Motorhome Tilt Column, bolt in ready
5 Attachment(s)
$250 local, $300 shipped
Please respond in thread only per board rules, first "I'll take it" gets it. Selling a motorhome tilt column. From a mid 80s GM chassis I moved the NSS down so it's a bolt-in for your 67-72; I used my multi-meter to adjust it, you may need to fine tune it after install. Turn signal has no lever Turn signal switch is tight and cancels as it should Includes the cancel cam The gray illumination wire is fairly long Includes a long pigtail for the Neutral Safety/Reverse switch Tilt mechanism is tight and smooth. The 4 bolts in the tilt mechanism that typically loosen over time have been removed and reinstalled with lock-tight. Tilt pivots were cleaned and lubed when removed to tighten the bolts. The bottom bearing was cleaned and greased The upper bearings were cleaned and greased The shift indicator bulb was replaced and tested OK, it has the green shade on it. Shifter lever end (inside column) is good, pivot is average Shift arm and adjuster lever have nice chrome, they shine up well. The finish on it is OK, great for a driver. Some scratches as pictured. It would probably buff out nicely. I will include a new GMC Paul's gear indicator, pics are with the old original You will need to add your dash and firewall gaskets, as well as the firewall plate. |
Re: Motorhome Tilt Column, bolt in ready
4 Attachment(s)
More pics
|
Re: Motorhome Tilt Column, bolt in ready
I'll give you 250.00 shipped. Please let me know. WES
|
Re: Motorhome Tilt Column, bolt in ready
Can we meet in the middle at $275?
|
Re: Motorhome Tilt Column, bolt in ready
PM returned. Yes we can meet in the middle. WES
|
Re: Motorhome Tilt Column, bolt in ready
Sounds great
Sold to Wes |
Re: Motorhome Tilt Column, bolt in ready
PM sent. Shipping out tomorrow.
|
All times are GMT -4. The time now is 01:56 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com