Parting out 2005 Silverado
 

Hi all,
Recently came across a rolled 2005 Silverado that I snuck the engine, trans, and transfer case off of, as well as the radiator, fans, ac condenser, and wheels/tires. I figured I'd see if anyone needs anything off it. Interior is still good, as are the axles. Headlights, taillights, park lights, etc etc are still there. Just PM me or reply in this thread, I'll try to stay on top of it as best I can. Forum rules state a price is needed, but listing every single part available would be hard plus I'd still forget things people want. I'll say for $1500 you can have the whole pickup or make an offer on any parts you need. Located in Platte, SD 57369

Thanks!

Re: Parting out 2005 Silverado
 

hows the driveshaft and xfer case crossmember?

Re: Parting out 2005 Silverado
 

Both are good, the vehicle drove just fine before I pulled the drivetrain. Measure your shafts and I'll double check that mine are the same.

Re: Parting out 2005 Silverado
 

just need the rear. ill get you measurements tonight.

Re: Parting out 2005 Silverado
 

My driveshaft lengths are ~67 3/4 rear and ~29 5/8 front, measuring from center of u-joint cap to center of u-joint cap.

Re: Parting out 2005 Silverado
 

its too long. crap.. ok man thanks anyways. can i get a pic of the xfer case crossmember?

Re: Parting out 2005 Silverado
 

Gone right now, I will take a picture as soon as I get back on Sunday.

Re: Parting out 2005 Silverado
 

Does this truck have fog lamps under the front bumper?
If so I need a good complete wiring harness for them.

Re: Parting out 2005 Silverado
 

Yes it does. I believe it is part of the front lighting harness. Do you want the whole harness or do you want me to cut a chunk out?

Re: Parting out 2005 Silverado
 

I would prefer to have an un-cut harness.
I thought it could be unplugged from the under hood fuse box.
Definitely interested.
Price shipped to 65251?

Re: Parting out 2005 Silverado
 

Pm sent!

Re: Parting out 2005 Silverado
 

Didn't get your PM,...

Re: Parting out 2005 Silverado
 

Oops, check now!

Re: Parting out 2005 Silverado
 

Interested in the exterior driver side rear door handle. Condition? Price shipped to 17044? Thanks

Re: Parting out 2005 Silverado
 

Pm sent!

Re: Parting out 2005 Silverado
 

Money sent for front lighting harness.
Thank you.

Re: Parting out 2005 Silverado
 

Thank you! Will ship tomorrow, as long as I can find a good box at the shop.

Re: Parting out 2005 Silverado
 

All PM's should be replied to, let me know I missed you!

Re: Parting out 2005 Silverado
 

I've been disassembling, here is some pictures of what's available. I haven't spent any time cleaning the parts, so if you are interested but want to see how it cleans up, let me know and I'll hook you up.

Transfer Case Module, Body Module, XM receiver w/antennae, CD player, air bags, steering wheel w/controls, steering column, floor mats, almost all plastic trim, HVAC box (dual zone), HVAC controls, 4x4 button, fog light button, instrument cluster, fuse block, junction block, trailer brake adapter, headlight switch, hood release w/latch, e-brake release, wiper arms, overhead cubby, door sills, entire dash harness, etc etc...

http://s160.photobucket.com/user/ant...muw56.jpg.html

http://i160.photobucket.com/albums/t...ps9c4qwfza.jpg

http://i160.photobucket.com/albums/t...ps4loofwdz.jpg

http://i160.photobucket.com/albums/t...pse1drc0hq.jpg

http://i160.photobucket.com/albums/t...psjh9donz6.jpg

http://i160.photobucket.com/albums/t...psnqxszg7e.jpg

http://i160.photobucket.com/albums/t...psgsgv4ths.jpg

Re: Parting out 2005 Silverado
 

Re: Parting out 2005 Silverado
 

http://i160.photobucket.com/albums/t...psgxhamuu3.jpg

http://i160.photobucket.com/albums/t...psxdxbsox5.jpg

Re: Parting out 2005 Silverado
 

Parts for power window conversion

http://i160.photobucket.com/albums/t...psytw7tcjr.jpg

http://i160.photobucket.com/albums/t...psnaymjbsh.jpg

Re: Parting out 2005 Silverado
 

How much for power window conversion stuff

Re: Parting out 2005 Silverado
 

$300+ shipping for regulator, motor, switch, panel, and door wiring, both sides. Also have power locks available if needed.

Re: Parting out 2005 Silverado
 

Picture 9f radio please

Re: Parting out 2005 Silverado
 

I will post a pic tomorrow, on the road again

Re: Parting out 2005 Silverado
 

http://i160.photobucket.com/albums/t...psljjikbun.jpg
http://i160.photobucket.com/albums/t...psbqacr0ko.jpg

Re: Parting out 2005 Silverado
 

Okay thanks its a diffent style then what i have in my 02 sorry for wasting your time

Re: Parting out 2005 Silverado
 

No waste, someone else may want it.

Re: Parting out 2005 Silverado
 

how much for the complete cab? wish had seen this before took it apart.

Re: Parting out 2005 Silverado
 

Complete interior and doors and everything? It has been rolled...

Re: Parting out 2005 Silverado
 

yes complete, didn't see it was rolled how bad is it, can't see the left the left side?

Re: Parting out 2005 Silverado
 

Re: Parting out 2005 Silverado
 

thats not that bad.still interested.

Re: Parting out 2005 Silverado
 

PM sent

Re: Parting out 2005 Silverado
 

Do you have any idea if the radio works? If so, what price with shipping to 65202 zip code? Thanks!

Re: Parting out 2005 Silverado
 

Yes, it did work. $50

Re: Parting out 2005 Silverado
 

Is that radio and shipping total $50, if so I will take it. PM payment info. Thanks

Re: Parting out 2005 Silverado
 

Total, will PM.

Re: Parting out 2005 Silverado
 

do you have the plastic pieces that go around the bottom of the drivers seat that covers the tracks, the light lenses in the door panels, and the speaker covers in the front door panels. thanks richie