Re: My '67 Fleetside C10 renew
 

Chip talked us off the edge. Progress!!

Re: My '67 Fleetside C10 renew
 

Looks awesome!

Re: My '67 Fleetside C10 renew
 

Just keeps getting better, John. That metallic should really pop in the sun!

Re: My '67 Fleetside C10 renew
 

Thanks for the comments! I was going to roll that hood outside for a photo but we got a good RAIN! We've been socked in with smoke for a month anyways, so I still haven't seen the real color. As soon as we have a nice clear day I will.

Re: My '67 Fleetside C10 renew
 

Found a couple in Fathom Green at Goodguy's...

Re: My '67 Fleetside C10 renew
 

Coming together, can't wait to see it outside!

Re: My '67 Fleetside C10 renew
 

The buff continues! Knucks has done 90% of the sanding and buffing. There are a few small areas that need a little more love but we were able to pin the cab down for good and assemble the front clip. Gaps look great, super happy! Went to the box stores looking for S4S oak but that was an $1100 ticket - F that! I'm going to have to go to the other lumber store and get some 4/4 live edge to do the bed floor. My neighbor has an overhead sander, we'll see how well we get along! I know he's got a four wheeler that won't start... I also got my big box from Summit (finally). The little mouse is going together but still have some details to work out. The fires out here are piddling out and we're getting back on the bikes so weekend truck time will be cut but winter is right around the corner!
Stay tuned, boys!.

Re: My '67 Fleetside C10 renew
 

Congratulations, man. You two have every right to be proud of that one. Great looking job.

Re: My '67 Fleetside C10 renew
 

X2 !!

All that hard work is paying off, it's a looker.

Re: My '67 Fleetside C10 renew
 

Thanks, dudes! The weather has allowed us to get back out in the woods, so truck time has been limited. Pissing rain now, so I went and bought some Red Oak for the bed floor. I'm really looking forward to this piece of the puzzle! Like I said, it's pissing rain. These boards got a little wet, so I'm letting them dry for a minute before I start milling them. I'm on bbq duty right now, Knucks is taping that motor up for some paint! Pics coming...

Re: My '67 Fleetside C10 renew
 

No riding today! We're going to get rolling on this thing again. I used the dimensions off GMC Paul's bed wood pages. We'll see!

Re: My '67 Fleetside C10 renew
 

Got this about like this now too! Gotta sort out valve cover gaskets, then mill the spacers as much as I can. I've got the Pro-Billet dizzy and wires that I'm going to fit up while it's on the stand. I'm running the wires down, then up the bell housing.

Re: My '67 Fleetside C10 renew
 

Awesome! Coming along, you'll be driving it in no time.

Re: My '67 Fleetside C10 renew
 

Nice progress! You’ll be ready for spring

Re: My '67 Fleetside C10 renew
 

Looks great!

Re: My '67 Fleetside C10 renew
 

Looks slick!

Re: My '67 Fleetside C10 renew
 

Man, life is a whirlwind! I'm whizzing through my 50's, still trying to impersonate my 20-something self. I'm dusting this thing off again, swear I'm going to drive it in '23. We definitely made it further than I last updated here but it hasn't been touched in several months. I gave the shop a good clean-up last weekend, then started trying to pick up where we left off. I'm struggling with engine accessory brackets and wire harnessing / routing. We laid some stuff out and looked at a bunch of photos on the web. We have a plan.

I'm just going to photo dump here to try and get this thread up to speed. I'm sorry that I haven't been able to keep it fresh.

:chevy::chevy::chevy:

Re: My '67 Fleetside C10 renew
 

More...

Re: My '67 Fleetside C10 renew
 

Is that a Tarantula intake?

Re: My '67 Fleetside C10 renew
 

I believe it is, John. TM1

Re: My '67 Fleetside C10 renew
 

Yes TM1 is the Tarantula intake.