The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   Blazer and Suburban Stuff (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=199)
-   -   MD Blazer visor hardware (https://67-72chevytrucks.com/vboard/showthread.php?t=757203)

richard2717 02-15-2018 09:01 PM

Blazer visor hardware
 
5 Attachment(s)
Nov. 1st 2019 just got in 20 more sets still same price




I have purchased enough hardware to make up 10 complete sets. If it goes well I will get more if the demand is there. They are not 100% correct but are the closest to original I have seen so far. You have to buy a minimum and not everyone is going to want to do that.



The sets consist of

(4) of the 5/16-18 x 1" stainless oval head screws the originals were 7/8" long but these work fine without bottoming out. The head diameter on them is also a touch smaller but have been tested and work fine

(2) stainless 5/16-18 x 2.5" hex head screws with stainless lock washers

1st class shipping in padded envelope up to 3 sets small flat rate for 4 or more

1 set including shipping and PP fees $17.50

2 sets including shipping & PP fees $30.50

3 sets including shipping & PP fees $39.50



The next to last picture shows original screw on the right and new screw on the left.

The last picture shows recommendation from the supplier



My PP is in my signature. Make sure your address is included and what you are purchasing please.

Edit 2.16.18 1st batch sold out. Have enough for 30 more sets will be here early next week

30 sets showed up today 2-22-18 5 sets already sold have 25 sets left


.

jondancer 02-15-2018 10:05 PM

Re: Blazer visor hardware
 
Nice , I'll be ordering soon

tmontg01 02-16-2018 01:05 AM

Re: Blazer visor hardware
 
I'll take 2 sets, thanks Richard!

Harold Holbrook 02-16-2018 06:41 AM

Re: Blazer visor hardware
 
I'll take 1 sets, thanks Richard!

rsavage 02-16-2018 07:24 AM

Re: Blazer visor hardware
 
I'll take a set Richard.

Paypal payment sent.

richard2717 02-16-2018 07:52 AM

Re: Blazer visor hardware
 
Quote:

Originally Posted by tmontg01 (Post 8189303)
I'll take 2 sets, thanks Richard!

Quote:

Originally Posted by rsavage (Post 8189339)
I'll take a set Richard.

Paypal payment sent.

Got your payments, they will both ship today.

Thanks
Richard

richard2717 02-16-2018 07:53 AM

Re: Blazer visor hardware
 
Quote:

Originally Posted by Harold Holbrook (Post 8189334)
I'll take 1 sets, thanks Richard!

I will pull a set to side pending payment

Thanks
Richard

mortoyz 02-16-2018 08:08 AM

Re: Blazer visor hardware
 
PP sent. Thanks

richard2717 02-16-2018 08:14 AM

Re: Blazer visor hardware
 
Quote:

Originally Posted by mortoyz (Post 8189359)
PP sent. Thanks

Got your payment they will ship this morning

thanks
Richard

richard2717 02-16-2018 08:15 AM

Re: Blazer visor hardware
 
5 sets left in 1st batch

GSD Guy 02-16-2018 09:34 AM

Re: Blazer visor hardware
 
I will take one set please, PP sent.

Thanks,
Kyle

richard2717 02-16-2018 09:40 AM

Re: Blazer visor hardware
 
Quote:

Originally Posted by GSD Guy (Post 8189399)
I will take one set please, PP sent.

Thanks,
Kyle

They will ship this morning
Thanks

Rawhedrex 02-16-2018 10:31 AM

Re: Blazer visor hardware
 
I will take 1 set. PayPal Sent! Thanks!

richard2717 02-16-2018 10:49 AM

Re: Blazer visor hardware
 
Quote:

Originally Posted by Rawhedrex (Post 8189431)
I will take 1 set. PayPal Sent! Thanks!

They will ship this morning
Thanks

a1vintage69 02-16-2018 11:20 AM

Re: Blazer visor hardware
 
Richard, I will take just one set for now, I ALSO still need one extra screw. Can you throw one in for a couple bucks extra?.Please let me know before I pay you. I have some original bolts coming from BLT-NT-BOT. thanks, a1

richard2717 02-16-2018 11:24 AM

Re: Blazer visor hardware
 
Quote:

Originally Posted by a1vintage69 (Post 8189464)
Richard, I will take just one set for now, I ALSO still need one extra screw. Can you throw one in for a couple bucks extra?.Please let me know before I pay you. I have some original bolts coming from BLT-NT-BOT. thanks, a1

Are you saying you do not need the hex head bolts and just need the phillips, or you want a complete set plus one screw? if you need the set plus one just add a buck or so.

Thanks
Richard

Schredder83 02-16-2018 11:30 AM

Re: Blazer visor hardware
 
Richard I will take 1 set please. Paypal sent. Thanks!

a1vintage69 02-16-2018 11:30 AM

Re: Blazer visor hardware
 
Quote:

Originally Posted by richard2717 (Post 8189468)
Are you saying you do not need the hex head bolts and just need the phillips, or you want a complete set plus one screw? if you need the set plus one just add a buck or so.

Thanks
Richard

i will take a full set a and one screw.

richard2717 02-16-2018 11:58 AM

Re: Blazer visor hardware
 
Quote:

Originally Posted by Schredder83 (Post 8189472)
Richard I will take 1 set please. Paypal sent. Thanks!

Got it they will ship in the morning

Quote:

Originally Posted by a1vintage69 (Post 8189473)
i will take a full set a and one screw.

pm sent

Payment received will ship in the morning

richard2717 02-16-2018 12:18 PM

Re: Blazer visor hardware
 
I have enough here for one more set. I just ordered more but it will be a few days b4 they come in.

Harold Holbrook 02-16-2018 04:03 PM

Re: Blazer visor hardware
 
Sent PP

richard2717 02-16-2018 04:39 PM

Re: Blazer visor hardware
 
Quote:

Originally Posted by Harold Holbrook (Post 8189659)
Sent PP

Got it. They will ship in the morning

thanks

BLT-NT-BOT 02-16-2018 06:21 PM

Re: Blazer visor hardware
 
I will take a set if you still have one.

Jothan

richard2717 02-16-2018 06:24 PM

Re: Blazer visor hardware
 
Quote:

Originally Posted by BLT-NT-BOT (Post 8189746)
I will take a set if you still have one.

Jothan

Yep one set left.

I have more on the way though and should be here next week.

PP in my sig.
Thanks

BLT-NT-BOT 02-16-2018 09:12 PM

Re: Blazer visor hardware
 
Quote:

Originally Posted by richard2717 (Post 8189748)
Yep one set left.

I have more on the way though and should be here next week.

PP in my sig.
Thanks

PayPal sent

richard2717 02-16-2018 10:56 PM

Re: Blazer visor hardware
 
Quote:

Originally Posted by BLT-NT-BOT (Post 8189848)
PayPal sent

Got it. Will ship in the morning

Thanks

WAYNE G. 02-16-2018 11:19 PM

Re: Blazer visor hardware
 
If any are left i would like to purchase a set. Thanks Wayne

richard2717 02-17-2018 09:07 AM

Re: Blazer visor hardware
 
Quote:

Originally Posted by WAYNE G. (Post 8189985)
If any are left i would like to purchase a set. Thanks Wayne

I have sold out of this test run but have ordered enough for 30 more sets that should be here in a few days. I will pm you when they arrive or you can go ahead with payment & I will ship out same day they come in, your choice.

Thanks
Richard

frankinstein 02-17-2018 09:47 AM

Re: Blazer visor hardware
 
I will take three sets when they come in.

blazn71 02-17-2018 12:20 PM

Re: Blazer visor hardware
 
I would like 2 sets

WAYNE G. 02-19-2018 02:52 PM

Re: Blazer visor hardware
 
Quote:

Originally Posted by richard2717 (Post 8190196)
I have sold out of this test run but have ordered enough for 30 more sets that should be here in a few days. I will pm you when they arrive or you can go ahead with payment & I will ship out same day they come in, your choice.

Thanks
Richard

Richard, thanks for the update on parts and I went ahead and paid for mine. Thanks again, Wayne G.

frankinstein 02-19-2018 04:49 PM

Re: Blazer visor hardware
 
Paypal funds sent

richard2717 02-19-2018 04:54 PM

Re: Blazer visor hardware
 
The bolts came in today and I expect the screws to be here in the next day or so.

Thanks guys. They will ship same day they get here.

Richard

bmfm64 02-19-2018 07:57 PM

Re: Blazer visor hardware
 
Any left?

richard2717 02-19-2018 08:00 PM

Re: Blazer visor hardware
 
I should have enough for 30 more sets in the next day or so. Part of the order came in today

a1vintage69 02-21-2018 12:09 PM

Re: Blazer visor hardware
 
Richard, got mine. very nice! ttt bump thanks, a1

rsavage 02-21-2018 01:17 PM

Re: Blazer visor hardware
 
Received mine too yesterday. Thanks for doing this Richard.

Rawhedrex 02-21-2018 07:31 PM

Re: Blazer visor hardware
 
Quote:

Originally Posted by richard2717 (Post 8189447)
They will ship this morning
Thanks

Received mine yesterday. Thanks again!

richard2717 02-22-2018 06:13 PM

Re: Blazer visor hardware
 
Quote:

Originally Posted by frankinstein (Post 8190215)
I will take three sets when they come in.

Quote:

Originally Posted by blazn71 (Post 8190351)
I would like 2 sets

The rest of the hardware came in today. They are packaged up and will ship out in the morning.


I have enough to do 25 more sets for those that are interested.

richard2717 02-28-2018 05:12 PM

Re: Blazer visor hardware
 
TTT got plenty more ready to ship


All times are GMT -4. The time now is 04:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com