The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Vendors Marketplace (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=195)
-   -   New Ridler 645's to be available shortly (https://67-72chevytrucks.com/vboard/showthread.php?t=603491)

ksbrktracer 11-08-2013 02:27 AM

New Ridler 645's to be available shortly
 
1 Attachment(s)
Will be available just shortly , In Chrome, Gray and Black and in 20". I have better pictures , I just cant get them loaded right now from the motel. Looks alot like the Boyds Magneto Wheel

ksbrktracer 11-12-2013 12:15 PM

Re: New Ridler 645's to be available shortly
 
2 Attachment(s)
Heres a Couple of better pictures of the new Ridler 645's .... 17's & 18's on the way , 20"s will be sometime around the first of the year. Painted versions shown and CHROME should be available also.

OARNGESI 11-14-2013 09:22 AM

Re: New Ridler 645's to be available shortly
 
how much are the 20s going to run in black and are the offered in 5x4.75

ksbrktracer 11-14-2013 04:23 PM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by OARNGESI (Post 6363181)
how much are the 20s going to run in black and are the offered in 5x4.75

They are going to build the wheel in black, gray and chrome 20" with 5on4-3/4 bp as well as 5 on4-1/2 , 5on5 and I think 5on5-1/2 ,

they should be 20X8.5 with 4.75 BS and 20X10 with 5.5 BS

20X8.5 will be $190.00 each + shpg for Black or Gray finish
20X10.0 will be $213.00 each + shpg for Black or Gray finish

20X8.5 will be $242.00 each + shpg for Chrome finish
20X10.0 will be $268.00 each + shpg for Chrome finish

Prices are estimates only right now, but I think they are Right or very close, wont know positively until they build them.

as soon as they are available in 20", approximately 1st of the year ,

there 17's in the warehouses now.
SIZES that will be available will be

17X7.0
17x8.0
18X8.0
18x9.5
20X8.5
20x10.0

DROP SHIPPING IS AVAILABLE ....... HELPS SAVE ON THE FREIGHT.

twotrucks 11-15-2013 07:12 PM

Re: New Ridler 645's to be available shortly
 
Will these backspaces work with '72 truck?

darkhorse970 11-15-2013 07:23 PM

Re: New Ridler 645's to be available shortly
 
I'd like to see the backspaces available for all sizes in 5x5.

long'n low 11-15-2013 08:00 PM

Re: New Ridler 645's to be available shortly
 
Damn where were these 8 mnths ago!

ksbrktracer 11-15-2013 08:51 PM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by twotrucks (Post 6366212)
Will these backspaces work with '72 truck?

Yes they will work on a 72 truck. If it is extremely lowered you would truly want a 5.25 or 5.5 BS for the front. They only build a 4.75 BS 20X8.5 ..... right now.

Quote:

Originally Posted by darkhorse970 (Post 6366220)
I'd like to see the backspaces available for all sizes in 5x5.

I will get those #s for you and get them posted in this thread.


Quote:

Originally Posted by long'n low (Post 6366268)
Damn where were these 8 mnths ago!


exactly what I thought when I saw them ...... They are BADASS in Person

cst69 11-17-2013 08:15 PM

Re: New Ridler 645's to be available shortly
 
Hey Tommy, glad to see you expanding. Gotta have a set of 20 x 8.5 & 20 x 10 for the 92. Does the backspace work for a 92 RCSB that is tucked on it's rails?

Anyway you can help me to unload the 695's I got from you months ago NIB? Just asking, I am sure I can sell them local here. Let me know about the backspace and when they will be available in 20" black!

Thanks, Ken

ksbrktracer 11-19-2013 11:36 AM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by cst69 (Post 6369246)
Hey Tommy, glad to see you expanding. Gotta have a set of 20 x 8.5 & 20 x 10 for the 92. Does the backspace work for a 92 RCSB that is tucked on it's rails?

I just put 20X8.5 BOSS 338 with 5.25 BS on My 93 Pace Truck. I used a 245/40/20 on the front and a 275/40/20 on the rear with a 4/6 Drop. 4.75 Backspace will not work on the front lowered. I dont know about a 10" on the back yet .... I am gonna try it , but havent done it yet


Anyway you can help me to unload the 695's I got from you months ago NIB? Just asking, I am sure I can sell them local here. Let me know about the backspace and when they will be available in 20" black!

Thanks, Ken

Freight is probably gonna make it difficult. I know they will sell on here as Those wheels are on backorder at this moment and I have people inquiring. If I get someone in your neck of the woods I will send them your way.

17X7.0 = ........
17X8.0 = ........
18X8.0 = .........4.50 BS
18X9.5 = ........ 5.25 BS
20X8.50 = ........ 4.75 BS
20X10.0 = .........5.50 BS

Im pretty sure on these BS #'s but not 100% positive yet as the wheels are still in production.... Warehouse does not have part #'s yet.

ksbrktracer 11-23-2013 01:13 AM

Re: New Ridler 645's to be available shortly
 
To the Top .........

markiemark 11-23-2013 01:28 AM

Re: New Ridler 645's to be available shortly
 
NICE!! Thanks

ksbrktracer 11-23-2013 01:30 AM

Re: New Ridler 645's to be available shortly
 
1 Attachment(s)
Another Picture

naisugai 11-26-2013 01:25 AM

Re: New Ridler 645's to be available shortly
 
Request a quote for four 18 x 8's in gray.

Thanks!

ksbrktracer 11-26-2013 10:37 AM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by naisugai (Post 6389063)
Request a quote for four 18 x 8's in gray.

Thanks!


Chrome is the only thing available right now .... Still a little bit on other finishes.
If chrome would interest you , they would run $216.00 each + shpg.

swanga c10 11-27-2013 07:52 AM

Re: New Ridler 645's to be available shortly
 
I'm interested in a set of the 20's in the staggered sizes. Please let me know once prices are confirmed and they are available.

ksbrktracer 11-27-2013 10:15 AM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by swanga c10 (Post 6390829)
I'm interested in a set of the 20's in the staggered sizes. Please let me know once prices are confirmed and they are available.

Absolutely .....!

custom97 11-27-2013 10:39 AM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by cst69 (Post 6369246)
Hey Tommy, glad to see you expanding. Gotta have a set of 20 x 8.5 & 20 x 10 for the 92. Does the backspace work for a 92 RCSB that is tucked on it's rails?

Anyway you can help me to unload the 695's I got from you months ago NIB? Just asking, I am sure I can sell them local here. Let me know about the backspace and when they will be available in 20" black!

Thanks, Ken

How much you asking for the 695's?

cst69 11-27-2013 04:58 PM

Re: New Ridler 645's to be available shortly
 
hey Custom67, the 695's are 18 x 8 & 18 x 9.5 sizes, pm me so that no one get's in any trouble here

zellway 12-09-2013 02:47 PM

Re: New Ridler 645's to be available shortly
 
Any word on gray or black? My short bed could use a set:devil: Just checking. Might have to wait till first of the year with all the other spending going on this time of year. :waah:

ksbrktracer 12-09-2013 04:24 PM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by zellway (Post 6409550)
Any word on gray or black? My short bed could use a set:devil: Just checking. Might have to wait till first of the year with all the other spending going on this time of year. :waah:

I can get chrome 18"s right now, other stuff will be after the 1st of the year at this point

knomadd 12-13-2013 01:43 PM

Re: New Ridler 645's to be available shortly
 
Please let me know if they decide to use a 5.25" backspacing on the 20x8.5 in chrome. *fingers crossed* I'd love a set of 20x8.5 and 20x10 for my 71, but I'm putting air bags on it and I want the fronts to tuck when aired out. It won't be sitting on the frame, but I'm still fairly sure a 4.75" bs won't work for my setup.

ksbrktracer 12-13-2013 06:12 PM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by knomadd (Post 6416593)
Please let me know if they decide to use a 5.25" backspacing on the 20x8.5 in chrome. *fingers crossed* I'd love a set of 20x8.5 and 20x10 for my 71, but I'm putting air bags on it and I want the fronts to tuck when aired out. It won't be sitting on the frame, but I'm still fairly sure a 4.75" bs won't work for my setup.


That was the first question I asked when I was looking at them .... I hope they make it in the 5.25 backspace too.....!

I will post up as soon as I know .... !

knomadd 12-19-2013 06:20 PM

Re: New Ridler 645's to be available shortly
 
Any news yet??? I'm getting excited...although impatient. :lol:

markiemark 12-19-2013 06:27 PM

Re: New Ridler 645's to be available shortly
 
Me too. I'm still looking at other wheels but these are my 1st choice.. 20" all around... Build these suckers already!!!

mattcrp1 12-19-2013 08:36 PM

Re: New Ridler 645's to be available shortly
 
Any pics of these mounted up?

ksbrktracer 12-20-2013 11:01 PM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by knomadd (Post 6426132)
Any news yet??? I'm getting excited...although impatient. :lol:

I talked to Ridler today ...... Nothing yet , just the Chrome 18"s so far.... They said mid to end of January hopefully


Quote:

Originally Posted by markiemark (Post 6426139)
Me too. I'm still looking at other wheels but these are my 1st choice.. 20" all around... Build these suckers already!!!

I talked to Ridler today ...... Nothing yet , just the Chrome 18"s so far.... They said mid to end of January hopefully ...... Tell me about it ...Im getting impatient also




Quote:

Originally Posted by mattcrp1 (Post 6426352)
Any pics of these mounted up?

Nothing yet ...!

loweredd 01-10-2014 11:14 PM

Re: New Ridler 645's to be available shortly
 
In for updates. :mm:

slowcpe 01-10-2014 11:22 PM

Re: New Ridler 645's to be available shortly
 
Me to. Interested in pics of trucks on 20s

mac808 01-10-2014 11:29 PM

Re: New Ridler 645's to be available shortly
 
Any 5 x 4.25 bolt patterns in 20's?

ksbrktracer 01-11-2014 04:39 PM

Re: New Ridler 645's to be available shortly
 
I talked to Ridler today and they said black and gray 645's should be available in 3 to 4 weeks. They do not offer it in 5 on 4.25 bolt pattern , that would be small Mopar .

knomadd 01-13-2014 07:09 PM

Re: New Ridler 645's to be available shortly
 
Any update on if they will be offering a Chrome 20x8.5 with 5.25" backspacing?

ksbrktracer 01-14-2014 12:23 PM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by knomadd (Post 6469216)
Any update on if they will be offering a Chrome 20x8.5 with 5.25" backspacing?


Talked to them last night ...... NO 5.25 Bs 20X8.5 unfortunately. Only 4.75 at this time.

markiemark 01-14-2014 12:52 PM

Re: New Ridler 645's to be available shortly
 
are 20" available now?

ksbrktracer 01-16-2014 12:32 AM

Re: New Ridler 645's to be available shortly
 
My understanding is in about 3 weeks or so for black and gray , I believe chrome may be available in limited quanities now tho.

markiemark 01-16-2014 12:55 AM

Re: New Ridler 645's to be available shortly
 
find out on the chrome set of staggered 20" and get back to me... thanks

ksbrktracer 01-16-2014 12:57 AM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by markiemark (Post 6473671)
find out on the chrome set of staggered 20" and get back to me... thanks

It will be tomorrow as I have no way of checking warehouse inventory tonight , but I will let you know....... !

By the way I can now Dropship from them ..... Definitely helps on freight costs .. !

ksbrktracer 01-17-2014 12:01 AM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by markiemark (Post 6470525)
are 20" available now?

Yes They are available in chrome and I can have them dropshipped .

20X8.50 = $242.00 ea. + shpg 4.75 BS
20X10.0 = $268.00 ea. + shpg 5.50 BS

PM sent as well.

72Blazing 01-17-2014 11:47 AM

Re: New Ridler 645's to be available shortly
 
Price and availalability shipped to 78501 on 4 18x9.5 grey
Thanks

ksbrktracer 01-17-2014 05:53 PM

Re: New Ridler 645's to be available shortly
 
Quote:

Originally Posted by 72Blazing (Post 6475985)
Price and availalability shipped to 78501 on 4 18x9.5 grey
Thanks

Wheels would run $169.05 ea + $120.00 shpg. , Ball park time frame about 2 weeks. There are 30 wheels on there way to the warehouse in California right now , but I have no idea how long they will be there before they are sold out. I can pre sell them before they get there so there are 4 for you if you are interested.


All times are GMT -4. The time now is 04:11 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com