how to lower a 67 chevy
any info or pics on how to lower a 67 in any way will start me off
thanks ------------------ 1967 Chevy C 10 Custom 350 800 cfm 467 lift 278 dur ported&pollished 2400 stall 350TH working hood scoop B&M shifter |
just log onto early classic enterprises,decide on u're drop and go from there.that's about the easiest.bob67cst.
|
the question is HOW LOW DO YOU WANT TO GO? for a not to low but still kickass stance do a 2/4 with lowering coil springs if you want to do a disk brake conversion at the same time get the 2.5" drop spindles for a 2.5/4 drop if you want a real low one go for 4.5/6 thats with rear lowering coils and 2.5" front drop spindles and 2" lowering coils up front you will need a adjustable panhard bar and/or a c notch for this much drop... if you want LOW look into airbags...
oh and im moving your topic to the suspensien forum http://67-72chevytrucks.com/board/ubbhtml/smile.gif ------------------ www.xframeimpala.com 68 4x4 short fleetside deluxe cab 327 air 56 big window short stepside 235 dual 1 brls 64ImpalaSS 327 70 C10 LWB fleetside custom/10 350/TH350 |
These trucks can be easily dropped about 3/4 with just springs. I dropped mine 3/6 with springs and a flip kit (I have leafs in the rear). Here is a pic for you.
http://people.clemson.edu/~nanthon/t...exterior12.jpg ------------------ 1970 C10 -Worked 350 -Dropped -Tangier Orange Paint -Much Much More Check out my web site: http://people.clemson.edu/~nanthon/truck/ College student at Clemson (SC) Home in Langhorne Pa |
All times are GMT -4. The time now is 07:31 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com