![]() |
Parting 67 GMC CST V6
I bought this truck for the seat and It will be the only thing I remove from the truck! Its a 1967 CST Large window Buddy bucket with a V6,power-loc rear, No PB or A/C.
I bought it from the original owner. front end, inside and everything seems to have never been removed but I cant tell for sure if the truck has been painted. The front fender, inner and core support is rust free except for the very small dent on the front fender. The gaps are great and everything closes and lines up real well. I have the protecto-plate, owners manual and other documents that I will attach the pics of it below too. I didn't sell it whole so I'm parting it out starting tomorrow. Here's a link to the for sale thread until I get pics loaded. http://67-72chevytrucks.com/vboard/c...gmc-cst&cat=12 Front passenger fender is sold! Here are a few prices. Ask about anything you see. Horn cap and all hardware...$100 shipped D/s fender $75 Inner fenders look rust free $75 for p/s $50 for d/s Hood has a dent on the leading edge $ 50 Motor and tranny $300 (didn't try to start it yet) Rear end $350 Fiberglass topper $150 Mike http://67-72chevytrucks.com/vboard/c...2/CST1_006.jpg Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device |
Re: Parting 67 GMC CST V6
What shape is the forward light wiring harness in? Jamie 71 :gmc2: Longhorn
|
Re: Parting 67 GMC CST V6
I'm interested in the armrests and the sunvisor clips if they're fawn - how much to ship to 35750?
Thanks! |
Re: Parting 67 GMC CST V6
Put me in line for the fender badges pending pics please
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
Quote:
Quote:
Quote:
There is a lot of pics in the truck for sale thread guys.ill get em posted later. Posted via Mobile Device |
Re: Parting 67 GMC CST V6
Quote:
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
I need to find out if the alternator & voltage regulator hookups for the V6 engine are the same as a small block V8. If this is true i'd like to see some pics of the harness. If not i cannot use. Thanks Jamie
|
Re: Parting 67 GMC CST V6
how about horns did it have any. both horns and harness to 34446
|
Re: Parting 67 GMC CST V6
Quote:
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
5 Attachment(s)
Here are some pics
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
3 Attachment(s)
More pics
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
2 Attachment(s)
Emblems
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
How much for the glove box door?
|
Re: Parting 67 GMC CST V6
How good are the headlight chrome buckets and how much shipped to 55020?
|
Re: Parting 67 GMC CST V6
5 Attachment(s)
Documents
|
Re: Parting 67 GMC CST V6
4 Attachment(s)
[quote=Tim Christian;6269157]How much for the glove box door?[/QUOTE
Tim, $40 shipped pics below Quote:
$35 shipped. They. Are startingcto show some rust. Pic below as well. Posted via Mobile Device |
Re: Parting 67 GMC CST V6
How much for the steering wheel? Really don't need the cap. I have a chevy. Also what kind of shape is the dash pad in?
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
Thanks for the pic, am going to keep looking for less rusty ones. Thanks anyways.
|
Re: Parting 67 GMC CST V6
1 Attachment(s)
Dash pics.
it has no tears or rips. Just a spot in the center where there is some glue from velcro or something. It will come off. $60 if your picking it up or ill get a shipping quote. mike Posted via Mobile Device |
Re: Parting 67 GMC CST V6
Quote:
Quote:
Mike Posted via Mobile Device |
Re: Parting 67 GMC CST V6
Quote:
Quote:
Quote:
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
interested in the air cleaner, ignition switch with key plus does the key match the doors locks, tail gate
|
Re: Parting 67 GMC CST V6
Does that include hinge, stop arm, Button and hardware? Also how much for radio with knobs/mounting hardware?
|
Re: Parting 67 GMC CST V6
How much for radio if still available? Thanks
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
I am willing to purchase all of the side trim if we can agree on a price and you are willing to ship it
|
Re: Parting 67 GMC CST V6
I need the door panels, a choke knob, cig lighter, and the seat belts if available.
|
Re: Parting 67 GMC CST V6
Quote:
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
Price on the radio and the choke stuff minus the knob someone asked for it already. Just need the cable and assembly to the carb. Thanks
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
I am interested in body side molding, radiator core support and tailgate. What is condition?
|
Re: Parting 67 GMC CST V6
I may have to pass on the dash pad but do you have more pictures of the steering wheel? How much to ship?
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
Quote:
$35 for the air cleaner and $20 for the locks and ignition once I make sure they all work! I'll cover anything over $15 shipping. $70 total shipped! Quote:
$40 for all of the GBD items. $50 for the radio and all hardware. I'll ship it all in a box safely packaged for shipping costs. Quote:
You are second on the radio. Quote:
Quote:
Drivers panel is lifting a little pass is great just dirty $50, choke items $30, cig lighter $10, seat belts are all there and retractors work $75. I'll get some pics tomorrow. Quote:
I'll get some better pics tomorrow of the trim. Core support is rust free so it's $125. I get better pics of the tailgate tomorrow and price it accordingly. Quote:
Understood on the dash pad. Was it overpriced? I'll charge what they charge me on the steering wheel as I have tons of peanuts and foam to pack it. Mike Posted via Mobile Device |
Re: Parting 67 GMC CST V6
Ok thanks for the reply. Shoot a few pics tomorrow and I will talk with you then.
|
Re: Parting 67 GMC CST V6
Is thr right fender good? Would you ship Greyhound? Thanks
John |
Re: Parting 67 GMC CST V6
I'll take the air cleaner.
I'll take what ever the key works. I also asked about the tail gate in post 22 I believe I was first. |
Re: Parting 67 GMC CST V6
i'm intrested in the heater controls if its in nice shape. i dont really need the cables.
is there any pitting on the chrome?(what little you see of it) are any of the levers broke?(hard too see) are the rivits holding the mech to the face plate tight?. do you know if the fan switch works? |
Re: Parting 67 GMC CST V6
I'm gonna pass on the harness. Thanks anyway.
|
Re: Parting 67 GMC CST V6
$150 on all the trim after you get better pictures of all trim. I'll charge what shipping cost ends up being.
sounds good! send the pics and a PM and I can pay via Paypal Thanks,Brett |
Re: Parting 67 GMC CST V6
Hey Mike, heres a bump for ya. Just a little reminder, if ever decide you want let go of that seat, lmk. Lol. Good luck with sale.
Posted via Mobile Device |
Re: Parting 67 GMC CST V6
ill get in line for the steering wheel and the cap also, also whats the going rate for the tail gate?
|
Re: Parting 67 GMC CST V6
Mike I gonna pass on the fender badges. Thank you
Posted via Mobile Device |
All times are GMT -4. The time now is 02:03 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com