Ripping apart a 91 Suburban 2500 4x4
 

What do you need?

I have a solid running TBI350 with 4L80E and NP241, harness and computer come with: 1500.00

Corp 14B rear and 10B front with 3.73's: 400.00

Body's trashed.

I bought it for the motor and transmission to put into my 71 K5 but just traded that for a BBC 71 C10 shortbed.

Do you have the center dome light and a pair of side mirrors.


PT

Yes.

:dohh: will you take my first born? that's EXACTLY what i'm looking for for my K20. great price too, unfortunately i'm low on cash.

if it is 2500 then it has the 8 bolt rims.. first what type, are they stock or custom. If customs how much for them plus shipping to 32578?

Come and drive it before you yank it. Transmission was rebuilt 3k milea ago.

Can also make offers.

Hows the front seat, what color and type? The color and condition of the dash parts.


thanks jerrad

Are the mirrors power or non and the dome lamp that I need is the one in the middle of the burb between the front and second set of seats. pics , price and shipping to 29129.


Thanks PT

Non power.

Dome lamp will run you 5.00 and whatever shipping is from 03036. Probably another 5.00.

Front seat is decent. Dash is uncracked, both are blue.

Stock.

if you want to sell the blue dashpad for a decent price, i will probably take it. Any idea on shipping to 70775? Also is it silverado interior? might need some other minor bits.

I'd take 35.00 for the dash pad, if I can remove it safely. No idea on shipping, that's a LONG box and UPS would love to have you pay through the nose for it.

This is a very base suburban.

Would you sell the trans & t-case seperately?You could keep the harness/computer with the engine.

Yes, I would. I can even deliver them for diesel costs.

Give me a total on the mirrors and the dome light to 29129.

PT

i know you said the body is trashed, but are there any good parts on it? im in need of a set of doors, and a front clip. how are the arm rest?
thanks

The grill is ok, I don't remember what the fenders look like.

I can also deliver, as I am running from NH to KY and back again.

I could also deliver this motor, tranny and transfer case...

mainly what i am interested in is the left fender, and the right door... i can fix the rest of the peices i have. could you possibly get pics of these? where in ky are you going?

I can get pics, it's not at my house, or I would run out and take them now.

Nicholasville.

i want that dash pad. as long as it has no cracks. Not in any rush for it though. It might ship usps, i have shipped a roll pan and such through them. I knoe that a 84 f150 dash is within the usps size limit, but not sure of the gm. Whenever you get a chance check that shipping for me please, i will take it if shipping doesn't kill. I know i will think of somthing else i need from it, but that is it for now. Thanks

Sorry man, I had someone look (at a friend's house) and the pad's cracked. Front seats are torn up but the 2nd and 3rd ones look good.

No problem, I appreciate it.
the front grill is single headlight or dual headlight side by side?

Hmmm, How much would you take for the complete engine without Trans?? (my trans was just rebuilt) I would need all the accessories, TBI, and anything else motor related, possibly harness too for my 88 GMC. Just thinking out loud, i've been looking for a decent motor and since your headed this way. ;)

hehe, I am sure we could work something out.

Lol, What can you tell me about the engine? mileage? Need Valve seals?(ie smoke when started) Have you removed a valve cover yet? If so is it all gunked up or fairly clean?........jt

112k on the motor, no smoke, runs well.

Haven't removed a valve cover. It's still in the truck and driving around. Oil's been changed regularly, so I doubt it's gunked.

So...how much for the trans/t-case?You can pm if you like.Looks like you have interest in the motor and maybe computer.

i hate to rain on anyones parade, but that trans without the wiring harness and computer is 10x as worthless as the engine would be without it. you can still bolt a carbed intake onto the engine, but the trans WILL NOT work without the wiring harness and computer. the aftermarket controllers available for the 4L80E run about $750+

Right, which is why the harness and computer's included with the transmission and not the engine. If it splits to anyone else; I imagine Special-K is looking for spares for his truck that already has a 4L80E and Np241.

Painless Wiring has a stand alone harness for 195 at summit that will run the TBI with a 50.00 junk yard computer.

Sorry I missed this. It's a single headlight set up. Grill is very nice, AFAIR.

Buddy really wants this out of his yard.

I really don't have space for it.

I still, really, really need to get rid of this entire thing.

Not to jack his thread, but since his are stock, I have a set of American Racing Mojave 16X8s, Chrome Aluminum, $400+ Shipping. Look just like what's on my Suburban.
http://02ws6ta.cz28.com/Suburban/Sub...Bath%20007.jpg

Oh, and another thing, I'm close to you, no shipping expense. :)

holy high jack Batman!

Oh, and TTT for him. :rotfl:

Still have that grill? I'm trying to find one!

What condition are the front shoulder strap seat belts in? Are they blue?

Still have the grill.

Seatbelts are blue and in very good shape.