WTB: 63-66 Clutch pedal, z-bar, linkage
 

Hey everybody -
Looking for a clutch pedal, linkages, z-bar and frame bracket for the z-bar from a small block or 6cyl truck, 63-66. Swapping out my 305 V6 in my GMC to a small block and the GMC clutch setup is all V6-specific.

Thanks!

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

I have one that came off a 65 with 292.

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

I have that stuff - just converted my 64 to a TH400. Let me know if I can help.

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

Thanks guys. I’d need it all shipped to 97217…please let me know what you want for the parts and shipping. Tchevs, do you have the full set of parts or just the pedal?

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

You can have whatever parts I have for free, you would just need to pay shipping. I'd rather see someone use it than see it scrapped. I can get photos of what I have tomorrow. I have clutch pedal and z-bar for sure, I think I have the frame bracket, I have the ball stud that mounts on the engine block, and I have the fork & stud from the bellhousing if you need them. For the linkage from z-bar to fork and z-bar to pedal, I had converted my truck to tubular rods with heim joints. You can have that too if needed or wanted.

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

Wow, that’s super generous of you. I’ll take it all except for the fork and stud from the bellhousing…already have that. I’ll send a PM with my info. Thanks!

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

I'll post some photos tomorrow

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

Attachment 2227919

Top to bottom;

z-bar
spring
z-bar to clutch fork
z-bar to pedal
Pedal assembly

I didn't see the ball stud for the z-bar, but it's probably laying around somewhere. As far as the frame bracket for the z-bar, it is riveted to the frame. I can grind the rivets off and get it for you, but will honestly be a couple of weeks before I can get to that. I'll find a box to hold all this stuff for shipping and we can go from there.

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

That’s perfect-I’m in no big hurry if you’re really willing to remove the frame bracket too. I’ve got a lot of prep work to do before I can put the new engine in. Or maybe somebody else has the frame bracket kicking around???

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

I found the ball stud. I'll try to find a box in the next couple of days and get a shipping cost.

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

Found a box & packed up all shown above (plus ball stud) for shipping. Will send out either Saturday or Monday. Also replied to your PM, thanks!

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

Thanks Mike!

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

Parts were shipped out Saturday, hopefully you'll get them in a day or two.

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

Got the care package today, and check for shipping will go out in the mail tomorrow. Thanks again Mike!

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

My bad, been out of town and off the grid for several days. Glad you got the parts OK. Shipping was $47.30.

Re: WTB: 63-66 Clutch pedal, z-bar, linkage
 

Check arrived in the mail yesterday, thanks!