Re: 63-87 rack and pinion
 

You can see the upper shaft connecting to the column and top u-joint.

Re: 63-87 rack and pinion
 

Using factory G.M. lines, we plumbed the power steering hoses.

Re: 63-87 rack and pinion
 

This looks better than my wife's rack. Heres my credit card number
4756 9693 1245 1965 ex 01/65 . Just kidding looks awsome .

Re: 63-87 rack and pinion
 

SEKSEE! How much clearance between TREs and framerails? I.e: how much can you section the crossmember before you have clearance issues? Looks nice :cool:

Re: 63-87 rack and pinion
 

Our 72 JT is running this. We raised the crossmember 1 1/2". And there is no need to 'C' for TRE clearance. When this install is done, I'll measure it for you, this will have all of the production parts on it. Should be done on friday.

Re: 63-87 rack and pinion
 

Here's the last steps. We finally recieved the adjuster sleeves today! The hex shock is threaded with 5/8" x 18 on one side, and 14mm x 1.5 on the other. We then had them heat treated. Tie rod ends are high-mis-alignment 5/8" chromoly.

Re: 63-87 rack and pinion
 

What is the latest on this install? Any idea what it is going to cost?

Re: 63-87 rack and pinion
 

Sorry about that... power went down, couldn't get to the pictures

Here you go............
Step 2
Start by removing the spring clamps on the rack boots

Re: 63-87 rack and pinion
 

Thread the rod end into the adjuster sleeve. Leave approx 1/4" of thread showing, tighten the jam nut - TIGHT!

Re: 63-87 rack and pinion
 

** Thread the adjuster sleeve onto the inner tie-rod end. Leave approx 1" of thread showing. Leave the JAM NUT Loose

Re: 63-87 rack and pinion
 

Bolt the new tie-rod assembly to the bottom of the steering arm. The large U.S.S. washer installs on the bottom, as a saftey stop for the rod end.

Re: 63-87 rack and pinion
 

The Complete Install. Toe adjustment is made between the inner tie-rod end and the adjuster sleeve. Don't forget to put the spring clamp back on for the rack boot. For smooth cruisers, set toe at - 1/8" . For more spirited driving, try 1/8" toe out.

Re: 63-87 rack and pinion
 

just what I've been waiting and looking for.....now just need to dig up the scratch to pay for it.... :lol:

Re: 63-87 rack and pinion
 

very nice product and write up Rob, glad it is coming together.

Re: 63-87 rack and pinion
 

Any way we can get pics of this? Did you section the crossmember or Z the frame? Thanks, Jon.

Re: 63-87 rack and pinion
 

How much is the kit and when will it be available.

Re: 63-87 rack and pinion
 

What kind of rack and pinion are you using for this set up? Looks great, just what I am looking to upgrade next on my truck.
Posted via Mobile Device

Re: 63-87 rack and pinion
 

Whats the price?
Posted via Mobile Device

Re: 63-87 rack and pinion
 

http://67-72chevytrucks.com/vboard/s...d.php?t=441047 check out this thread it will tell you guys what you need to know

Re: 63-87 rack and pinion
 

Rob- any movement on the "isolator" delivery?

Re: 63-87 rack and pinion
 

All the parts are in, and all current orders have shipped. Thanks for the patience. We're all really happy with how this turned out. Hopefully our extra work will provide many truckers with years of happy cruising. Now, how long will it take the others to copy?? ;)

Re: 63-87 rack and pinion
 

I am curious about this too. It will happen, I am sure someone will copy this. It's too bad, but I am sure it will happen.

On the plus side, you guys did an awesome job and are offering a great product, so kudos :metal:

Re: 63-87 rack and pinion
 

Thanks. I know it will happen too. I hope that joking about it ahead of time will put the copiers on notice that we know they are .... can't say that word here. :)

Re: 63-87 rack and pinion
 

Hi Rob, I'm not such a gearhead but trying to understand all the info here on the board.

I'm wondering what are the benefits from your rack and pinion vs my oem power steering? Does it handle better and has it a shorter turning ratio?

thanks

Re: 63-87 rack and pinion
 

Anyone know what the price is on this setup? I didnt see it on their web site.