72 Cheyenne K10 SWB Numbers Matching
2 Attachment(s)
Was after this truck from the original owner's widow for 16 years. He died in 1989. She drove it a little bit in the winters. It was a farm truck and even had a stock rack for hauling cattle on it. My sons and I are the builders. We have built many cars and trucks together.
Attachment 1340724 Attachment 1340725 |
Re: 72 Cheyenne K10 SWB Numbers Matching
1 Attachment(s)
Inside bed picture. The truck had 43,444 original miles on it before the restoration started. Bought it in early October 2013. We only have a month or two in the winters to build them, but were about 7/8 done with it now.
[ATTACH]1340727[/ATTACH |
Re: 72 Cheyenne K10 SWB Numbers Matching
1 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
1 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
1 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
1 Attachment(s)
The truck was bought new in Reno Nevada. They moved to Idaho in 1983. The rust issues we dealt with were the rear cab corners, rear cab mounts, both door bottoms and the hardest one was below the rear sliding glass window. Went to a local junk yard and they ruined a cab for $35.
Attachment 1340756 |
Re: 72 Cheyenne K10 SWB Numbers Matching
1 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
1 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
1 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
1 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
The truck will be updated and driven daily. It will pull the planes out of the hanger every morning.
Updates include powder coated frame and various other body parts. 4" lift with custom built springs from Alcan. The back set have a little over 4" to prevent rear droop. Also moved the center pin back 1" for better rear wheel to fender lip alignment. Stroked and bored the engine to a 383 ci. Good thing I overhauled the engine, the old steel head gasket were letting water seep into the cylinders from all the sitting around. Used a new stoker crank and rods. Bumped the compression up to 9.2 and install a torquer cam. Also installed Pertonix Igniter II in the distbutor. Building the engines is my favorite part. Install a tach dash from Tom TBONE1964. Installed a tilt steering column Kevin Kevs Classics Retro Sound stereo with blue tooth, Retro sound in dash speaker (they say use the 5x7 for A/C pickups. We did it, but won't again. We'll use the 4x10 next time) Alpine 4" in upper cab corner and 2 Alpine 8" subs with built in amps under the seat. Running the old 15x10 Mickey Thompson Challenger wheels with the M/T Baja MTZ 33x12.5R15 tires. |
Re: 72 Cheyenne K10 SWB Numbers Matching
2 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
2 Attachment(s)
Powder coated frame with Inline tube SS brake and fuel lines. Have had a lot of leaking issues with this set of line. Inline tube has been good to work with, but slow with result. In the past we've never had an issue with their stainless steel lines.
Attachment 1340823 Attachment 1340824 |
Re: 72 Cheyenne K10 SWB Numbers Matching
Nice SWB 4x4 Cheyenne !!!! You don't find those every day, nice find !
Gary |
Re: 72 Cheyenne K10 SWB Numbers Matching
Nice! Looking good. Greetings from Montana. I'm on board for the build.
|
Re: 72 Cheyenne K10 SWB Numbers Matching
Quote:
Quote:
The pictures will keep coming quick with the short time frame to get it done. |
Re: 72 Cheyenne K10 SWB Numbers Matching
2 Attachment(s)
American Autowire classic update kit. We usually use these kits in all our builds, including LS and Electronic transmission vehicles. Use their Highway series in hotrods. On the K10 used the AAW Classic Update kit with a non anti diesel original wiring harness on the A/C system.
Attachment 1340830 Attachment 1340831 |
Re: 72 Cheyenne K10 SWB Numbers Matching
I'll be watching this build. Looks great so far.
|
Re: 72 Cheyenne K10 SWB Numbers Matching
3 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
4 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
4 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
5 Attachment(s)
Transfer Case with all new seals and gaskets.
It looked great inside. Used old Chevy Red/Orange colored paint which is darker/deeper than regular Chevy Orange like on the engine. Hard to see the difference in the pictures. In person it's easy to see and looks real nice. Attachment 1340848 Attachment 1340849 Attachment 1340850 Attachment 1340851 Attachment 1340852 |
Re: 72 Cheyenne K10 SWB Numbers Matching
nice truck , ive subscribed to your build , looks killer
|
Re: 72 Cheyenne K10 SWB Numbers Matching
5 Attachment(s)
More Cab Progress:
Attachment 1340877 Attachment 1340878 Attachment 1340879 Attachment 1340880 Attachment 1340881 |
Re: 72 Cheyenne K10 SWB Numbers Matching
3 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
2 Attachment(s)
The A/C evaporation box before my son Clay restored it. He only changed the fan and expansion valve. Then cleaned, polished and clear-coated it. Sent the POA valve to Benny Sanchez in Texas for a R134 calibration.
Attachment 1340891 Attachment 1340892 |
Re: 72 Cheyenne K10 SWB Numbers Matching
Greetings neighbor! Great job on your pickup! One of my favorite two tone combos. Love what you did with the engine, looks fantastic.
|
Re: 72 Cheyenne K10 SWB Numbers Matching
Quote:
|
Re: 72 Cheyenne K10 SWB Numbers Matching
5 Attachment(s)
Frame and drive train marriage. Last picture is son Clay (1) and Grandsons Evyn and Jaxon (3&4). The shop looks like a bomb went off in it.
Attachment 1340897 Attachment 1340898 Attachment 1340899 Attachment 1340900 Attachment 1340901 |
Re: 72 Cheyenne K10 SWB Numbers Matching
I put a 2" tuff country lift with 33's on my K10 but after seeing the pic in your avatar I almost wish I went with the 4" like yours, looks great!
|
Re: 72 Cheyenne K10 SWB Numbers Matching
5 Attachment(s)
Cab, Radiator support and ECE hidden hitch installed on frame.
Attachment 1340903 Attachment 1340904 Attachment 1340905 Attachment 1340906 Attachment 1340907 |
Re: 72 Cheyenne K10 SWB Numbers Matching
Quote:
Glad I did, it looks even better in person. |
Re: 72 Cheyenne K10 SWB Numbers Matching
5 Attachment(s)
My son Cole's (4) great job of factory appearing wire layout pictures.
Attachment 1340919 Attachment 1340920 Attachment 1340921 Attachment 1340922 Attachment 1340923 |
Re: 72 Cheyenne K10 SWB Numbers Matching
Beautiful Truck!!! I have a 2wd Custom Camper in the same color I think it's the best color combo! I'm subscribed!!!
|
Re: 72 Cheyenne K10 SWB Numbers Matching
Quote:
Looked for pictures of your pickup, but didn't find any. |
Re: 72 Cheyenne K10 SWB Numbers Matching
5 Attachment(s)
|
Re: 72 Cheyenne K10 SWB Numbers Matching
I see in post #11 you mentioned you would use a 4x10 over the 5x7 speaker the next time. What was the reason exactly?
|
Re: 72 Cheyenne K10 SWB Numbers Matching
Quote:
|
Re: 72 Cheyenne K10 SWB Numbers Matching
Your build is coming along very nice, great attention to detail!
Wish I had your shop to work in, I'm working in a single stall under my house.... "LOL" Gary |
Re: 72 Cheyenne K10 SWB Numbers Matching
Quote:
http://67-72chevytrucks.com/gallery/...per-N-Boat.jpg http://67-72chevytrucks.com/gallery/...72_Chevy_1.jpg http://67-72chevytrucks.com/gallery/...72_Chevy_2.jpg http://67-72chevytrucks.com/gallery/...-Front-End.jpg http://67-72chevytrucks.com/gallery/...uck-Engine.jpg |
All times are GMT -4. The time now is 03:38 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com