Rebuild of my K-10
 

I decided to finally make a build thread for this truck. I bought it in spring of 2007. It had been a former mud run truck and at one point the drivers side got beat up and the door and fender were replaced but left in primer. I painted it right away though so i didnt get any pictures.

http://i381.photobucket.com/albums/o..._06/chevy1.jpg

As you can tell in this picture the drivers bedside had some damage also but i planned to replace the bed so i didnt bother fixing it when i did the door and fender.
http://i381.photobucket.com/albums/o...t_06/chevy.jpg

Re: Rebuild of my K-10
 

I drove it like that for a little while but it wasnt big enough for me with just the body lift so i bought a 4 inch rough country suspension lift, then the tires were to small so i bought some used 36x12.50 Super swampers. I also got a goodmark cowl induction hood and a billet grill around the same time.
http://i381.photobucket.com/albums/o...06/bigblue.jpg

Re: Rebuild of my K-10
 

Then in Sept. of 2008 we got a big wind storm and i was standing on my back porch looking at a little tree that fell on our garage and another tree uprooted and landed on my truck and did this.
http://i381.photobucket.com/albums/o...6/bluerear.jpg

The tree weighed so much that my rear suspension was completely bottomed out and the rear leaf springs had no arch to them untill we got the tree cut up and pushed it off the bed.

http://i381.photobucket.com/albums/o...esmashed-1.jpg
It caused about $4000 in damage so my insurance company just totalled it out but i bought it back for $300 and used my insurance check to buy my sonoma
http://i381.photobucket.com/albums/o...06/sonoma3.jpg

Re: Rebuild of my K-10
 

The truck sat in my back yard and the tires started going flat so put some 31's I had on some rally rims on it and gave the tires away and used the aluminum slots on my 68 GMC
http://i381.photobucket.com/albums/o...1bluetruck.jpg

Re: Rebuild of my K-10
 

then after sitting all winter a guy i work with saw an ad for a 78 chevy truck in our local news paper so i went and bought it as a parts truck because the transfer case was bad and the frame was pretty rotten.
http://i381.photobucket.com/albums/o...blacktruck.jpg
It came with a great running motor and a nice set of tires so i think i got my moneys worth.

Here are both of the trucks together.
http://i381.photobucket.com/albums/o...bluetrucks.jpg

Re: Rebuild of my K-10
 

If anyone noticed in the last picture, the blue truck got a stepside bed that i had laying in my basement in pieces. I had bought that bed before the tree ever crushed my other one because i liked the way lifted stepsides look.

Re: Rebuild of my K-10
 

Well the end of march i decided to start doing the real work i had been putting off. Sorry i didnt get any progress pictures. I only had about 2 1/2 hours of day light to work on it after work each evening so i didnt have time to take pics. I started out stripping both trucks down to there frames. i used the motor and cab from the black truck and put them on my old blue truck frame with 4 speed that was already in the blue truck. Then i put all of the front sheet metal that had come off of the blue truck back on its old frame bolted to the black cab. I then put the stepside bed back on and mounted up the wheels and tires from the black truck. I drove it like that for about two weeks and found a set of cragar 15x10 soft 8's at summit racing on clearance so i bought them and got them mounted up and this is how it looks as of yesterday.
http://i381.photobucket.com/albums/o...Jsbigtruck.jpg
The color turned out kinda funny because i tried to lighten it up so you could see the rims. They just looked like big black blobs on the screen.

Re: Rebuild of my K-10
 

looks like a fun project... I like the aluminum slots...

I also requested to have this moved over to our 4x4 project builds.. that must have been a BIG tree...

Re: Rebuild of my K-10
 

Oh sorry didn't realize there was a different 4x4 section. And yes it was a big tree. You couldnt see the truck when the tree fell on it. I thought everything was going to be crushed but somehow the tree sortof formed a cave over the front end. I still ended up with a dent in my fairly new cowl hood though.

Re: Rebuild of my K-10
 

I take it no one likes my truck...lol

Re: Rebuild of my K-10
 

I like it, Im wondering what your plan is regarding paint/ new body lines. Specificly lower bed line-lower front fender line. Might just be the pic but looks like 2 different levels. I like the way the wheel wells line up and almost match up though. Also what engine/trans/transf you runnin in that beast? Looks like a lot of fun, Keep up the good work, and we lurve teh progress picshures XD

Re: Rebuild of my K-10
 

I'll probalby paint the whole thing blue when i get to that point. My Cowl hood has SS style stipes on it already so i'll probably keep them. The truck has a mildly built 350 w/ Weiand intake and Edlebrock carb, 4 speed tranny, and 205 transfer case. It runs extremely well. I can do a 15-20mph rolling burnout if i get rolling along in first gear and kick the four barrel in.

Re: Rebuild of my K-10
 

would you by chance be willing to sell the spoked wheels in the first picture??

Re: Rebuild of my K-10
 

I sold the spoke wheels a long time ago. They didnt have the right offset for these trucks anyway. They rubbed my tie rod ends a little and you couldnt balance the tires because they took the stick on weights and as soon as you drove the brake caliper ripped the weights off because they were to close.

Re: Rebuild of my K-10
 

Very nice looking truck, too bad about the damage - gonna look very good with the step bed too!

I'm kind of getting the feeling that there isn't too much traffic in this subforum unfortunately.

Re: Rebuild of my K-10
 

Thanks for the compliment.

No love for us 4x4 guys...

Re: Rebuild of my K-10
 

jott06- Dude that truck was sweet as hell at first. Dam that tree. I also like the way it looks rite now. So whats next? More lift? U gonna go with the same color as it was at first? This is an awesome build thread. I've been working on my 84 short wide 4x4 lately also. It has a 6" lift and some 18" wheels with 35's. I want to put a 3" body lift on it next. I didnt mean to hi-jack ur thread, but u got me all excited bout workin on the ol truck.

Re: Rebuild of my K-10
 

I was tryn to post a pic. but somethings up with the ol computer and dont want to work to good. maybe manana. Anyways sweet truck and good luck with it. I like it:metal:

Re: Rebuild of my K-10
 

Their it is

Re: Rebuild of my K-10
 

any updates?

Re: Rebuild of my K-10
 

great build!!!! cool to see you swaped to stepside

Re: Rebuild of my K-10
 

Thanks for all of the compliments. No real updates lately. I did build a floor for the stepside bed though out of 3/4 plywood using all of the factory crossmembers. I got tired of not being able to haul anything.

Rollinsqrbdy
I love the way big rims look on these trucks when there lifted.

Re: Rebuild of my K-10
 

[QUOTE=jott_06;3252356]
http://i381.photobucket.com/albums/o...Jsbigtruck.jpg
QUOTE]

If you look in the background of this picture to the right you can see the stump of the tree that fell on the truck and the fence is still damaged also from the same tree. This was pretty much exactly where i had the truck parked when it got crushed

Re: Rebuild of my K-10
 

i need more pics of this truck lol

Re: Rebuild of my K-10
 

so i got tired of having a multi color truck so i sanded it down and sprayed it with satin black tractor paint. I kept the gloss silver stripes on the hood though. I think it looks pretty good.

Re: Rebuild of my K-10
 

sorry for the small pic. I took it with my cell phone

Re: Rebuild of my K-10
 

shes looking good bud

Re: Rebuild of my K-10
 

well I've been filling my gas tank through the wheel well all summer because my gas tank is on the wrong side for the bed so i decided to get creative and graft a gas filler door into my fender. Its out of a 96 chevy pickup. I used the factory filler neck and hose along with a piece of exhaust tubing i had bent to get it working.

Re: Rebuild of my K-10
 

and some more...

Re: Rebuild of my K-10
 

and just for the record it is fully welded in. I just didnt take any pics of that or the body work.

Re: Rebuild of my K-10
 

Nice work bud. Looks good. What are your plans? Just building it as a daily driver? Show truck? Trail rig?

Re: Rebuild of my K-10
 

for now its just a toy. I drive it occasionally to work, around town, and to haul my 4 wheeler. Then sometimes on the weekends i take it out wheeling. I'm gonna have to drive it this coming winter because my other vehicles are to nice to take out in the snow and salt.

Re: Rebuild of my K-10: ..Back in Black..
 

No new progress. I did think of a name though

Re: Rebuild of my K-10
 

jott 06- Man i am really lovn that truck. Its sweet. That gas fuel door is sweet. nice touch. You got some more pics of it?

Re: Rebuild of my K-10
 

So far that is sweet. I'd do it to my truck, but Im lookin for a dually, plus my truck is too rare to "pimp it".

Re: Rebuild of my K-10
 

No real progress lately. I took a nice chunk out of the yoke on my transfer case right after christmas when my universal joint broke so the truck was down for about a month while i tried to find a used yoke for it. It is fixed now though and i've been driving it daily in all the snow we've been getting. here is a pic i took at my girlfriends. I didnt want to block the driveway so i made my own parking spot in the snow.
http://i381.photobucket.com/albums/o...bigblack-1.jpg

Re: Rebuild of my K-10
 

Nice. Its nice to see you back on here.

Re: Rebuild of my K-10
 

thanks. I'm wanting to get back to work on the truck this summer. I'm gonna try to find a door and a set of fenders this weekend at a local swap meet. Then i'm going to order rockers and cab corners at work.

Re: Rebuild of my K-10
 

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

Re: Rebuild of my K-10
 

Sorry i dont have the steps anymore. I sold all of my unused parts from both trucks to my buddy last summer because he wanted the axles for a geo tracker he was building for mud bogging and he gave up on the project and scrapped it all