best way to remove pin stipes and body trim??
 

i was just wondering if theres a good way to get the pinstirpe off and
the plastic pieces that are on the body.
thanks for any help.

Re: best way to remove pin stipes and body trim??
 

not sure what you mean buy plastic pieces but 3M has a wheel you put into a drill that works GREAT

Re: best way to remove pin stipes and body trim??
 

Well my truck has gray pinstripe and a chrome looking 2inch trim that is on fenders doors and bed. Think these pieces are stuck on with double sided tape. Pretty sure I can jus pull em off. Just not shure what kinda mess lies benieth.
Wife don't want me to take em off. She says it makes truck look old.
I like the original look with trim. But also like em smooth.

3m wheel can be found in pep boys?

Re: best way to remove pin stipes and body trim??
 

your going to have to post a pic of the trim...it maybe a stock clip on piece...

look for the wheel anywhere that sells paint supplies or any 3m supplier

Re: best way to remove pin stipes and body trim??
 

<a href="http://s14.photobucket.com/albums/a320/chinomio/?action=view&current=DSC02769.jpg" target="_blank"><img src="http://i14.photobucket.com/albums/a320/chinomio/DSC02769.jpg" border="0" alt="Photobucket"></a>


http://i14.photobucket.com/albums/a3...o/DSC02769.jpg

Re: best way to remove pin stipes and body trim??
 

Both come off real easy if you are planning on painting it afterwards. What is your goal?

Re: best way to remove pin stipes and body trim??
 

if there vinyl use heat gun and then denatured alcohol to remove glue

Re: best way to remove pin stipes and body trim??
 

I did mine a couple of weeks ago, (they were like that, but in worse shape), and the 3/M wheel work well and as advertised, but there is still a bit of clear film left behind, that the 3/m adhesive remover (chemical) wont remove. This weekend, I'm going to try the heat gun (on low), and plastic razor blades....:chevy:

Re: best way to remove pin stipes and body trim??
 

BTW: I fishing string'ed mine off first...