The 1947 - Present Chevrolet & GMC Truck Message Board Network

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- The 1960-1966 Chevrolet & GMC Pickups Parts Board (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=7)

- - OR 1964 305E V6 engine (https://67-72chevytrucks.com/vboard/showthread.php?t=840392)

caseyjones

12-09-2022 05:48 PM

1964 305E V6 engine

I’m swapping to a small block and that means I have a surplus 305E V6. The engine runs well, does not appear to burn oil, doesn’t make any bad noises, etc. I’ve set it up with a Holley carb and a new fuel pump. New plugs and wires. Flywheel resurfaced. Comes complete with bellhousing, clutch, alternator and bracket, engine mounts…basically all the specific GMC parts. Looking for $250 o.b.o. Engine is still in the truck, planning to pull it out around the start of the new year. Located in Portland, OR.

caseyjones

04-06-2023 03:53 PM

Re: 1964 305E V6 engine

Any takers for $0 without the carb and adapter? I’m going to start dismantling the motor to haul it off for scrap soon.

duallyjams

04-06-2023 05:54 PM

Re: 1964 305E V6 engine

Have you tried posting on
https://6066gmcclub.com/forumdisplay.php?f=4

I would have jumped on it except same old story, I'm on the opposite coast ( shipping )

caseyjones

04-06-2023 06:30 PM

Re: 1964 305E V6 engine

Quote:

Originally Posted by duallyjams (Post 9194152)

Have you tried posting on
https://6066gmcclub.com/forumdisplay.php?f=4

I would have jumped on it except same old story, I'm on the opposite coast ( shipping )

I would except I don’t want to pay for a membership to give away an engine ;)

duallyjams

04-07-2023 01:16 PM

Re: 1964 305E V6 engine

I posted a link in the general discussion on the 60-66 site.

All times are GMT -4. The time now is 11:40 PM.