66' c60 Parts for sale
1 Attachment(s)
I am not normally over on this side but i have come across a 66' C60 that i am going to part out. Where would be the best place on here to list it? seems like it would be odd man out listing it in the 60-66 section since it is a 60 series. Most of the metal is pretty rusty but didnt know if there were some parts some of you may need. It has a small block with manual and 2 speed rear. The truck was driven to its current spot about 10 years ago and parked.
Thanks Richard |
Re: 66' c60 Parts for sale
Since there's no Heavy Haulers parts for sale section, this seems like the best spot. I changed your title to add the words "parts for sale"
Good luck. |
Re: 66' c60 Parts for sale
Thank You Bill. Just wanted to make sure I was doing it correctly before getting in trouble :lol:
|
Re: 66' c60 Parts for sale
5 Attachment(s)
Here are some more pictures of the truck. I only have a short time to get off the parts anyone might need before I have to turn it over to the scrapyard. The bottoms of the doors are somewhat rusty but they open and close real nice. Hood is toast cab has major rust over the windshield. Bench seat folds forward.
Just so I don't break rules horn button $10 plus shipping steering wheel $40 plus shipping See anything else just ask. Nothing has been taken off the truck as of yet so everything is pending I can get it removed without damage. Richard |
Re: 66' c60 Parts for sale
1 Attachment(s)
another pic
|
Re: 66' c60 Parts for sale
The grille is sale-able. I don't want or need it (I have one) but I know you can sell it.
Don't let it go to the scrapyard. Greg. |
Re: 66' c60 Parts for sale
I agree on the grille.
Had one from a C50 and it shipped to NY state. |
Re: 66' c60 Parts for sale
I would be interested in:
Grill Radiator shroud emergency flasher upper radiator hose C60 emblems Trans hump if high one shipped to 37843 |
Re: 66' c60 Parts for sale
I will start pulling this apart in the morning and get pictures and will post prices at that time. Thanks
|
Re: 66' c60 Parts for sale
I could have used the top had it not had the same rust over the windshield. How are those fenders? If they aren't all ate up they will be wanted by someone. Same with running boards, for that matter. What engine does it have?
|
Re: 66' c60 Parts for sale
Tim
The roof is bad toast inside and out. The fenders have some dents in them but "appear" to be rust free as well as the running boards. Hoping to get time tomorrow afternoon to get them pulled off along with front bumper. The engine does not appear orignal. The breather top has a 350 270 hp sticker on it with a quadrajet 4 bbl. I pulled carb and breather off today when I pulled the upper radiator pipe. It also has a lower radiator pipe that I am going to remove once I get something to catch the antifreeze. |
Re: 66' c60 Parts for sale
Dpowers
I got the grill, flasher,C60 emblems, &upper pipe removed today but had to leave before I could get everything cataloged and pics taken The fan shroud has a large break all across the top so I doubt you would want it. Do you need the lower radiator pipe as well? The transmission hump appears to bolt on but is flat with the floor. I will try to have pics and prices to u tomorrow including shipping. Thanks Richard |
Re: 66' c60 Parts for sale
Sounds great
Quote:
|
Re: 66' c60 Parts for sale
I had a blue one but befor i went to pick it up some one destroyed it broke every peace of glass in the truck filled the motor with water.
the truck sat in a field behind the guys house no one touched it for 8 years then when i start making payments to it and done the day i show up with a tow truck.My heart was broken i still towed it home got the water out got the engine to run but not very good.I like to fine one more to rebuild and put a Alison 8 speed trans in and have the 2 speed splitter disc brake front end and run one of them 6.1 new fuel injected motors in it and make it a roll back tow truck |
Re: 66' c60 Parts for sale
Quote:
Sent you an email this morning with pictures. Had trouble loading them so let me know if you did not get them. Thanks Richard |
Re: 66' c60 Parts for sale
Got them and email returned.
|
Re: 66' c60 Parts for sale
Quote:
|
Re: 66' c60 Parts for sale
Quote:
richard2717, you might want to start a new thread over there. |
Re: 66' c60 Parts for sale
thanks I will keep it in mind once I get pulled off what I can before the scrapper shows up.
|
Re: 66' c60 Parts for sale
Dwane
I sent you another email with better pictures of the high hump for clarification |
Re: 66' c60 Parts for sale
Quote:
Do you think it is worth pulling the inner fenders along with the outers or just the outers? Richard |
Re: 66' c60 Parts for sale
email returned.
|
Re: 66' c60 Parts for sale
C60 emblems
Metal radiator hoses emergency flasher all sold to Dpowers Will box up today and ship either today or in the morning thanks Richard |
Re: 66' c60 Parts for sale
Dwane
I guess I missed UPS cutoff time for pickup unless they are running late. If they dont get it today they will grab it tomorrow. Will send PM with tracking info. Richard |
Re: 66' c60 Parts for sale
Richard I am interested in the cluster, the knobs for the switches, Better pics of the radio, wiper arms and is the door glass soft ray? There is a lot on that truck that fits a C10. I would pull the seat, that entire front end with the running boards and the doors. They are not to bad for east coast doors. All will sell and to nice for the scrapper.
Jimmy |
Re: 66' c60 Parts for sale
Jimmy,
I will be trying to get more pulled off of it tomorrow. I tried to get the cluster out the other day with no luck. Am I to assume I have to pull all the switches and ignition out before it will come out? I could not get the bezel to unscrew on the ignition and did not want to tear it up. I will put you 1st in line for the items you mentioned. The door glass is no good as some clown used it for target practice, I am pretty sure it was not soft ray anyway. Richard |
Re: 66' c60 Parts for sale
If you pull all the other switches speedometer cable and the choke cable it may roll out. You may have to bend down the dash some at the bottom as the sheet metal will catch on the bezel. Some PB blaster and channel locks may get the ignition switch out.
Jimmy |
Re: 66' c60 Parts for sale
Did the grill sell? If not, what's the condition? Also if you can, price shipped to 15126.
Thanks. |
Re: 66' c60 Parts for sale
5 Attachment(s)
Quote:
The main grill has some surface rust but no pitting that I can see. The mounting brackets on the back side that are riveted on would need some attention. One side the rivets are gone and there is some minor pitting and break thru on the brackets. I have tried to show this in the attached pictures. I also tossed the bezels in my little blast cabinet and there was a bad spot on the bottom of each one. If it still interests you I would take $130 shipped to 15126 for grill, bezels and uncut harness. Richard |
Re: 66' c60 Parts for sale
1 Attachment(s)
one more picture
|
Re: 66' c60 Parts for sale
5 Attachment(s)
Also had a request for better pictures of the roof clearance lights. 4dranch has 1st refusal on these at $40 shipped
|
Re: 66' c60 Parts for sale
How are the fenders and if they are good how much?
|
Re: 66' c60 Parts for sale
3 Attachment(s)
Quote:
|
Re: 66' c60 Parts for sale
3 Attachment(s)
Quote:
I am pretty sure radio not original. The wiper arms and heads appear stainless but the tension spring is gone in one of them. Gotta clean them up a bit and will post pics of them. Richard |
Re: 66' c60 Parts for sale
Richard the radio is a later model. Was hoping for 64 to 66 knobs. If you pull the three things in the pic and the speedo cable the cluster may come out. The wiring plugs in about center of the cluster and may be clipped to the pedal bracket. Unplugging it helps roll the cluster out.
Jimmy |
Re: 66' c60 Parts for sale
Are the cab clearance lights sold?
|
Re: 66' c60 Parts for sale
Quote:
Richard |
Re: 66' c60 Parts for sale
Thanks for the pics and info on the grill. It's a bit rougher than I'd like unfortunately. So I'm going to pass.
|
Re: 66' c60 Parts for sale
Quote:
|
Re: 66' c60 Parts for sale
Quote:
You are up on the clearance lights. Have had no response from 4dranch Richard |
All times are GMT -4. The time now is 01:45 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com