The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=4)
-   -   Paint questions (https://67-72chevytrucks.com/vboard/showthread.php?t=839944)

tantrumpipeline 11-23-2022 08:52 AM

Paint questions
 
I haven't been on here in forever and can't find what I'm after in the search bar. Approx how much base and clear will it take to do a 77 swb in a solid color? I was figuring 5qt as that's about what my 68 took but this truck has a bedined bed I'm leaving as is and a little extra paint beats not enough. I'm in canada but where are y'all getting your paint from as well? TIA

Ziegelsteinfaust 11-24-2022 01:22 PM

Re: Paint questions
 
I just painted my 65 G10 van with with the Valspar industrial version which makes 1.5 gallons of paint when mixed up. Even though I figure 8'd back to the starting point 3 times with re-tints. I have 3 coats on it with a comfortable. 6 gallons left of the base mix. So a total .8 gallons roughly of mixed paint left.

So a gallon of mixed paint should should do you up pretty good.

My paint is single stage.

old Rusty C10 11-24-2022 03:21 PM

Re: Paint questions
 
using Nason Pint i used 5 quarts on my 1979

tantrumpipeline 11-25-2022 12:22 AM

Re: Paint questions
 
Awesome info thanks guys


All times are GMT -4. The time now is 01:23 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com