slamburban
 

here i removed the engine and stock front suspension. i had charley at charleys drop shop 5140 se circle ave portland oregon 97236 503-780 2155 put in a jw rod garage ifs with 2"drop spindles and air bags. i wanted it an inch off the ground. so to get the ride height, he had tp the notch the ifs crossmember up into the stock frame 1 3/4 inches

Re: slamburban
 

Very NICE work!
What do you have planned for the rear suspension?

Re: slamburban
 

check it out. i just posted more pics. let me know what you think. all i know is its going to ride like a lincoln

Re: slamburban
 

looking good. oh! just to let you know, you can post all of your updates and pics in the same thread instead of making a new one everytime. you just have to click the go advance button below the box that you type in at the bottom of the page in your thread

Re: slamburban
 

So how tall are the tires u going to run and did u just raise up the bottom cross member to getit how u wanted and did u raise the top hats to
Posted via Mobile Device

Re: slamburban
 

He has a more complete build thread here.

http://67-72chevytrucks.com/vboard/s...d.php?t=449539

Re: slamburban
 

1950foru i accidently start this thread. i will post you anwser on the regular 1947 -1959 message board under slamburban

Re: slamburban
 

Re: slamburban
 

very cool! will follow your progress...