![]() |
1972 K20 Custom Deluxe "Bruce"
Just as most of my truck stories start out, "We bought this truck to fix up and flip for a profit, now my wife and I are getting attached and likely wont be selling it for a while." :lol:
Here is the back story: My buddy Ken (52Napco) put me on to this truck back in January. I think he bought the truck out of Oregon and had it shipped to SC, after it got to the east coast it exchanged hands a few different times and the guy who had the truck was ready to sell. I drove down to SC one evening after work and checked the truck out in person. We struck a deal and I drove it home. When cleaning the truck out I found a business card for a tree cutting service in Sacramento, CA which would make sense since it has a Fremont indication on the SPID. So my best guess is it was born and raised in Northern CA, at some point made it to Oregon and then obviously to to the east coast. I also know that the truck had an over the cab camper shell for most of its life which would explain the bed rail "patina". At some point the truck was repainted, the seat cover was replaced, and someone put a tach dash and an am/fm radio in the truck (all not factory to the truck). My plan is to return the truck to a factory appearance while making some slight modifications / upgrades along the way. |
Re: 1972 K20 Custom Deluxe "Bruce"
3 Attachment(s)
How about some pics. Here are the first few I got before seeing the truck in person
|
Re: 1972 K20 Custom Deluxe "Bruce"
Looks really nice. Post more pics when poss. I'd appreciate some pics when poss of the OEM routing for the aux tank fuel lines if intact.
|
Re: 1972 K20 Custom Deluxe "Bruce"
5 Attachment(s)
The main reason I wanted this thing was how solid it is. The only rust I found on the truck was the pass side rocker panel
|
Re: 1972 K20 Custom Deluxe "Bruce"
1 Attachment(s)
Knowing this truck came from Oregon I had to find an Oregon dealership keychain so I turned to eBay and ended up with this. Once my wife got ahold of it the name stuck
|
Re: 1972 K20 Custom Deluxe "Bruce"
3 Attachment(s)
First on my list of changes was the wheels. Fortunately the truck came with a set of 16x8 steelies so I had them blasted, painted with rustoleum, and mounted on the truck
|
Re: 1972 K20 Custom Deluxe "Bruce"
2 Attachment(s)
Before and after the steelies. I ended up going with 285/75/16s for the tires. They barely clear the front fender but so far I haven’t had any rubbing
|
Re: 1972 K20 Custom Deluxe "Bruce"
1 Attachment(s)
Then hubcaps
|
Re: 1972 K20 Custom Deluxe "Bruce"
2 Attachment(s)
One of the “factory” appearing changes that I wanted to make was the addition of lower trim. I know it’s wood grain and not black which isn’t correct for a custom deluxe but it’s what I had and I really like the wood / blue look. I’ve only done the drivers side so far but I think it’s definitely the right move
|
Re: 1972 K20 Custom Deluxe "Bruce"
4 Attachment(s)
Next on the list was rust repair. I cut her open and used a spot sand blaster to kill the heavy surface rust. Then I soaked everything in ospho overnight
|
Re: 1972 K20 Custom Deluxe "Bruce"
4 Attachment(s)
More rust repair
|
Re: 1972 K20 Custom Deluxe "Bruce"
3 Attachment(s)
Rust all fixed
|
Re: 1972 K20 Custom Deluxe "Bruce"
Quote:
|
Re: 1972 K20 Custom Deluxe "Bruce"
4 Attachment(s)
Probably the best part about this truck is how well it drives. It has tons of power, the steering is tight, all of the lights and accessories work perfectly, it starts right up and idles perfectly. I’ve had it for 3 months now and I’ve put almost 2,000 miles on it. Here are a few photos
|
Re: 1972 K20 Custom Deluxe "Bruce"
3 Attachment(s)
And finally, yesterday’s project. I had a local paint store scan the front fender and mix up some color matched paint for me. I blended some spots and completely repainted others. I’m gonna let it cure for about a week and then I’ll cut and buff the entire truck to blend it all in. It’s hard to tell comparing the old dry paint next to the new wet paint but the color is almost perfect. Should work pretty well, anything will be better then the old primer spots :lol:
|
Re: 1972 K20 Custom Deluxe "Bruce"
2 Attachment(s)
Here’s a good example of how it will blend. I hit the tape line with 1,500 grit to blend it back and then polishing compound on the buffer. Before and after
|
Re: 1972 K20 Custom Deluxe "Bruce"
Ooh I forgot to mention the am\FM and tach dash didn't go with it
I'll swing by this weekend. |
Re: 1972 K20 Custom Deluxe "Bruce"
Paint touch up looks good.
|
Re: 1972 K20 Custom Deluxe "Bruce"
5 Attachment(s)
Quote:
|
Re: 1972 K20 Custom Deluxe "Bruce"
Quote:
|
Re: 1972 K20 Custom Deluxe "Bruce"
Your blend job is great! I presume you used a single stage paint? What are your ultimate plans for this truck? Since its such a solid driver as is if it were mine I'd be hard pressed to tear it apart... Beautiful collection of GM's Andrew.:chevy::gmc2:
|
Re: 1972 K20 Custom Deluxe "Bruce"
That was quick. Big thanks for the photos. Is the rock shield there to protect the tank selection valve?
Great work. Excellent addition to the herd and good to see it used as intended. Lower molding looks good. |
Re: 1972 K20 Custom Deluxe "Bruce"
Quote:
|
Re: 1972 K20 Custom Deluxe "Bruce"
Quote:
|
Re: 1972 K20 Custom Deluxe "Bruce"
It does look solid but when you take that rocker off you will probably find the outer floor edge is bad too. You can get an outer floor replacement strip from Classic Industries that runs from the toe board to the rear of the cab. I would cut it out and replace it. The floor piece is formed just as the floor is from the factory, it has the back inside of the rocker attached to it.Take lots of pictures of everything as you take it apart to show where its welded, how it fits together, ect.
|
Re: 1972 K20 Custom Deluxe "Bruce"
nice looking rig! wish I had your skills for sure mine is in about the same condition yours started
When its all said and done I want to add the white cab and just the upper molding Keep up the good work |
Re: 1972 K20 Custom Deluxe "Bruce"
I really like this truck. Nice work so far.
|
Re: 1972 K20 Custom Deluxe "Bruce"
Quote:
Quote:
|
Re: 1972 K20 Custom Deluxe "Bruce"
Can't wait to see the progress!
|
Re: 1972 K20 Custom Deluxe "Bruce"
Quote:
|
Re: 1972 K20 Custom Deluxe "Bruce"
4 Attachment(s)
Finally got around to polishing this old girl up. I wet sanded and polished the entire truck, then a good wax and buff to seal it all up. I’ve finished the pass side, half of the hood, and half of the drivers side, hoping to wrap up in the next day or so.
|
Re: 1972 K20 Custom Deluxe "Bruce"
2 Attachment(s)
Also decided it was time to install some sound deadener in the cab and finish my carpet install. I’m planning on driving this old girl down to Charlotte in a few weeks for the Piedmont C10 Cruise so I felt like a few dollars spent on sound deadener might be worth while. I used a cheaper product that I found on amazon called Noico, it was $65 for 36sf instead of $170 for Dynamat
|
Re: 1972 K20 Custom Deluxe "Bruce"
Sure is pretty!
|
Re: 1972 K20 Custom Deluxe "Bruce"
3 Attachment(s)
Today I finished the sound deadener and put the carpet in
|
Re: 1972 K20 Custom Deluxe "Bruce"
That is one beautiful truck. I'd love to have a K20 or even a C20 longbed to haul stuff in, but it wouldn't be nearly as nice as yours!
|
Re: 1972 K20 Custom Deluxe "Bruce"
1 Attachment(s)
One more with the seat in
|
Re: 1972 K20 Custom Deluxe "Bruce"
Looks great!
Share your thoughts on that sound deadener once you log a few miles. Thanks |
Re: 1972 K20 Custom Deluxe "Bruce"
I'm jealous....looks very good
|
Re: 1972 K20 Custom Deluxe "Bruce"
Great looking rig!
|
Re: 1972 K20 Custom Deluxe "Bruce"
Oh I like this. Nice truck. I've got a 1970 version of this...Z62, 538 white/dk blue. So this fires me up! Thanks for all the pics. Would love to see some engine bay pics, especially if original.
|
All times are GMT -4. The time now is 01:02 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com