Floor Shifter reverse light switch
Has anyone done this before that can give me some insight and some ideas as to how to go about this?
I have a Saginaw 3 speed trans that has been converted to floor so I need to find a way to wire up a backup light switch. I have a new American Autowire harness ready to install after paint and want to know before I get knee deep in this what exactly it is I need to do. Thanks. |
Re: Floor Shifter reverse light switch
Do you still have the 3ott column?
If so just slide it into reverse and see if the back up lights work. The switch is on the bottom of the column inside by the firewall. |
Re: Floor Shifter reverse light switch
I actually dont have my old harness in. The truck is stripped for paint
|
Re: Floor Shifter reverse light switch
OK, but do you have the 3ott column?
The switch will still be there. |
Re: Floor Shifter reverse light switch
I imagine whoever made the floor shifter offers a switch. If not, try Hurst's web site.
|
Re: Floor Shifter reverse light switch
I would wire up a toggle switch , on/off when you need it
|
Re: Floor Shifter reverse light switch
easiest way to hook it up to work automatically would be to find shift cover off of a trans with a back up switch. Drain the trans , switch covers, refill with oil, and extend the wiring.
|
All times are GMT -4. The time now is 01:38 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com