S10 fuel pump cutout
3 Attachment(s)
While i recommend pulling the bed, some have asked for measurements for a proper cut.
Pictures speak volumes Regular Cab, short bed cut 14" to 22" from driver side wall |
Re: S10 fuel pump cutout
Great info! Thanks!
While pulling the bed used to be no big deal, I don't have the room I used to when I was working in dad's shop. As long as one can fix the hole properly, this makes a job that once was a real chore a pretty easy process. I'm sure there are lots of other guys in the same boat I am with not much time, help, or room to pull a bed, but can cut a hole like nobody's business :lol: |
Re: S10 fuel pump cutout
Pull the bed? Drop the tank.
|
Re: S10 fuel pump cutout
My brain defaults to the bed, pulling those 6 bolts and wrangling a good helper always was my preferred method vs jacking up the truck, then half dropping a 100 pound tank full of gas after you broke the straps then fanagling the hoses and wires loose before you break something. :lol:
I'll never understand why more vehicles didn't come with the fuel pump access panel that some cars had under the rear seat. |
All times are GMT -4. The time now is 05:28 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com