Cargo panel material
What are guys using to make up your cargo panels with? Built the bed up with the tops of old rusted out doors, so stock material want work because there gonna be taller.
Got any idears, Thanxs |
Re: Cargo panel material
PVC board 4 x 8 sheet about $100 for 1/2"...also comes 3/8" + 3/4" and it's paintable.
|
Re: Cargo panel material
Quote:
Thanxs |
Re: Cargo panel material
Possibly at Home depot, or other building supply, Azek is a name brand I used smooth on both sides, photos on post 21 on my build page.
|
Re: Cargo panel material
3 Attachment(s)
I used textured black ABS plastic sheet....3/16" thick with push-on vinyl edge trim and aluminum "J" channel at the top
Attachment 2222944 Attachment 2222945 Attachment 2222946 |
Re: Cargo panel material
Quote:
Thanxs |
Re: Cargo panel material
Quote:
I also have a .pdf file of the dimensions if you need it |
Re: Cargo panel material
I was looking to use HDPE - 1'8" thick. I believe 1 sheet (4' x 8') can be cut down and will cover both sides - haven't measured to be sure though. Waterproof, available in white/black, etc.
Link to Menards product - here Let us know which route you go...need to do this in the future as well. |
Re: Cargo panel material
The only thing with my build is I've built the bed up so its probably 3 or 4 inches taller than a stock blazer. I like the idear of 3/16 thickness and also in red. Is this out there guy's?
Thanxs fr any direction in this product. |
Re: Cargo panel material
A1971Blazer - can you PM me the PDF - will be doing this at some point as well
thanks |
Re: Cargo panel material
2 Attachment(s)
Quote:
|
Re: Cargo panel material
Quote:
|
Re: Cargo panel material
Quote:
I do have a sign company near me and will look into that. |
All times are GMT -4. The time now is 11:49 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com