The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 6 of 6 12345 6
Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)
-   projects and builds (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=197)
-   -   1964 C10 Survivor (https://67-72chevytrucks.com/vboard/showthread.php?t=812167)

The Rocknrod 05-30-2021 12:13 PM
Re: 1964 C10 Survivor
 
Nice truck. The seats look great.

Low Elco 06-16-2021 11:22 PM
Re: 1964 C10 Survivor
 
Great lookin' work!

Paul Y 06-17-2021 07:09 AM
Re: 1964 C10 Survivor
 
I am blatantly stealing your intermittent wiper function and claiming it as my own.

Woody is still some way from hitting the road again but this is a really good upgrade that means I can, like other, use my truck as a truck in all weathers.

Nice.

As for the paint, in the pictures I cant see it until I look for it so wouldn't worry.

P. :D

caseyjones 06-18-2021 09:27 AM
Re: 1964 C10 Survivor
 
Quote:
Originally Posted by Paul Y (Post 8933382)
I am blatantly stealing your intermittent wiper function and claiming it as my own.

Woody is still some way from hitting the road again but this is a really good upgrade that means I can, like other, use my truck as a truck in all weathers.

Nice.

As for the paint, in the pictures I cant see it until I look for it so wouldn't worry.

P. :D
Steal all you want, friend! It makes driving in the Pacific Northwest drizzle a much better experience.

In other news I installed some polyurethane body mounts, and that was a mistake. I’m going to buy the rubber kit. These make so much noise and transfer so much vibration to the cab that I thought I broke my truck.

I also installed a headlights-on buzzer so I don’t drain my battery due to forgetfulness.

SkinnyG 06-18-2021 10:43 AM
Re: 1964 C10 Survivor
 
That seals it - I'm going to order rubber for my cab mounts. I know I'm not supper chuffed about the poly on my '77.

Headlights buzzer can be just a cheap buzzer, with + hooked to lights, and - hooked to ignition positive. When key is on, buzzer sees + on both sides, and no sound. Key is off but lights are on, buzzer grounds through the "off" ignition somewhere and makes noise. I put one in my '77 and saves my bacon all the time.

Paul Y 06-18-2021 12:00 PM
Re: 1964 C10 Survivor
 
After my thread earlier asking about rubber or poly body mounts glad to hear that I have made the right decision!

Rubber mounts are En Route, well hopefully, but that is a story for another day....

P. :D

LostMy65 06-18-2021 01:04 PM
Re: 1964 C10 Survivor
 
Yes, there is a thread in here about that. Rubber is more cushionny.

caseyjones 06-22-2021 10:54 AM
Re: 1964 C10 Survivor
 
Here we go again…new thread starting soon!
http://67-72chevytrucks.com/gallery/...933E1F628.jpeg

LostMy65 06-22-2021 11:31 AM
Re: 1964 C10 Survivor
 
Quote:
Originally Posted by caseyjones (Post 8935317)
Here we go again…new thread starting soon!
http://67-72chevytrucks.com/gallery/...933E1F628.jpeg
.
I'm pretty sure you aren't going to want to paint this one either. I think that gmc color is somewhat rare.

caseyjones 06-22-2021 12:36 PM
Re: 1964 C10 Survivor
 
Quote:
Originally Posted by LostMy65 (Post 8935336)
.
I'm pretty sure you aren't going to want to paint this one either. I think that gmc color is somewhat rare.
Correct, this one isn’t gonna get paint either. Looks like it’s had one repaint in the Palomino Tan a long time ago…hoping it buffs out pretty well…
http://67-72chevytrucks.com/gallery/...5E5B6C96E.jpeg

SCOTI 06-22-2021 01:32 PM
Re: 1964 C10 Survivor
 
8-lugger. Staying HD or going to do a 5-lug swap?

caseyjones 06-22-2021 02:25 PM
Re: 1964 C10 Survivor
 
Quote:
Originally Posted by SCOTI (Post 8935378)
8-lugger. Staying HD or going to do a 5-lug swap?
I just started a thread for this truck so this one doesn’t get too convoluted.
https://67-72chevytrucks.com/vboard/...72#post8935372

But to answer your question, plan is to convert to half-ton spec, and likely short wheelbase too.

SCOTI 06-22-2021 02:36 PM
Re: 1964 C10 Survivor
 
Quote:
Originally Posted by caseyjones (Post 8935399)
I just started a thread for this truck so this one doesn’t get too convoluted.
https://67-72chevytrucks.com/vboard/...72#post8935372

But to answer your question, plan is to convert to half-ton spec, and likely short wheelbase too.
:thumbs:

LostMy65 06-22-2021 04:23 PM
Re: 1964 C10 Survivor
 
Quote:
Originally Posted by caseyjones (Post 8935399)
I just started a thread for this truck so this one doesn’t get too convoluted.
https://67-72chevytrucks.com/vboard/...72#post8935372

But to answer your question, plan is to convert to half-ton spec, and likely short wheelbase too.
I was going to tell you if you were thinking of keeping it a 3/4 ton, I have the perfect donor for you.
My 66. :) Disc brakes, power steering, 14-bolt rear.

caseyjones 10-04-2021 01:02 AM
Re: 1964 C10 Survivor
 
http://67-72chevytrucks.com/gallery/...EF43CABA3.jpeg

While I'm working on the GMC, I'm just racking up miles on this truck. It's been so good all summer.

caseyjones 11-09-2021 01:41 AM
Re: 1964 C10 Survivor
 
Driving this thing rain or shine. More rain than shine lately.


http://67-72chevytrucks.com/gallery/...6908AD890.jpeg

jkeating1 11-09-2021 02:17 PM
Re: 1964 C10 Survivor
 
I approve!

LostMy65 11-09-2021 02:41 PM
Re: 1964 C10 Survivor
 
Oh No! Park it. Store it away and only bring it out for car shows and special occasions for others to see and say 'ooohh ahhh'. That's the purpose of a classic vehicle. Like Jay, you need 1000's of sq ft of ooohh ahhh vehicles.

C10matt 11-10-2021 02:46 PM
Re: 1964 C10 Survivor
 
That's a good looking truck.

caseyjones 10-25-2022 05:17 PM
Re: 1964 C10 Survivor
 
New chapter to the story...this truck is going to a new home about 4 hours north. It's been a great truck but I can't keep it inside while I have other projects and I don't want to watch it deteriorate. I hope the new owner enjoys it!

Arne 10-25-2022 08:45 PM
Re: 1964 C10 Survivor
 
This has been a good read, as I work on my '64 C10 rescue down south in Eugene. I didn't see any note of late transmission changes, were you still happy with the overdrive NP833 trans? That's what's in my truck now, connected to a little 305 small block V8.

Quote:
Originally Posted by caseyjones (Post 8926672)
I never really detailed it out so here we go...I looked at the options on the market - the crazy expensive kit with a new motor, or the add-on box that required a bunch of twists of the wiper knob to "program" the delay, and I didn't like either one.

I decided to go with the old 555 timer delay solution, even though it requires an extra knob. I bought this little delay board:
https://www.amazon.com/12VDC-Windshi...48975422&psc=1
http://67-72chevytrucks.com/gallery/...elay_board.jpg

I de-soldered the potentiometer and bought these:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
http://67-72chevytrucks.com/gallery/...entiometer.jpg

The original switch works just like it did before, and the new switch works independently to turn on the wipers and sets a delay between 3sec and 30 seconds. Totally worth the $35 or whatever.
Ahh! This could be the answer for me! Add intermittent wipers (as noted, a big plus around these parts), plus I should be able to mount the remote pot in the soon-to-be-unused choke cable hole (after the conversion to electric choke is complete). Good stuff!

caseyjones 10-25-2022 10:40 PM
Re: 1964 C10 Survivor
 
Quote:
Originally Posted by Arne (Post 9137455)
This has been a good read, as I work on my '64 C10 rescue down south in Eugene. I didn't see any note of late transmission changes, were you still happy with the overdrive NP833 trans? That's what's in my truck now, connected to a little 305 small block V8.
I think you'll love that transmission. It worked really well with my setup, and I'd totally do it again...in fact, I have a spare transmission, just need the shifter and bracket!

Arne 10-25-2022 11:14 PM
Re: 1964 C10 Survivor
 
Quote:
Originally Posted by caseyjones (Post 9137483)
I think you'll love that transmission. It worked really well with my setup, and I'd totally do it again...in fact, I have a spare transmission, just need the shifter and bracket!
Cool. I've still not driven my truck yet, but getting close. Need to get it to DMV (CA title) and to a muffler shop.

Arne 10-26-2022 01:44 AM
Re: 1964 C10 Survivor
 
Quote:
Originally Posted by caseyjones (Post 8926672)
Don't use the schematic that comes with the instructions for the board, it won't work on our systems.
Do all these trucks switch the ground at the wiper switch? My truck has single speed wipers with no washers, and only has a single wire to the switch, so it must be switching ground, not hot.

caseyjones 10-26-2022 06:43 PM
Re: 1964 C10 Survivor
 
Quote:
Originally Posted by Arne (Post 9137534)
Do all these trucks switch the ground at the wiper switch? My truck has single speed wipers with no washers, and only has a single wire to the switch, so it must be switching ground, not hot.
I believe that is the case.


All times are GMT -4. The time now is 06:53 PM.
Page 6 of 6 12345 6
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com