The 1947 - Present Chevrolet & GMC Truck Message Board Network - Ford Model A Tudor Modern Twist on a Classic

Page 7 of 7

« First

Show 40 post(s) from this thread on one page

The 1947 - Present Chevrolet & GMC Truck Message Board Network (https://67-72chevytrucks.com/vboard/index.php)

- Alternate Tinkerings (https://67-72chevytrucks.com/vboard/forumdisplay.php?f=140)

- - Ford Model A Tudor Modern Twist on a Classic (https://67-72chevytrucks.com/vboard/showthread.php?t=798674)

28TudorAZ

04-28-2023 07:34 PM

Re: Ford Model A Tudor Modern Twist on a Classic

Quote:

Originally Posted by Dieselwrencher (Post 9200031)

The rod looks awesome! Did you get your brakes figured out? I had a similar issue on my vette and it ended up being the MC push rod was adjusted a little too far out. When the brake fluid warmed up it applied the front calipers and they would lock on. It was the strangest thing.

I had the same thing on a 23 Bucket T where the front brakes would lock up. It ended up being the MC push rod binding just a little bit.

gigamanx

05-04-2023 02:06 PM

Re: Ford Model A Tudor Modern Twist on a Classic

Quote:

Originally Posted by 28TudorAZ (Post 9200180)

I had the same thing on a 23 Bucket T where the front brakes would lock up. It ended up being the MC push rod binding just a little bit.

Similar issue. Push rode between the booster and master cylinder was ok, but I had adjusted out the brake pedal rod thingo so it was too long. That caused the booster to sit about 50% closed when the pedal was released. Now I've gone too far the other way so somewhere in the middle will end up being my sweet spot.

daveshilling

05-06-2023 05:32 PM

Re: Ford Model A Tudor Modern Twist on a Classic

Quote:

Originally Posted by gigamanx (Post 9164671)

Wasn't happy with the seats, so why not cut my bucket seats in half and take out a section, weld them together, buy a sewing machine, learn to upholster, buy some foam, sew seat covers....
[/img][/url]

How did everyone pass up this update?! Doing your own upholstery is a pretty rare thing around here... this is awesome! Well done.

All times are GMT -4. The time now is 10:06 AM.

Page 7 of 7

« First

Show 40 post(s) from this thread on one page