HD Carrier Bearing Mount
3 Attachment(s)
I will be making more of these in the future but as of now I have just this one. If you currently have the light duty driveshaft and carrier bearing that hangs from the top of the trailing arm crossmember and you want to upgrade to the HD driveshaft and carrier bearing, you will need this bracket. This mount bolts to the bottom of the trailing arm crossmember and the carrier bearing bolts to it.
The mount I am selling is shown in the first two pics. The rusty one in the third pic is an original mount. The price on this new mount is $47.50 plus shipping of $9.20.This pricing is always current and up to date. As always, I will combine shipping when you purchase two or more of my products. To make a purchase, post in this thread, send me a PM or send an email to captainfab454@hotmail.com, and I will give you the ordering and payment instructions and current lead time. |
Re: HD Carrier Bearing Mount
Will this work for the regular 70 c10 U-shaped carrier bearing?
|
Re: HD Carrier Bearing Mount
If you are referring to the HD carrier braring, yes it will work, That is what this mount is made for, the '63-'72 HD carrier bearing.
Quote:
|
Re: HD Carrier Bearing Mount
are you still selling these?
|
Re: HD Carrier Bearing Mount
I have only 1 of these right now.
I am hoping to make more, but that depends on the interest in them. Quote:
|
Re: HD Carrier Bearing Mount
Sorry I'm a noob.
Does it line up for this part? for the hole to hole measurement? http://www.oreillyauto.com/site/c/de...upport+bearing |
Re: HD Carrier Bearing Mount
Yes it should. My mount is a duplicate of the original mount.
|
Re: HD Carrier Bearing Mount
sweet! that's what I need
|
Re: HD Carrier Bearing Mount
I'll send you a PM with payment info.
Quote:
|
Re: HD Carrier Bearing Mount
I'm definitely interested in one if this is still available.
|
Re: HD Carrier Bearing Mount
This one is sold to 66 C10 383.
I guess I'll see about making up some more. |
Re: HD Carrier Bearing Mount
I do have more of these available. They are $35.00 plus $5.50 for shipping.
Here are a couple pics of the HD driveshaft for those not familar with how it compares to the light duty driveshaft assembly. The front half: http://www.67-72chevytrucks.com/vboa...8&d=1287637415 The rear half: http://www.67-72chevytrucks.com/vboa...7&d=1287637415 |
Re: HD Carrier Bearing Mount
Is that rear shaft a slip shaft? Going to have to inspect my C-20 to see if I have the HD bearing in there...
|
Re: HD Carrier Bearing Mount
Hmmm ok I don't have the HD bearing. I don't see how this bracket would work for me though -- the support bearing hangs down on the backside of the crossmember while this one would mount to the front side -- I'd need new driveshafts to make this work for me, correct?
|
Re: HD Carrier Bearing Mount
Quote:
|
Re: HD Carrier Bearing Mount
Captain
Do you still make/have any of these brackets? I may need one. Not sure yet if its going to work with my crossmember though. My 3/4 - 1/2 ton conversion is fighting me at every turn. I thought I did all the research before I bought the new drop xmember and coil spring set up, but I did not at that time know about the different carrier bearings and drive shaft combos. Basically if I could find the 1/2 ton HD carrier bearing with the 1.378" ID bearing that would be great and would work perfectly with the parts I already have. But I have found nothing like that. My thought is that I could use your bracket but bent the tabs back down to flat, then drill holes in my xmember. My xmember is flat on the bottom side, unlike the stock one. |
Re: HD Carrier Bearing Mount
Yes I still make these carrier bearing mounts as well as all of my other products.
I can weld the mounting tabs on, flat instead of angled to fit the original crossmember. I was not aware of a difference in the HD carrier bearing between the C10 and C20's. |
Re: HD Carrier Bearing Mount
You might PM or email me the center to center dimension of your carrier bearing mounting bracket. I will check it against my mounting bracket.
|
Re: HD Carrier Bearing Mount
Quote:
I'm going to do some more thinking, but I may take you up on your offer to make a bracket with the tabs welded on flat. I'm trying to avoid drilling into my new powder coated crossmember if at all possible. This is a temporary solution to get the truck mobile. I am moving to Alabama soon and the relo company will only transport the truck running and driving, otherwise it's my responsibility and expense. When I do the engine/trans swap I will obviously have to buy a new driveshaft. |
Re: HD Carrier Bearing Mount
I will be on vacation from 08-08-16 thru 08-25-16. If you wish to make a purchase you can post here in this for sale thread, send me a PM or an email to captainfab454@hotmail.com. I will reply to your inquiry when I return on the 25th. I do currently have a list of orders to build and ship when I return but I will add your name to the list in order of when received. Thanks for your understanding.
|
Re: HD Carrier Bearing Mount
Are these still for sale? I need one ASAP. Thanks,
Rob |
Re: HD Carrier Bearing Mount
All of my products are for sale everyday. I replied to your email earlier today.
Quote:
|
Re: HD Carrier Bearing Mount
Quote:
|
Re: HD Carrier Bearing Mount
Payment received......thanks
Quote:
|
Re: HD Carrier Bearing Mount
I am officially notifying everyone that I will be on vacation from 02-05-18 thru 02-13-18. I will do my best to get all orders built and shipped before I leave, if placed by 01-31-18. Orders placed while I am gone will be built and shipped in order of receipt of payment once I return. Thanks for understanding.
|
Re: HD Carrier Bearing Mount
Enjoy your time off.
Jimmy |
Re: HD Carrier Bearing Mount
Thanks, I'm gonna try.
Quote:
|
Re: HD Carrier Bearing Mount
Hey John,
Do you have one of these ready to go? Thanks |
Re: HD Carrier Bearing Mount
No I do not have any welded up and ready to go. It will be a couple days with the current orders I have ahead of you.
|
Re: HD Carrier Bearing Mount
Quote:
|
Re: HD Carrier Bearing Mount
OK, I'll get one welded up and let you know.
|
Re: HD Carrier Bearing Mount
Quote:
|
Re: HD Carrier Bearing Mount
I have one welded up for you. I will send you a PM with payment instructions.
|
Re: HD Carrier Bearing Mount
Quote:
Thank you! |
Re: HD Carrier Bearing Mount
Payment received. Thank you :)
|
Re: HD Carrier Bearing Mount
I received it yesterday, Thank you!
|
Re: HD Carrier Bearing Mount
John, I will take one of these. Thanks
|
Re: HD Carrier Bearing Mount
I'll send you a PM with ordering and payment info..
Quote:
|
Re: HD Carrier Bearing Mount
Quote:
|
Re: HD Carrier Bearing Mount
Payment received and order shipped.
|
All times are GMT -4. The time now is 10:46 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com