1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Parting a 1971 GMC 4x4 Jimmy. I will add more pictures and parts as I begin to pull parts. Here is a short list for now. Thanks, Sharpie

Bucket seats with nice brackets. $425 shipped. SOLD

Black console SOLD

Rear seat with correct floor brackets (no clamps). $200 shipped.

Black visors and clips. SOLD

Floor levelling mat. Pictures added to post. $100 shipped. SOLD

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

more pics

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

how much do you want for the ashtray frame and mounting hardware ??

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

How about $15 shipped for frame and mounting hardware? Do you need the ashtray itself? If so, $20 shipped for the whole show. Thanks, Sharpie

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

do you have the top reinforcement brackets that bolt from the rear of the top to just above the tailgate on the body ??

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

I see in the picture you also have the factory cigarette lighter how much for that assembly including wiring

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Yes, $45 shipped for the pair. Pics attached. Thanks, Sharpie

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

I will take the whole ashtray including the tray and hardware

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

I will take those brackets as well

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

With the hardware right

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Yes, hardware included. $15 for lighter and wiring. Thanks, Sharpie

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

How much for the front and rear bumper brackets?

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Dennis- Does this truck have the shield that goes over the gas filler neck on the inside? How about a transfer case skid plate? Thanks, Ray

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

I will take it. Sounds good $80.00 total I will send payment today
So the ashtray with hardware the top brackets with hardware and the cig lighter with hardware.

Thank you

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Juicer: I'm guessing you know the front brackets are GMC specific and the rear is an aftermarket step bumper.

Hi Ray, no skid plate. I've got a nice filler neck cover. $30 shipped. How's the project coming?

Scoobydoo: PM sent

Thanks, Sharpie

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Pics of floor levelling mats.

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Hi Sharpie
Need the rear carpet hold downs front and rear also the side pieces for the tailgate seals. I see them in your pictures. How much for all? Also need the front bumper brackets and the front park light assemblys
Thank you Allen in Overton NV

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Hi Allen, Glad to see you joined the Truck Board! Great guys on here! I've got 2 sets of carpet strips, HYBRIDCHEVY71 is in line for a set and you're next. I just pulled the bucket seats today and can get you good pictures and measurements if you still need them for your floor work. Prices are as follows for the parts you are interested in:

Carpet strips: $75 for a pair
Side trims for tailgate seals: $25 pair
Front bumper brackets: $75 for all 4
Front park assemblies: $50 pair

All prices include shipping. Thanks, Sharpie

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Hi Sharpie
Would you do 200.00 shipped for all? And yes when you get a chance i do still need the measurements.
Thank you Allen

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

I will take the cover and paypal you the $$. No problem on the skid plate, but would you have an a/c battery box yet? Project has been extremely slow the last 6 weeks due to all of my kids' spring sports. I'm hoping to start moving forward more rapidly now, though. Got all floor and rocker rust fixed up. Wound up replacing the bedsides with the nos pair that I had- thought it would be easier than patching the rust holes.

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Hi Allen, $200 for all would be fine. Paypal: denscustom1@hotmail.com

Hi Ray, Haven't scored a good AC tray yet, but I'll let you know if one shows up.

Thanks, Dennis

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Windshield frame if you are cutting it up. Possibly the tail gate if it is in good shape.

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Hi Jimmy, not cutting up yet. I need to finish cleaning up the floors for pictures.
LKS DCVN has first shot at the bare tub. Thanks, Sharpie

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

No problem. I would have considered the whole thing if it wasn't so much to get it out here.

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

I'd like the front and rear strips that hold the rear carpet down if those are for sale?

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Hi Rochlow: HYBRIDCHEVY71 and GM71JIMMY are in line for the 2 sets I have. If either of them pass you're up next. Thanks, Sharpie

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Carpet strip pics for HYBRIDCHEVY71 and GM71JIMMY. Thanks, Sharpie

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

That's cool. If one falls threw or if you come acrossed some more, please let me know. Thanks

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Payment sent

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Thanks! Parts will ship tomorrow. Sharpie

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Hi Dennis,I know hybridchevy71 wants the strips.I will call and let him know he's up.

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Thanks, I know he's been waiting for some. Sharpie

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Called Hector and he will be home and get with you in and hour or so.

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Paypal payment sent. Thanks Allen

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

hey sharpei, sorry it took me a while to respond, just got home from work, i do want the carpet holdown strips and the side trim seals for the tailgate. like i said before i take them. how much do u want for the leveling mats ?please PM me. thanks sharpei.

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

almost forgot to thank 67-72junkie for the call. thanks donald!!!!!!!

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

I am assuming a 350 engine, I need the throttle cable and possibly the gas pedal assembly if price is right. That is to say I have the pedal assembly but mine is a little rusty. Would also need the specific brackets that fit this cable to the engine. The 1970 trucks have a different setup. Please send pic. Also those gauges under the dash?

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Hi Bigdon, I'll check the cable and pedal assembly. The gauges under the dash are available. I'll check the condition of those as well. Thanks, Sharpie

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Hi Dennis- Thanks for getting that cover shipped off to me. One more question for ya, though: how do the front and rear driveshafts look? Would you have a price in mind for them?

If you see Mr Wegner, tell him I said 'hey'.

Thanks,
Ray

Re: 1971 GMC Jimmy 4x4 bucket seats etc. parting
 

Is that a grommet in the door for a screw to go thru in pic. #5 & #6, if so I'd be interested in both of them