
Joel

I think I still have them. I will check tomorrow. They are light grey. Do you need all six, or just the outside shoulder harnesses, or what? (BTW, these are for a regular cab truck. Reg cab and ex cab shoulder harnesses are different where they mount to the floor.)

WIDESIDE72 03-14-2010 09:52 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Driver side door sold

WIDESIDE72 03-14-2010 10:50 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by WIDESIDE72 (Post 3857524)
I think I still have them. I will check tomorrow. They are light grey. Do you need all six, or just the outside shoulder harnesses, or what? (BTW, these are for a regular cab truck. Reg cab and ex cab shoulder harnesses are different where they mount to the floor.)

I still have the outer shoulder harness/ lap belt/ retractors for both sides. They are in pretty good shape. I only found one buckle for sure, it is in OK "driver" shape. I'm not sure whether I still have the other, or the lap belts. What do you want, will price accordingly.

WIDESIDE72 03-14-2010 10:51 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by special-K (Post 3757272)
I need a driver`s outer door handle.Is it the smooth gloss black?

Sorry, I missed you r post somehow. I used the ones in the pic. All I have is a textured one off a '97.

jtlauer 03-17-2010 08:35 AM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
I need both outside shoulder harnesses if they work. The reg cab belts are fine with me. Let me know if you have them and how much shipped to 44134.
Thanks, Joel

Quote:
Originally Posted by jtlauer
Have the gray seatbelts? If so how much?
Joel

I think I still have them. I will check tomorrow. They are light grey. Do you need all six, or just the outside shoulder harnesses, or what? (BTW, these are for a regular cab truck. Reg cab and ex cab shoulder harnesses are different where they mount to the floor.)

WIDESIDE72 03-22-2010 09:27 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Driver door sold locally

Driver side seat belt assy sold to jtlauer

WIDESIDE72 07-31-2010 09:39 AM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Ttt

michael bustamante 08-09-2010 07:48 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
do you know if the ac unit under the dash was working ok? mine has the flapper door making all kinds of noise and I have no idea how to fix just the actuator.

WIDESIDE72 08-28-2010 12:08 AM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by michael bustamante (Post 4130907)
do you know if the ac unit under the dash was working ok? mine has the flapper door making all kinds of noise and I have no idea how to fix just the actuator.

Sorry, but the cab of the truck is full of parts from another truck i parted out and not worth emptying out to get the AC box out.

WIDESIDE72 08-28-2010 12:10 AM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
What remains is a rolling chassis with 9 1/2 8 lug 4.10 posi rear axle, full 2wd front suspension, mismatched set of wheels and may pop tires, bed and cab, all rust free, no title. Moving soon make reasonable offer, or I am planning on cutting the frame and making a truck bed trailer out of it.

WIDESIDE72 09-04-2010 09:21 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Ttt

faribran 09-10-2010 05:13 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
is the dash any good?

bigred94 09-10-2010 11:15 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
could you remove and ship a back glass?

WIDESIDE72 09-11-2010 06:15 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by faribran (Post 4183425)
is the dash any good?

Sorry, it is cracked from the sun

WIDESIDE72 09-11-2010 06:17 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Quote:

Originally Posted by bigred94 (Post 4184016)
could you remove and ship a back glass?

Sorry, no, for three reasons... Pulling one of the back windows without breaking it is a major PITA, and so is shipping it without breaking it. I am using the cab as dry storage for parts from other trucks I parted out.:waah:

bigred94 09-14-2010 11:02 AM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
ok thanks for your time

EdB 09-14-2010 03:15 PM

Re: Parting out 1994 Siverado Reg Cab, no front clip, engine trans seat, interior/ gu
 
Are there any jack pieces left. I need the ratchet
and both extensions.

EdB


All times are GMT -4. The time now is 06:24 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com