84 c20 burb drop??
 

want to drop it low but dont want to z frame
want to do 4link with bags in rear and notch
have to keep 3rd seat (6 kids)
most ?'s are what to do in front
arms and bags spindles
this will be my daily driver
and make monthly trips from va to pa

Re: 84 c20 burd drop??
 

if i z the frame what else needs to be done
lower motor mounts,steering
exhaust?
I assume i will lose my inner fenders
what else will need to be removed or
moved
also rad to motor what about hoses
and ac lines

Re: 84 c20 burd drop??
 

looks like i going to do a static drop for now
what parts work best to get
3" spring
3" spindle
6-8"flip kit
(want to sit low but level)
going to run16" front 18" rear stealies

Re: 84 c20 burd drop??
 

Is this the Haiku thread?

Re: 84 c20 burd drop??
 

I guess I should have said...

Is this thread Haiku?
Everything is in short bursts
This line's meaningless

Re: 84 c20 burd drop??
 

lol just wanted to know what thing work together and what dont i'll try to keep it long lines for you to read
?if it matters 99% of the time truck will have 2 adults and six kids
(750lbs total) 300lb front / 140 mid / 265 rear
now im tring to draaaaaaaaaaaaaawwwww this out to fill space
i dont think 400lbs in rear will change much
:new: :but: I do my own work sold my yota's to build on my ex tox rig

Re: 84 c20 burd drop??
 

Flip, springs, and spindles
Load capacity remains
Search this forum well

Re: 84 c20 burd drop??
 

well price in parts for static drop is about 3/4 the price of a full bag kit may just wait till spring and bag it
airbagit kit was $1400 looked have every thing i need to bag it
any body sell a better kit

Re: 84 c20 burd drop??
 

get suicide doors starter kit w 3/8 for 899 i think. you can do a different rear setup than me and it might be a little easier. in front just get sd. cups and cut them down a bit, and 3 " spindles. loose inner fenders. that should have you laying crossmember in front.

Re: 84 c20 burb drop??
 

***************** is where its at.

Re: 84 c20 burb drop??
 

tom coop post up when you do your front susp with pics
how much do you cut out of the cups any pics or links
what spindles are best for the price

Re: 84 c20 burb drop??
 

i wont cut my cups till i get spindles but i will post up pics. not sure how much im gonna cut yet and havent decided on spindles but im yhinking abouy djm