69/70 4wd gmc jimmy parts f/s
 

http://img.photobucket.com/albums/v3...h/100_3814.jpg
body is rusty good only for patches.
ft. end & rear end & 350 trans. are supose to have low miles after rebuild. trans has shift kit. supose to have 308 pois. ft & rear ends. owner before me said it ran and drove good . he bought it because it had a bb in it and that is why he goy it. it has a newer brake booster master cyl. $135.00 shipped for booster brackets,rod,master cyl,propor valve.
would like to sale ft. end and rear end together $400.00 you take off.
trans. $250.00 you take off.
205 transfercase and adapter $250.00 you take off.
i will price some of the other parts as i get them off .

Re: 69/70 4wd gmc jimmy parts f/s
 

Re: 69/70 4wd gmc jimmy parts f/s
 

interested radio and chrome carpet hold downs. If you have them..:lol:

Re: 69/70 4wd gmc jimmy parts f/s
 

Re: 69/70 4wd gmc jimmy parts f/s
 

matt i have the seats belts in another tread on the truck board . i think they are yours if not claimed by midnite by the other guy.

Re: 69/70 4wd gmc jimmy parts f/s
 

i don't think it has a radio or chrome strips.

Re: 69/70 4wd gmc jimmy parts f/s
 

Re: 69/70 4wd gmc jimmy parts f/s
 

windshield has fog gasket is bad but chrome looks good $50.00 picked up.
tailgate is fair has a couple dings and some bondo in lower inside but would be ok on a work truck $50.00.

Re: 69/70 4wd gmc jimmy parts f/s
 

Re: 69/70 4wd gmc jimmy parts f/s
 

Re: 69/70 4wd gmc jimmy parts f/s
 

Re: 69/70 4wd gmc jimmy parts f/s
 

Yes, I realized you were the same after I posted! Thanks!

Re: 69/70 4wd gmc jimmy parts f/s
 

your welcome

Re: 69/70 4wd gmc jimmy parts f/s
 

Roll Bar???

Re: 69/70 4wd gmc jimmy parts f/s
 

How about the wheels stock 16" x 6.5 6 lug?????????

Re: 69/70 4wd gmc jimmy parts f/s
 

jmac11 $150.00 but how would you get it to fla?
CORSAIR i think it has a bunch of odd ball wheels but i will look at them over the week end.

Re: 69/70 4wd gmc jimmy parts f/s
 

hi bill, how about transfer case shifter, knob,boot and ring? condition and price? thanks jimer

Re: 69/70 4wd gmc jimmy parts f/s
 

jim i will have to check it out better & get back to you . it is supose to be a little nicer weather sat. i am going to try & get some stuff off of it then. i know it's chrome but has some rust starting on it.

Re: 69/70 4wd gmc jimmy parts f/s
 

thanks bill no rush stay warm it is cold up here but no snow just ice to fall on your butt! :lol:

Re: 69/70 4wd gmc jimmy parts f/s
 

ok

Re: 69/70 4wd gmc jimmy parts f/s
 

Does the drivers side bedside have any usable patches...or is the whole thing any good by chance?

Re: 69/70 4wd gmc jimmy parts f/s
 

critter it has been flared out over the wheels. do you have a pic. of what you need?

Re: 69/70 4wd gmc jimmy parts f/s
 

critter you can see some of the flare out on pic. # 3808 on pass. side.

Re: 69/70 4wd gmc jimmy parts f/s
 

Mine is full of bondo. My main concern is the area between the wheel and the door at least from the bottom half way up (all the way to the bed rail would be nice).

The flared opening is more than likely a deal breaker for me but maybe not depending on the details. Do you know if its metal or fiberglass or??? Sorry I didn't see it earlier.

Re: 69/70 4wd gmc jimmy parts f/s
 

How much for the rear tailights quarter patch panels

Re: 69/70 4wd gmc jimmy parts f/s
 

http://img.photobucket.com/albums/v3...h/100_3809.jpg
this looks like some kind of gas can holder.

Re: 69/70 4wd gmc jimmy parts f/s
 

riddla can you post a pic. of where they need cut. how much and so on. i think i have the tail light and reverce housings sold.

Re: 69/70 4wd gmc jimmy parts f/s
 

http://img.photobucket.com/albums/v3.../DSCF06021.jpg
critter is the part i put a red line around what you need?

Re: 69/70 4wd gmc jimmy parts f/s
 

I can get you a pic but not till sunday or so, work gots me workin full days.
I would say from the rear marker light back both sides. My taillights are pushed in bad tryin to save the old gmc They dont need to be great.

Re: 69/70 4wd gmc jimmy parts f/s
 

do you need to start at rear of marker light or do you need marker lights included.

Re: 69/70 4wd gmc jimmy parts f/s
 

Yep! Is it decent?

Re: 69/70 4wd gmc jimmy parts f/s
 

RIDDLA if both sides are they look good from the rear both sides cut off and shipped to you for $125.00. let me know if you are interested .
critter i will check on the piece you need.

Re: 69/70 4wd gmc jimmy parts f/s
 

done and done bill will take from the front of the marker light

Re: 69/70 4wd gmc jimmy parts f/s
 

Is the roll bar spoken for? I am @ 23480

Re: 69/70 4wd gmc jimmy parts f/s
 

jmac11 has ask about it you are 2nd on the roll bar.

Re: 69/70 4wd gmc jimmy parts f/s
 

COOL thank you

Re: 69/70 4wd gmc jimmy parts f/s
 

i got some stuff off today but my camera is broke right now.
RIDDLA got your parts off pm sent.
critter lower half has rust let me know if you need some of the upper half.

CORSAIR wheels were odd balls.
jimer1964 transfercase shifter was nicer than i thought . it's in good driver shape boot has small cut next to shifter $100.00 shifter,boot,knob ring was not there.
gas tank spout good driver shape $40.00 shipped.
rad. metel hose piece fair driver shape $30.00 shipped.
trans.cover good driver shape $45.00 shipped.
tail gate henge set 4 pieces $25.00 shipped.
i will post pic.s when ever i get my camera fixed.

Re: 69/70 4wd gmc jimmy parts f/s
 

I guess I'll pass, the bottom is what I am really needing. Thanks though.

Re: 69/70 4wd gmc jimmy parts f/s
 

Does it have the factory hardware to hold the rear panels on? If so, I'd like it.

Also all the tailgate hardware inside the gate including the handle and rods....and all the hardware on the truck

Door guts if useable? (door latches, window channels, regulators, lock hardware/rods)

And any of the brackets to mount the top or the piece that goes on top of the door at the vent window....

And the cover for the gas fill tube if still there (behind the panels)

Price for all shipped to 23112?

Re: 69/70 4wd gmc jimmy parts f/s
 

Let Asea have it Bill..... transport near about impossible.